just did this mod last weekend. this video helped a lot. you DEFINITELY need a dremel tool if possible. I used a handheld jigsaw. it worked ok. only notes I have are to be extra careful when screwing the plastic panel down. I was careful and still cracked the corner a bit. no big deal, it was my first time adding art work, so I def won't make that mistake again. Love the kit and vid, thanks again! :)
You can't unfortunately. The EVO requires creating a whole new plastic top, and there isn't enough space for the stickless layout. Please see here. imgur.com/a/mhSxEY7
Does this works with other buttons? (Not Sanwa) Also if i order this kit, do i need to add everything at the optional tabs? First time doing something like this
Will this still work on PS5 games like the normal Panthera? I have hitbox and a Panthera and trying to decide if it's better to mod my Panthera to a hitbox layout or to mod my hitbox with a board that can work on PS5 games
After finishing the conversion last night, the latch on my panthera is a bit finicky. It seems to require more force to close. Perhaps i over tightened or didnt align things properly. Does anybody have any suggestions? I dont know how much work i have to undo just to fix it. 😢
I'm afraid not. Panthera and Atrox use different screw mechanisms to hold the plexi. We do offer an option to remove the control panel when requesting a print or plexi.
@@focusattackcom Hmm, is it just because you don't have a all button template for the Atrox, or does the all button steel plate in this video not fit the Atrox case?
@@Reyas We don't have an all button version for Atrox. That is partly due to lack of general demand for Atrox vs Panthera , which makes it more difficult to support with its own stickless panel. We may offer it in the future if we can get it in smaller batches.
@@Reyas we cut the plexi panels in house, but you need a metal panel underneath the plexi to support the buttons. That is sourced from AFS, who has their own MOQs to accommodate the request.
thats ground breaking!!!! Sadly i would only do this if i were to have my hands on gamer finger buttons... (which are impossible to get outside of japan)
@@focusattackcom when is the expected release of the pass through? i checked the connection of the hori pass through and the 5 pin on the main board it seems it can fit tho
Concise and very easy to follow as I ran into no issues installing the stickless panel on my Panthera.
just did this mod last weekend. this video helped a lot. you DEFINITELY need a dremel tool if possible. I used a handheld jigsaw. it worked ok. only notes I have are to be extra careful when screwing the plastic panel down. I was careful and still cracked the corner a bit. no big deal, it was my first time adding art work, so I def won't make that mistake again. Love the kit and vid, thanks again! :)
Can I add a universal brook board and the pasta to this to keep my ps functions while making it a hit box
the SO.CD cleaner already comes in the kit right? or do i need to ad an additional one in the options?
Please!
Hello, how would it be to turn on this magician cleam V2, on the Razer atrox for xbox? Can you help me
Is there by any chance a way to make this Stickless Conversion Kit works in a atrox box?
Would you make WASD stick less with razer atrox Xbox one ?
Do you guys have one for the evo version of this stick
You can't unfortunately. The EVO requires creating a whole new plastic top, and there isn't enough space for the stickless layout. Please see here. imgur.com/a/mhSxEY7
Does this works with other buttons? (Not Sanwa)
Also if i order this kit, do i need to add everything at the optional tabs? First time doing something like this
where do you connect the other end of the so.cd's power cable?
i hop to make extended vewlix kit for panthera
Will this still work on PS5 games like the normal Panthera? I have hitbox and a Panthera and trying to decide if it's better to mod my Panthera to a hitbox layout or to mod my hitbox with a board that can work on PS5 games
After finishing the conversion last night, the latch on my panthera is a bit finicky. It seems to require more force to close. Perhaps i over tightened or didnt align things properly. Does anybody have any suggestions? I dont know how much work i have to undo just to fix it. 😢
Will this work on the Atrox, and is there an option to have no control panel on the artwork and plexi?
I'm afraid not. Panthera and Atrox use different screw mechanisms to hold the plexi. We do offer an option to remove the control panel when requesting a print or plexi.
@@focusattackcom Hmm, is it just because you don't have a all button template for the Atrox, or does the all button steel plate in this video not fit the Atrox case?
@@Reyas We don't have an all button version for Atrox. That is partly due to lack of general demand for Atrox vs Panthera
, which makes it more difficult to support with its own stickless panel. We may offer it in the future if we can get it in smaller batches.
@@focusattackcom That's fair enough. I wasn't sure if you sourced your plexi panels or cut them in house.
@@Reyas we cut the plexi panels in house, but you need a metal panel underneath the plexi to support the buttons. That is sourced from AFS, who has their own MOQs to accommodate the request.
I wouldn’t dare to touch my Panthera, I just love that thing too much! But would love this but for the Panthera Evo!
Do you still sell the kit? Or at least the top panel?
The kit will be restocked. Just waiting on supplies from AFS
@@jaleelbeck168 hope so! Thanks for the info
Does this work for the mad catz te2+? Been going crazy with research but haven't found any answers
thats ground breaking!!!! Sadly i would only do this if i were to have my hands on gamer finger buttons... (which are impossible to get outside of japan)
great minds - I have this kit and GF buttons coming. You can get the buttons here:
akecon.games/en/collections/pushbutton?page=3
@@DJ_Neuro Big help! Thanks man
how do i install the board on my qanba carbon the main board lacks extra 5v connector
It may not be possible to install the SO.CD into the Carbon, though need to check if the (upcoming) Obsidian passthrough may work in that model.
@@focusattackcom when is the expected release of the pass through? i checked the connection of the hori pass through and the 5 pin on the main board it seems it can fit tho
It would be cool if this were some how hot swappable.
Very odd that the art/plexiglass is glued on a Panthera but not an Atrox.