2024 GBA SP Gameboy Advance SP IPS 3.0 Laminated Mod Tuturial
HTML-код
- Опубликовано: 4 авг 2024
- Gamers,
In this video, I will be demonstrating how to complete the Gameboy Advance SP Laminated IPS screen mod! It uses all the latest and greatest techniques in the practice. We will takle this overwhelming task with patience and ease. Enjoy!
Any questions? Feel free to joint my discord server! / discord
Want a build but dont want to build it yourself! I have you covered at pizzahandhelds.com
See ya there!
Pizza
****************************************************
Mods used in this video:
10% OFF - Funnyplaying IPS 3.0 Laminated Screen Kit:
handheldlegend.com/pizzahandh...
10% OFF - Funnyplaying Screen Kit Mirror Shell:
handheldlegend.com/pizzahandh...
10% OFF - Funnyplaying Buttons
handheldlegend.com/pizzahandh...
10% OFF - Funnyplaying Membranes
handheldlegend.com/pizzahandh...
10% OFF - Retroglow Button LED Kit
handheldlegend.com/pizzahandh...
****************************************************
Recommended Soldering Equipment:
10% OFF - Pinecil Soldering Iron: handheldlegend.com/pizzahandh...
10% OFF - Pinecil Soldering Iron Tips: handheldlegend.com/pizzahandh...
10% OFF - Pinecil Silicone heat resistant USBC Cable: handheldlegend.com/pizzahandh...
10% OFF - handheldlegend.com/pizzahandh...
10% OFF - Brass Wire Solder Iron Cleaner: handheldlegend.com/pizzahandh...
10% OFF - Solder: handheldlegend.com/pizzahandh...
10% OFF - Solder Flux: handheldlegend.com/pizzahandh...
iFixit Mako Everybit Driver Kit: amzn.to/3MZtg7o
****************************************************
Save $$$ on Retro Console Modding Supplies:
10% OFF - ExtremeRate Gaming Mod Supplies: extremerate.com?sca_ref=3798758.sEpKUgjCu3
10% OFF - HandheldLegends Gameboy Mod Supplies: handheldlegend.com/pizzahandhelds
Purchase Completed Modded Gameboy Consoles made here on the channel here: www.etsy.com/shop/pizzahandhelds
****************************************************
Timestamps
0:00 Intro
0:38 Parts Needed
1:11 Diassembly
1:02 Removing Hinges
3:23 Cleaning Power Switch
3:38 Modding Begins
4:50 Hinge Cover Exchange
5:16 Inserting the Hinges
6:09 Screen Installation
8:18 Button Installation
8:38 Soldering Wire
9:21 Ribbon Cable Assembly
9:57 Button Insertion
10:32 Volume Slider Cover
10:50 L and R Button Assembly
11:40 Shell Reassembly
12:56 Screw Cover Assembly
14:01 Finishing Touches
14:22 Troubleshooting and Common Problems
15:03 Button LED Mod
15:20 USBC Mod
16:48 We did it! / Outro
****************************************************
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Pizza Handhelds. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
****************************************************
FOLLOW me on my other social media accounts:
Instagram:
/ pizzahandhe. .
Twitter:
/ pizzahandhelds
TikTok:
/ pizzahandhelds
-Dan 
Развлечения
Been watching a bunch of these gbasp mod videos, this is a very good one, thanks!
That’s what I try to do w my videos!! Thanks!!
Probably the best mod video I’ve seen, you made me more confident towards building my own :)) thank you!
Thanks! Saw others and thought I could make one better as usually a lot of details are left out :b
Yo thanks i finally i found the rest of the present because of ty.
Think you my gameboy looks clean 😊
Thanks for this great video!
thank you very much!
Thanks for watching everyone? How did your GBA SP build turn out? What kit did you use? Tag me on some Instagram pictures!! Have a great day!
buying one asap on Etsy!
Great stuff. Will be doing the usb-c mod for the first time soon. Nervous 😬
Careful! Go slow and don’t force anything esp when Desoldering. Impatience is where u screw things up. Good luck!
This looks breathtaking!!
its really a struggle to live in an economically sanctioned country and not being able to buy this. I've always loved the GBA/GBC Pokemon games much more than newer ones and I've only played them on Emulators.
Out of curiosity how much would this all cost? assuming you dont have a GBASP?
On that beautiful clear red sp the button colors are the classic grey or do you have the link for them by any chance thanks?
My IPS screen is coming in 2 days I’ve never soldered anything so I’m a bit nervous
How'd it go?
@@Asfgxff it went good ! I was a nervous when it came down to soldering but in the end I got it and everything worked good the IPS is a major game changer , I carry it around everywhere now it’s part of my edc
This isn't my first time modding a console and this video was very helpful, but my screen keeps changing the brightness level randomly by itself... I've desoldered the wire and made sure there's no bridging on the board, but the issue persists (brightness changes in random intervals). My soldering seems fine and the brightness button does work, so I've contacted FunnyPlaying's support to return the IPS kit because I'm pretty sure I received a faulty unit... I'm also applying to return their cheap transparent shell that broke off on the right hinge after literally a handful of times opening and closing the GBA. I feel like I got ripped off 🙂
I'm thinking about getting into gameboy sp modding... A couple questions as a complete beginner
1) how difficult is the screen replacement and what kit would you recommend buying?
2) if you replace the screen, do you have to replace the shell too? Or is that optional
Funnyplaying kit and shell ez it’s so nice!! If u follow my video I’m sure u can do it. Yes it’s highly recommended u use a funnyplaying shell with the screen kit. Glhf!
Nice Video cant say anything bad.
But one thing i would add is replace the charging Port with a usb c kit so it can charged everywhere.
Usbc is nice I touch on it towards the end of the video. Will be an upcoming video :) thanks for the compliment
Where to buy those LED backlight ok buttons? Thanks
Bruh. you need a lot more subs. your videos are top notch. I like how you progressively got better at soldering. What battery upgrade can you recommend for the SP?
That’sv nice of you thank you!! Yeah def getting better at soldering. Gonna do some full board replacement videos here soon - like the Gameboy color pocket if you have ever heard. But ya Funny playing has a new battery that’s drop in. It’s essentially a mahko battery with fixture already attached: funnyplaying.com/products/gba-sp-rechargeable-950mah-lipo-maxplay-battery-mod
In my experience modding gbasp the original charger plugs All have issues by now. So instead of going though the trouble of replacing it with an original plug. $7 to upgrade to usbc isn’t bad. Cuz on the real, who doesn’t have a usbc charger at home??
Nice build!
Can you implement the LED mod and still have access to the Q12B? (Or are you limited to the touch screen adjustments then)
The LED mod has thru holes meaning u can solder the wire over the top of the flex pcb! the fp kit doesn’t have a touch sensor unfortunately. You need to solder the wire to get OSD functions. Good luck!
Could this be done on an oem shell?
how many mah drains that kit in mid level?
I have this white square on my screen don't know where it goes
Do you plan on doing a video on the USB C installation when you master it?
Ye! For sure!
Install both boards into their shells before doing any soldering. You'll have an easier time.
Do you know if one is not planning on switching out the original shell, is there any sort of modification needed to make on the top shell?
Ask question again not sure what you mean
@@PizzaHandhelds He never asked again, but what he meant was: If someone doesn't want to use a new shell from funnyplaying, i.e. they want to use the original shell. Would the original require any adjustments, cutting, different pieces added on, etc... in order for the new screen to work for it.
This is just what I'm guessing lol.
Hello!
About to mod my GBA SP but I fell in love with that Ruby Red shell on 13:43
Where can I get that exact same one?
Yeah they are stellar! See link here: handheldlegend.com/products/gbasp-custom-mirror-shell-funnyplaying?variant=40122129023110
PIZZAHANDHELDS FOR 10% Off :)
This video has been out a while but I’m hoping you could help me out. Other videos didn’t mention needing the wire but my SP wouldn’t turn on without it. Soldered that in and It turns on now but the screen is just fully black. Any ideas what’s going on?
sounds like the ribbon cable isnt seated properly with on the ribbon cable to board connection or the screen to ribbon cable connection. Connecting the wire will not affect the screen functionality. GLHF!
@@PizzaHandhelds so weird, when I tested it without the wire I had zero response at all from either the screen or the device. I’ll try the cables again. I’m thinking the shell might be compressing the ribbons
How you liking these mirror sp shell from Funnyplaying?
love them! GOAT shells as far as im concerned. Made about 10 of them or so.
i want it
I’m having that problem you described with the power flickering on and off real quick. The orange charge light will turn on but the system won’t. Any suggestions?
The charging light also eventually turns off while it is still plugged in after 5 mins or so. Thank you for the help
@@StickMan7575 1 - clean power switch. If that doesnt work replace the fuses F1 and F2. If that doesnt work then look for corrosion or damage to the mobo. GLHF!
Thank you! Working on it tonight hopefully these do the trick! Your video was super helpful! Thank you again!!
@@StickMan7575 hit up the discord if ur needing more help my dude
Hey would you do services on a personal SP?
Sure - please message me on Instagram instagram.com/pizzahandhelds?igshid=NGVhN2U2NjQ0Yg==
@@PizzaHandhelds hey I don’t have IG is there a different way to contact you?
@@PizzaHandhelds hey I’ll message you on Etsy
They didn't send me near as many screws??
U should have the amount of screws you need. If not contact wherever you bought the kit from :D
@@PizzaHandhelds I bought it direct from funny playing lol
@@emmetthenry1373 go to their site and click contact them and fill out the form. Rip cuz shipping takes forever. Why it’s sometimes better to buy domestic from HHL or something. Sorry bro that sucks! Good luck!
That case is too clear imo, i prefer the clears that look like the old n64 colors
I'd rather just get an emulator device that has a back lit screen
Nobody ever upgrades the battery, changes caps, add amp, uses power clean, usb c or give it metal buttons all in one vid... just a screen and shell, wow how unique 😅
That’s a lotta mods on a single console. Personally would ever consider caps, usbc, and battery. Metal buttons, amps and cleaners are overrated / don’t do much.
This is a screen mod video tutorial what do you expect
I ended up getting plastic buttons for now, but I will eventually get the metal buttons.
I like the plastic better than metal myself.