Installing Our Paint Booths
HTML-код
- Опубликовано: 4 авг 2024
- Did you know that our paint booths are designed to be self-installed? The end-user can save thousands on a professional installer if they opt to install their own booth. Visit www.paint-booths.com for more information.
Installing one of our Paint Booths will take you a couple days -- but let us assure you it is easier than you think. To prove it, we've installed a booth and filmed it for you to watch. If you have the right tools, someone to help you and the ability to use a drill and a measuring tape, you can do it! If you get stuck, you can always give us a call and we'll walk you through it. VISIT www.paint-booths.com for more information. Авто/Мото
I can only dream of a spray booth.
Awesome video... Now I can see how to make my own....
For the ETL enclosed finishing booth, should the side walls be butt up against the plenum wall or the side of it? Thanks
Nice to see the process, finally someone did it! Thank you! Question... is it not necessary to use gaskets or seals between panels and between panels and floor to prevent dust being sucked in? Thank you.
We actually do send caulk to seal the floor and the seams at the panels. We send a door sweep and a foam door seal. Thanks for the comment!
We are caulking between everything, and plan to caulk inside after it's all together for good measure.
i installed this kind spray booth before but this spray booth look short to me the ones i did had 3 lights on top and the walls and this spray booth is kinda middle grade spray booth with no heat . most spray booths i installed was Accudrarft spray booths
So I see you left an important tool out C -clamps you need to add that to the beginning of the video.
How much is the whole booth?
Nice
Do we get a copy of those Groovy Tunes.
Thanks! We were rocking out to something ROCK while doing it!
How do you put the huge fan on the roof of the paint booth?
Two of the guys lifted it onto the ceiling.
@@StandardTools what size both is this ?? W x L , not worried about H.. thank u
@@keithwesley9880 Great question. This was our SD-1000 and the dimensions for that booth are 14' W x 9' H x 26'5" L
We are going to Install one tomorrow,
Our customer has 3 units ( same kind as on the video ) the only thing we are going to add are receptacles close to the lights ,changing out the ballasts sucks,LED fixtures would better.
We do offer LED Flat panels. They are super easy.
We got the LED option for the same reason. Plus, less electrical drain.
Con extractores axiales se puede hacer una cabina .. acaso no se necesitan centrífugos.. ?? Necesito que me instrullan
depende del volumen de aire a extraer y la caída de presión (la caída de presión dependerá de las etapas de filtración que tengas instaladas, también la caída de presión de tu ducteria y accesorios que tengas en tu sistema de extracción). Para extractores axiales tienes la limitante de la caída de presión que pueden vencer, en cambio un centrifugo te puede vencer caídas de presión bastante altas. cada uno tiene sus ventajas y desventajas.
What’s the price for this exact booth or can you leave a link to this exact paint booth?
This is our Semi-Down Draft Paint Booth. Awesome Booth!
www.paint-booths.com/category/side-downdraft-paint-booths.html
@@StandardTools all thats spray booth is not good alot garbage when you put clear...the best spraybooth is downdraft but in de floor
Saw a similar one on aliexpress for $4k
Dude send out the tabs for the music.lol
Another Dolphin's Fan :)
they want 12-16k for this flimsy metal building.....
Do you have one of our booths? I'm guessing you don't because our booths are not at all flimsy. So, you must be referring to the fact that our booths are installed using TEK Screws, which were designed for metal buildings ... it's an easier install, a tighter grip and a tight hold. We invite you to come see our booths... you can even shake it and it won't fall down!
My booth just shipped today. 4,600 lbs. it’s extremely durable lol. More to a booth than sheet metal.
David, try to search only for an extractor fan for a paint booth. I just did it now: price for 11 500 cfm is +5k usd. In this case the 9.5K usd price for a basic booth with a fan extractor of 12 750 cfm is not so big! Give a google and see for yourself.
We are putting ours together right now. Half assembled, and it's sturdy as hell.
@@XxShantilisxX -Building ours tmw but these directions suck. Have you done this before or did you have other instructions besides the one included?