Good to see the Hoff back doing videos and with the boys. We know he has struggles, and it’s great seeing good people around him still. Keep up the good work everyone
Glad to see y'all and the Hoff back together. I was missing that. I also miss the phone calls to the "special" wrecking yard from back in the early days. Great episode.
Good to see the Hoff back in action, I noticed he uploaded for the first time in ages last week. Hopefully the blokes in a better place now. Cheers lads.
I love crossover episodes. MCM, The Skid Factory and Nugget Garage in one big mashup someday please! Preferably also including Scott and Dave from Haltech. AUD50K build competition. Scott, Dave and Benny help MCM while TFS teams up with NG. Final evaluation contains drifting, circuit racing and drag racing. Three episodes on each channel!
Mate they would have to be in the same shed working side by side. Cause you know the sledging and banter between them would be both next level and equal to or better than the builds!
Cracking video. Great to see Scott again and really chuffed for Timmy, seeing that pleasure and speechlessness must make the end of project that much better 👌😁
Totally understand the 3-hour drive to see a pal and have him tune. I was starting to wonder what was up. I have pals easily 5-6 hours away. Almost never see them more than once or maybe twice a year.
Love a good datto, and I'm keen to find out just how far you can push a VQ. They didn't seem to get much love maybe 5-10 years back, but I suppose they're cheap enough now that development is actually taking place. It's found a good home in that Bluebird though!
What you guys were seeing with the fuel pressure was likely one pump surging (backflowing) thru the other and no, the check valve cannot react fast enough. You shouldn't use 2 pumps with different flow rates in parallel, just like you can't do that with turbos. I imagine he probably had 2 similar pumps previously, as he said "I did just swap the PRIMARY pump out". If you're curious, I have tested 'mixed' pump combos to flow less than a single pump in certain situations. It's smarter to just use an aftermarket check valve if you're running 2+ staged 525lph pumps rather than a 525 and another smaller pump with an integrated check valve.
Nice work on the ol' bluebird.. Also great to see a different car being done up instead of the usual .. Makes my dat rally L20 race motor with twin webers ,seem very slow..
Lots of El-grande 'mang' there. Love it. BTW, have run hall effect on two motors now. Sync loss can be sorted with a pull-up resistor to get rid of interference. Noticeable difference on my latest setup 10k resister did the trick. 12 teeth isn't a lot either. 36-1 is more reliable as I understand.
Be sick to see an in car of Tim doing a kick me out pass at willowbank and losing it like Timmy from south park at the slip shed when he sees the time yelling Datsun!!!! 🤣👍
You guys are welcome to crash at mine in the Redlands and then there is no excuse to not see the Hoff. I’ll even make sure there is Jerky for Alan and black hairdye for woodie
I know it's much newer, but has the Hoff had a play with the 3.3lt Stinger motor? Mine's coming up on 3 years old. No problems, but only the stock 270ish flywheel KW. 450-500 would be interesting...
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Support The Show! www.theskidfactory.com
A guy as happy as Timmy deserves every single one of those horsepowers.
Good to see the Hoff back doing videos and with the boys. We know he has struggles, and it’s great seeing good people around him still. Keep up the good work everyone
The "warning, low power" joke was very under appreciated 😂
Glad to see y'all and the Hoff back together. I was missing that. I also miss the phone calls to the "special" wrecking yard from back in the early days. Great episode.
Is it just me or is the hoff always ultra thrilled about featuring in the videos? Especially when Al is explaining something 😂
I think the Black Dog stalks the Hof 🙁
It’s just you. Scott is an excellent human
@@timheibloem6421 yeah of course he is, top rooster it’s just he looks bored to tears when someone else is talking 😂
Just the down side of alcohol bru!
Good to see the Hoff back in action, I noticed he uploaded for the first time in ages last week. Hopefully the blokes in a better place now. Cheers lads.
Awesome to see the Hoff again.
We need more Hoff on both TSF and a Nugget Garage comeback!
Nice car Timmy.
Both Kai and Scott are awesome. Scott the OG and Kai has a great attitude.
The Hoff is a freaking LEGEND, he needs to start putting more out on his channel 👌
We have all been missing his videos, hopefully he is having his day off he talked about.
He needs a camera man who can film/edit for him. So he can just be The Hoff all day.
Chris did a great job it was a shame he moved on
Thanks
I love crossover episodes. MCM, The Skid Factory and Nugget Garage in one big mashup someday please! Preferably also including Scott and Dave from Haltech. AUD50K build competition. Scott, Dave and Benny help MCM while TFS teams up with NG. Final evaluation contains drifting, circuit racing and drag racing. Three episodes on each channel!
Mate they would have to be in the same shed working side by side. Cause you know the sledging and banter between them would be both next level and equal to or better than the builds!
I could do without mcm.
Fly the Bad Obsession guys over too, please
‘Māori mover’ block 😂😂 - keep him on the show, amazing
Cracking video. Great to see Scott again and really chuffed for Timmy, seeing that pleasure and speechlessness must make the end of project that much better 👌😁
So good to see the boys back together doing what they do best.! Good to see a big smile on Timmy's face too. That thing is friggin impressive. 😲
Just loving more content from you lads. Including the Hoff. Has been very enjoyable. Cheers to everyone involved.
a VQ that doesn't make me wanna rip my ears off.
Thank goodness for Turbos
Turbo VQ is definitely the best sounding VQ
More Timmy content! Good bloke with a great sense of humour
You know its a good day when you hear "Today on the Skid Factory.." Great video!
Sidenote; How glorious is that downpipe?!
'Going home a happy boy ' ! nice one lads. That's one grunty Datsun...
We’re all friends ( with a competitive edge ) 😂 Al hitting the mic at the end sounds like my madinchina diesel heater going full clap 😂😂😂
Wish I had skills like The Hoff and the other lads.
Watching this in between cleaning the cars, bloody blessing waiting 10 minutes between foam and clean off
Totally understand the 3-hour drive to see a pal and have him tune. I was starting to wonder what was up.
I have pals easily 5-6 hours away. Almost never see them more than once or maybe twice a year.
Good to see you back tuning with the Hoff keep coming with the great content boys
The Sovereign segment at 11:20 was gold - made me laugh a lot! Thanks for that - “I do not consent”! 😂😂😂
Timmy is a absolute legend 👍👌
VQ30 is one of the best engine ever. There is a reason Nissan used in their race skylines over the RB.
The hoff is the people’s champion
Love a good datto, and I'm keen to find out just how far you can push a VQ.
They didn't seem to get much love maybe 5-10 years back, but I suppose they're cheap enough now that development is actually taking place.
It's found a good home in that Bluebird though!
Timmy's the best
What you guys were seeing with the fuel pressure was likely one pump surging (backflowing) thru the other and no, the check valve cannot react fast enough. You shouldn't use 2 pumps with different flow rates in parallel, just like you can't do that with turbos. I imagine he probably had 2 similar pumps previously, as he said "I did just swap the PRIMARY pump out".
If you're curious, I have tested 'mixed' pump combos to flow less than a single pump in certain situations. It's smarter to just use an aftermarket check valve if you're running 2+ staged 525lph pumps rather than a 525 and another smaller pump with an integrated check valve.
ill read into this more, thanks for the useful response
Nice work on the ol' bluebird..
Also great to see a different car being done up instead of the usual ..
Makes my dat rally L20 race motor with twin webers ,seem very slow..
Buckle up boys, it's a field trip to the Nugget Garage!!!
Go the Hoff! Yeah on my 3rd VQ car now, factory sleepers.
i❤ the skid factory 😁🇭🇲 Timmy that ride is boss AF hence the plate 😁😁
I used to have an R50 Pathfinder with the VQ35. That was fun rig.
Was probably a VQ40 in an R50.
R50 was VQ35. R51 was VQ40.
@@NearCry91 VQ40 or VK56DE
Unless a VQ got swapped into it aftermarket, the Aussie delivered R50's came with the old VG33... In the US they came with VQ35's.
@@bradmay5796 Early US R50s had a VG33, then the VQ35.
Great to see Hoff in your video again. Hopefully he posts another nugget garage video soon.
Yo Y0 YO montage in the Nugget Garage. Timmy is a funny guy, nice Datto that.
Timmy sounds like a cool bloke👍
There's something extra awesome about a Datsun-based sleeper compared to other sleepers.
Great to see you Hoff!!!
Clean build, very cool seeing something different
Had an m35 stagea with the vq25det back in the day with over 300kw kw at all 4 very under rated engine I gave that thing hell!
i see a very nice ke35 sr coupe. hardly see them anymore even here in nz.
Beautiful build.
Good show. Really interesting seeing big numbers from the v6.
Oh dear lord I love this 910 😍
More Hoff and more Timmy
Lots of El-grande 'mang' there. Love it. BTW, have run hall effect on two motors now. Sync loss can be sorted with a pull-up resistor to get rid of interference. Noticeable difference on my latest setup 10k resister did the trick. 12 teeth isn't a lot either. 36-1 is more reliable as I understand.
Timmy is a pretty cool guy.
Timmy you are a funny fella . very quick great car love it !!!
Be sick to see an in car of Tim doing a kick me out pass at willowbank and losing it like Timmy from south park at the slip shed when he sees the time yelling Datsun!!!! 🤣👍
Awesome video guys! Well done. Awesome collab
You guys are welcome to crash at mine in the Redlands and then there is no excuse to not see the Hoff. I’ll even make sure there is Jerky for Alan and black hairdye for woodie
Looks like that birds flyin right. Thanx
Great video. Like others have mentioned, like the crossover. Speaking of which, an update on Kevin?
Cheers lads for the content.
What a great car. I love it.
Māori mover van! Hahahahaha I didn’t miss that!!
Nicely done good time's
Thats cool for a v6 I'd be happy too.
Beauty and the beast
How good was the full intro song again. ❤❤❤
Datto's!!!!! ❤
Ive always wanted to stick a rover 3500 v8 in one of those bluebirds
Yeh i love a 910
What's the altered in the back ground at 14.05
Good to see the communal pommie shower.
What was tbe benefit of using the vq30 heads over the vq35 heads aswell
I know it's much newer, but has the Hoff had a play with the 3.3lt Stinger motor? Mine's coming up on 3 years old. No problems, but only the stock 270ish flywheel KW.
450-500 would be interesting...
Love this car. 🔥
going 9.0 in that thing is gonna be knarly
Purple bananas
Turbo yoda and stuff … 😎👌🏻
I learned how to drive in a blue budgie.
lovely
@14:50 - I had always assumed Al was more of a Lynx Africa kinda guy.
Did some pepto-bismol diff fluid leak out at 15:41?
I have a 5.4L 3 valve that I'd love for you guys to get your hands on but alas, I don't live in Drop Bear territory.
very keen to get my own g40!
Corn fed boost 🤘🏻
Holy shit I didn’t realise Cleveland dyno was at raby bay. No wonder you guys go to Kai now.
Where is Kevin the 2Jz commy?
tuff car
Everytime I hear the cameraman talk I feel like I'm watching an episode of Mike Nolan. 😂
as a 910 ownder I'd like to know the diff, trailing arm setup in this car.
Reinforced pickup points, factory trailing arms and hilux diff.
Does timmy do cashies wiring up. Need my elite2500 piggybacked to my jzs161.
Hi 👋 from Kazakhstan
Why you didn't show us the process of building this car😔
Because they didn’t build it. They showed you the big they did. Upgrading the turbo setup. It was a few videos ago.
Hoff
I'm looking at buying another ke70 and was tossing up either 2j or a barra... from seeing the nugget garage edition what would blokes suggest?
A8 Rb30 turbo 🤣👌👌👌
I thought you were building a rb30 did you cancel that build ?
We are building a 2jz commodore race car. No RB30s.
nice as always, but every time I see a non-filtered turbo intake it stresses me out
The Hoff must feel like the nicest guy in prison when the Skid Factory boys come over
Who else was waiting for Al to bust out mad beats on the Mic check....?
Not going to lie. Now searching Gumtree for Blue Bird at the minute.
looks like an old ford cortina my dad drove
Why do a vq35 with vq30 heads?
Because it was a VQ30 beforehand and all the manifolding is for VQ30.
How good 🤙, do you guys ever run borgwarner stuff or only Garrett?
Al knows as much as anyone around him.
So at what point does TSF buy their own dyno & tune in-house?