I used the EZ Mod kit with the Panthera (designed by Jasen Hicks). Not exactly the same, but it should be similar. I completely screwed up those little USB wires, so I took the whole 5 pin connector out. I installed the Aviator to USB connector kit from Arcade Shock and connected the USB end to the USB port on the Brook Universal Fighting Board. That worked fine and I didn't need to deal with messing up stripping tiny wires. Arcade Shock sells a similar USB-C connector kit. I'm guessing that one would work the same.
Yes there is a spot for the upgrade board to be mounted on. The cable is not included in our kit but should be included we the upgrade board. We include the screw as well for mounting.
I switched the red and green wire in my Panthera so I could use te2 cables instead of the Razer one. If I get the pasta board could I swap the green and red cables to be able to use the te2 cable instead of the Razer one? Anyone know or have any advice?
@@donapc7357 We do have that happen sometimes where a customer asks a question about compatibility after ordering the product. ^_^;; If it hasn't shipped yet, please reach out to orders@focusattack.com
In the video description we mention that the device allows installation of Brook's Universal Fighting Board among other PCBs with similar form factor and pinouts. The UFB works with Xbox, Playstation and other consoles. The PASTA is not an Xbox to PS converter.
I totally messed up trying to strip those thin USB wires. So I ended up removing the entire USB connector and installing the Arcade Shock Aviator to USB connector kit instead. I just plugged the USB connection from the connector kit directly into the Brook Universal Fighting Board.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
This is super cool. I hope there will be a model for hori's fighting edge, as that PCB is rather slow but the stick is one of my favorites.
and how is this going to work with the hitbox mod for the razer panthera?
Is there a way to replace the cable? I want to be able to use a USB-C instead of the proprietary 5 pin.
I used the EZ Mod kit with the Panthera (designed by Jasen Hicks). Not exactly the same, but it should be similar. I completely screwed up those little USB wires, so I took the whole 5 pin connector out. I installed the Aviator to USB connector kit from Arcade Shock and connected the USB end to the USB port on the Brook Universal Fighting Board. That worked fine and I didn't need to deal with messing up stripping tiny wires. Arcade Shock sells a similar USB-C connector kit. I'm guessing that one would work the same.
Are they ever coming back in stock? or are they gone forever, the link in the description is gone 😞
Same for EZ mod...
Will the PS5 brooks upgrade board work with this?
Likely, the upgrade board connects to the UFB, which then connects to the PASTA board.
Yes there is a spot for the upgrade board to be mounted on. The cable is not included in our kit but should be included we the upgrade board. We include the screw as well for mounting.
I needed this video thank you 😊
Ez mod is bettee than pasta?
I upgrade mines using the easy mod PCP works like a champ
I switched the red and green wire in my Panthera so I could use te2 cables instead of the Razer one. If I get the pasta board could I swap the green and red cables to be able to use the te2 cable instead of the Razer one? Anyone know or have any advice?
Any chance of getting these in soon I'd like to purchase one
We're working to get more units in the next two weeks. BBG had a run on inventory so we're waiting for the shipment.
@@focusattackcom thanks so much
So I don't really get what half of the pro's to using it are, just that it'll allow you to use it on different platforms 😅
Would this work with the razer attrox? Or is the internals noticably different?
Unfortunately the internals are different. I used this pic as a reference and have confirmed it is NOT compatible. imgur.com/gallery/ttrJrCE
Does this work with the atrox if I get a universal fight board?
It's designed specifically for the Razer Panthera - sorry!
@@focusattackcom that suck because I ended up ordering it 🤦🏾♂️
@@donapc7357 We do have that happen sometimes where a customer asks a question about compatibility after ordering the product. ^_^;; If it hasn't shipped yet, please reach out to orders@focusattack.com
So this is for xbox to ps users only?
In the video description we mention that the device allows installation of Brook's Universal Fighting Board among other PCBs with similar form factor and pinouts. The UFB works with Xbox, Playstation and other consoles. The PASTA is not an Xbox to PS converter.
I want EZ Mod for Razer Panthera / pico fighting board
Sorry I was hoping for actual pasta
Narrator sounds like someone who has the the Mission Impossible 64 world record speed run
never understood why they used THE THINNEST wires for the usb connector....
I know right? It's my biggest complaint with OEM sticks.
@@bitbanggaming204 yea dude, it's razor thin, really really annoying when putting those wires into the terminals
I totally messed up trying to strip those thin USB wires. So I ended up removing the entire USB connector and installing the Arcade Shock Aviator to USB connector kit instead. I just plugged the USB connection from the connector kit directly into the Brook Universal Fighting Board.