I'm worried about the video around 2:37 in relation to page 56 Step 2. The video shows replacing the toothpick in the cog assembly (pages 46-49) with a metal axle. But the instruction manual shows the axle going through holes on the main frame just above this assembly. I followed the video and am an axle short! I tried putting a toothpick back in the cog assembly but the hole has been widened by the axle so it is loose. The video by Dragonfly Puzzles seems to follow the manual.
Hello, I love the colors and I'm trying to do as well but I don't find the real oil of dry Aloe vera ! Please have you a link to see the sort of real oil you use ? I've tryed a product of NUXE 7 oils but I don't really see a difference with wax and a meticoulus sanding. Thanks for all, Phil (BE) P.S. : where can I find the "glasses" of plastic with deco Ukrainian ? P.P.S. : I find no response on the facebook Ugears team... P.P.P.S :Congratulations and thanks for all
Amazing Azai! I love the way you got that metallic finish... very metallic looking, it separates out the gears from the rest which is what I'd like to do. What product did you use if I may ask?
I really enjoy this video and I try to follow and replicate it. I am on my second try and continue to have the small issue, failure of the timing mechanism. I am confident my lower power is running properly but it doesn’t translate to running. Here are my 2 questions: 1.). I see you using various lubricants can you describe what you are using. 2.) When i load the timing spring with the holding arms in the position you show my spring tilts downward preventing good spring. The only solution I’ve found is to rotate the upper holding arm around to the rear of model opposite the locked arm controlling the pin. I also know the pin is in the right position and works smoothly however I don’t have enough spring to continue the pendulum. My timing is short - is there any solution
Loved the video and it solved my problem. Thank you so much. But I have another question. The hour reel will only advance to the half hour at 00. Do you know anything about that?
Hello. I liked the video. I'm about to start assembling my table clock. Can you advise me something regarding the assembly, I want to reduce the chances of doing something wrong. And further. What lubricant do you use for the parts in this video?
I've mentioned eight suggestions in the Ugears Fan Club community on facebook, you can join the discussion and share pictures together to make sure the model work well. Or you give me the contact information, I can tell you the details.
Forget the fancy Aloe oil. It is just soybean oil with vitamins. Use PTFE emulsion or clear silicone oil.
I'm worried about the video around 2:37 in relation to page 56 Step 2. The video shows replacing the toothpick in the cog assembly (pages 46-49) with a metal axle.
But the instruction manual shows the axle going through holes on the main frame just above this assembly. I followed the video and am an axle short! I tried putting a toothpick
back in the cog assembly but the hole has been widened by the axle so it is loose. The video by Dragonfly Puzzles seems to follow the manual.
Hello, I love the colors and I'm trying to do as well but I don't find the real oil of dry Aloe vera ! Please have you a link to see the sort of real oil you use ? I've tryed a product of NUXE 7 oils but I don't really see a difference with wax and a meticoulus sanding. Thanks for all, Phil (BE) P.S. : where can I find the "glasses" of plastic with deco Ukrainian ? P.P.S. : I find no response on the facebook Ugears team... P.P.P.S :Congratulations and thanks for all
Amazing Azai! I love the way you got that metallic finish... very metallic looking, it separates out the gears from the rest which is what I'd like to do. What product did you use if I may ask?
I used two way to paint the blue bracket . Water-based markers first, and then cover a very thin coat of spray can which present silver luster.
I really enjoy this video and I try to follow and replicate it. I am on my second try and continue to have the small issue, failure of the timing mechanism. I am confident my lower power is running properly but it doesn’t translate to running.
Here are my 2 questions:
1.). I see you using various lubricants can you describe what you are using.
2.) When i load the timing spring with the holding arms in the position you show my spring tilts downward preventing good spring. The only solution I’ve found is to rotate the upper holding arm around to the rear of model opposite the locked arm controlling the pin. I also know the pin is in the right position and works smoothly however I don’t have enough spring to continue the pendulum. My timing is short - is there any solution
j'adore
What is the oil?
Aloevera
Hi. What ist oil?, please.
Loved the video and it solved my problem. Thank you so much.
But I have another question. The hour reel will only advance to the half hour at 00. Do you know anything about that?
Join the fan club, everyone here would glad to help you ! facebook.com/groups/ugearsfanclub/?ref=share
maybe the tongue (#5) of the wheel is too long.
Hello. I liked the video. I'm about to start assembling my table clock. Can you advise me something regarding the assembly, I want to reduce the chances of doing something wrong. And further. What lubricant do you use for the parts in this video?
I've mentioned eight suggestions in the Ugears Fan Club community on facebook, you can join the discussion and share pictures together to make sure the model work well. Or you give me the contact information, I can tell you the details.
facebook.com/groups/ugearsfanclub/?ref=share
@@saintyah1 Ok, thank you! I will join the fun club.
你用的是什麽蠟?在室溫下還能保持液態狀??
😊