I don’t know what’s better, the welding tutorial,that shows me some good options,The message to help a brother/Sister who might be lost,or struggling with something in their life.I never stop learning, when you think you are so good that nobody can show you anything, you are are already in a bind.Thank You.
Hey Brother, not only are your videos and tutorials just absolutely amazing, I’ve been fortunate to be welding pipe now for about 30 years, and I know every day that I absolutely do not know everything. But the reason why I am writing this is because your faith, and being a Christian I feel is your strongest quality. Every time I get ready to take a test, or make a critical world, I always asked the good Lord to guide my hands , and give me the knowledge and wisdom to make this weld.I try not to brag and boast, because you know when you do that’s when you mess up. I am humbled and grateful for the skills that God is given me. Just want to say thank you I try not to brag and boast, because you know when you do that’s when you mess up. I am humbled and grateful for the skills that God has given me.
That will help a lot of boiler tube welders who are watching your videos. Please show how he free hand also the other side of the pipe. Thanks for a very helpful videos!
Yall do a great job Teaching and showing people how to do different methods of welding techniques God is great! God bless you for the gift Of knowledge appreciate y’all
Really aspiring to be this good. Want nothing more than to be the best. Practice and hood time is the only way you’re going to do it. Thanks for the tutorial guys
Nice work yall welds look clean and full of quality. And to work with a company and even better a school where the owner is always around talking with the students working with the team is in my opinion a real open door 🚪 work environment!!
25 years ago when the pipe was getting too hot i did really freehand, no touching used the electrode welding gloves, wonder if i could still do it, trembling hands now
Thats a nice looking cap on the last one ......hell all of them were pretty sweet, mans got the skill. Hope he has time to do a video about 2G freehand weave cap pass, much appreciated guys.
I got to admit, I ain’t much of a freehand guy but i got in a bind today on some stainless and had to freehand it. It wasn’t my best looking work. I’ll definitely be trying some of these out tomorrow
Point too far forward and can (not always but sometimes) lose depth of penetration and can spread the puddle out wide making it a bit more difficult to control
Hi guys. I been tig welding some carbon pipe on 2G and my cap just looks saggy, i let it cool and then the first 1" or so looks good and then i will sag again, what method would you recomend Thanks
I suck at this my self but I'm guessing not enough filler,to slow and to much heat. Or possibly going to wide with it but I can stick.. working on Tig so just a guess
I had a very similar problem on freehand weaving a 3" sch 40 2G cap, i found that holding a tight arc and keeping the tungsten angle perpendicular to the pipe with a slight up hill push and not spending much time on the bottom just enough to see it wash over the bevel and then back up and add wire at the top. For me this worked well at 115 amps on 3" sch 40 pipe and i would turn it down 5-10 amps at a time when it was getting hot, it is harder with small pipe coupons they get hot quick good luck with it.
Amen brother. Nice job on the spiritual talk. Well said. Goes hand in hand with climbing to the tippy top of any career. Ethics, principles, skill, devotion, persistence, etc..awesome welds guys. U already know that tho lol
Your boy said he doesn't point his tungsten forward. He might want to watch this video. Also kids G40 is a joke ask all the G40s that were let go for the covid bs.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I don’t know what’s better, the welding tutorial,that shows me some good options,The message to help a brother/Sister who might be lost,or struggling with something in their life.I never stop learning, when you think you are so good that nobody can show you anything, you are are already in a bind.Thank You.
glad we could help, you are welcome. Have a blessed day!
These are very useful technologies. Great.👍
Hey Brother, not only are your videos and tutorials just absolutely amazing, I’ve been fortunate to be welding pipe now for about 30 years, and I know every day that I absolutely do not know everything. But the reason why I am writing this is because your faith, and being a Christian I feel is your strongest quality. Every time I get ready to take a test, or make a critical world, I always asked the good Lord to guide my hands , and give me the knowledge and wisdom to make this weld.I try not to brag and boast, because you know when you do that’s when you mess up. I am humbled and grateful for the skills that God is given me. Just want to say thank you I try not to brag and boast, because you know when you do that’s when you mess up. I am humbled and grateful for the skills that God has given me.
Just subbed.Been welding for 30 years and still learning new tricks.Thanks.
your welcome glad we could help
That's the attitude that makes great welders
I honestly believe that this a great school. That shows real world Techniques. Keep them coming
That will help a lot of boiler tube welders who are watching your videos. Please show how he free hand also the other side of the pipe. Thanks for a very helpful videos!
Easy way to weld the other sides.... just swap hands. Works for me!
Awesome lesson. Love your short stories in the middle of each video)
Yall do a great job Teaching and showing people how to do different methods of welding techniques God is great! God bless you for the gift Of knowledge appreciate y’all
SWAT is the major league. Been trying to get on with them for years.
Really aspiring to be this good. Want nothing more than to be the best. Practice and hood time is the only way you’re going to do it. Thanks for the tutorial guys
Slick hand... Love hearing the godly stories..
thank you for your feedback
Good job guys, again. Love your posts, and stories. 👍🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺
Love these videos.... always great and the commentary is excellent.
thank you
This caps looks like a beautiful smaw weld
Nice work yall welds look clean and full of quality. And to work with a company and even better a school where the owner is always around talking with the students working with the team is in my opinion a real open door 🚪 work environment!!
Dammit ol son best videos around
Best and only video I’ve found on this
25 years ago when the pipe was getting too hot i did really freehand, no touching used the electrode welding gloves, wonder if i could still do it, trembling hands now
Thats a nice looking cap on the last one ......hell all of them were pretty sweet, mans got the skill.
Hope he has time to do a video about 2G freehand weave cap pass, much appreciated guys.
That's a sweet machine. I still have not tried the Tig on my Lincoln ranger 250 gxt. Have everything to do it so may try after work today
Great looking Caps, real slick🖒
I got to admit, I ain’t much of a freehand guy but i got in a bind today on some stainless and had to freehand it. It wasn’t my best looking work. I’ll definitely be trying some of these out tomorrow
See you guys next week
Slickest caps fee hand I’ve seen love the channel and the stories lol hope to see more from you ✊respect
respect! thank you.
I love how you put God in your videos. Im we're im at now because of it.
thank you, we are glad we could help out god bless you!
Excelente video maestro saludos cordiales desde puerto Rico
+Luis Lebrón thanks
Very nice! Why do you say you dont ever point your tungsten forward?
Point too far forward and can (not always but sometimes) lose depth of penetration and can spread the puddle out wide making it a bit more difficult to control
Another great tutorial. What advice do you guys have for welders coming off trade school into the field?
God bless you boss
I pray I get this boldness you’ve even to declare the name of Jesus in the welding industry
I love you ❤
You using 1/8" rod?
Nice. Yall are all jam up. Thanks for the videos brothers. God bless
your very welcome glad we could help out!
Can you do a video on welding chrome pipe
+Adrian Barbosa yes
Great video
thank you!
Is this stainless?can these techniques be used on stainless ?sch 40 an sch 10?
Beautiful bead
thank you!
Where is S.W.A.T located at ? And great videos with amazing knowledge thanks for everything.
Nuno Z26 you’ll never get there can’t even sneeze around them boys they find you
Swat is in Gonzales Louisiana. It’s not as hard to get in as everyone says. Just have to know someone to refer you. They only hire referrals.
Nice
Hell ya!
Tig weld from above to down is it fine or not?. I mean if according to code?
So, is the rod 3/16 and the filler is 3/32?
I am guessing the owner was a Hull Tech? Nice
Hi guys.
I been tig welding some carbon pipe on 2G and my cap just looks saggy, i let it cool and then the first 1" or so looks good and then i will sag again, what method would you recomend
Thanks
+PorkChopOda206 we will do a video for you.
I suck at this my self but I'm guessing not enough filler,to slow and to much heat. Or possibly going to wide with it but I can stick.. working on Tig so just a guess
@@WELDorDIE i appreciate it.
Thanks guys 👍🏼👍🏼💯
I had a very similar problem on freehand weaving a 3" sch 40 2G cap, i found that holding a tight arc and keeping the tungsten angle perpendicular to the pipe with a slight up hill push and not spending much time on the bottom just enough to see it wash over the bevel and then back up and add wire at the top.
For me this worked well at 115 amps on 3" sch 40 pipe and i would turn it down 5-10 amps at a time when it was getting hot, it is harder with small pipe coupons they get hot quick good luck with it.
@@MRTYREMULISHA cool, i will try that
Thanks
👍🏾 nice
Dumb question for you pros. Dry TIG rig, I get arc marks, proper way to snap out of a puddle? Pipe and socket- fillet welds
Yes God is real that's y in God we TRUST 👨🏭👩🏭❤📖🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙏one nation under God 💪💪💪💪👍☀️🌏🌎🌍
Subbed
Alabama welding academy: GOD and secondly welding
Amen brother. Nice job on the spiritual talk. Well said. Goes hand in hand with climbing to the tippy top of any career. Ethics, principles, skill, devotion, persistence, etc..awesome welds guys. U already know that tho lol
thank you for your feedback
do you hire ppl from abroad? 111, 141 and 121 weld!
Bravo Zulu.
I owned it was not speeded up bro , we that want to learn don’t mind if the video is longer
thanks for your feedback.
Scotty jones qc to instructor
Fcking owsemmm.. damn son
I believe in the higher power but where the fuck did that come from?
Nice but not free handing at all🤔
1st
Less religion more welding
Beach&BoardFan just say no to religion.
Your boy said he doesn't point his tungsten forward. He might want to watch this video. Also kids G40 is a joke ask all the G40s that were let go for the covid bs.