The touch-sensitive river table offers a captivating and interactive experience for users.
HTML-код
- Опубликовано: 22 авг 2024
- A touch-sensitive river table is a unique and innovative piece of furniture that combines the natural beauty of a river-like resin feature with touch-sensitive technology. It is a table that reacts and responds to touch, creating interactive and visually captivating experiences.
The touch-sensitive river table typically consists of a wooden tabletop with a river-like groove or void filled with transparent epoxy resin. The resin is often dyed to resemble flowing water, and it may contain embedded elements such as pebbles, shells, or colorful pigments to enhance the aesthetic appeal.
The touch-sensitive aspect is achieved by incorporating touch-sensitive sensors or capacitive touch technology into the table's design. These sensors can detect human touch or proximity, allowing the table to respond to different touch gestures or movements. For example, gentle touches or swipes along the table's surface can trigger lighting effects, color changes, or even interactive patterns within the resin river feature.
The touch-sensitive river table offers a captivating and interactive experience for users, creating a sense of connection and engagement with the furniture piece. It can serve as a conversation starter, an artful centerpiece, or a functional surface for various purposes.
Please note that while touch-sensitive river tables are an emerging trend, they are still relatively specialized and may require custom craftsmanship or specialized expertise to create.
Sensor Name TTP223, with a Copper Ring soldered to the sensor
This not is ttp223
@@RafaPulgar então qual é o nome? Sabichão
@@RafaPulgar In essence, it is a TTP223 sensor with the addition of a transistor output as a driver for an LED strip, as the TTP223 IC cannot directly power an LED strip. It also integrates a fade-out effect (by adding a capacitor). You can find similar modules by searching for: 12V LED Touch switch module TTP223
@@JoaoPedro-pi1oo one of the variations
www.aliexpress.com/item/1005005628355731.html?spm=a2g0o.order_list.0.0.23455c5fzrAeof&gps-id=pcOrderListRecommend&scm=1007.38956.333894.0&scm_id=1007.38956.333894.0&scm-url=1007.38956.333894.0&pvid=9dd34a64-3d85-4bce-9881-ee48e629b398&_t=gps-id%3ApcOrderListRecommend%2Cscm-url%3A1007.38956.333894.0%2Cpvid%3A9dd34a64-3d85-4bce-9881-ee48e629b398%2Ctpp_buckets%3A668%232846%238108%231977&pdp_npi=3%40dis%21EUR%214.63%212.31%21%21%21%21%21%40211b444516856866632318422ebf1f%2112000033804994937%21rec%21DE%214627457929
Where I can buy same this TTp sensor please
😍✨👌 This is absolutely beautiful. A work of art, technology, and function. And a labour of love too! You put so much work into it 😅 thankyou for making this video, I really enjoyed it 😊
What is the thickness of board?
I want one request from you. My name is Abdo and I watch your videos from Morocco. I want you to explain to me how you put the threads and the sensors together. Thank you from the heart, my brother.

The exact LED touch sensor driver he uses in the video seems to be custom ordered. But using a modified TTP223 would achieve a similar effect.
Exactly that's what I'm working on now
how to modify the ttp223?
i have been playing around with the ttp223 and capacitor to act as the fade off of the led but for a reason i can't explain, it fade on the led instead of fading off the led. when i run it with a simple push button, its all good and work exactly like i want but when i take the push button out and put the ttp223 to its place, it reverse the fade and i can't get it to work at all. the ttp223 is fine and work perfectly too caus if i take the capacitor out, it work just like the push button. So now i'm realy curious, what type of modification are you talking here ?
@@woodworking990Were you able to get it working? If so what did you use?
I think the sensor is "Touch sensitive TTP223" and detects from a distance of about 0.5 cm. But I think they are connecting cables to increase this range. Because I saw in a video that the cable was connected to this sensor afterwards. There is a channel on RUclips that does this and explains it in three videos.
Channel: Axes: WoodWork
Yeah but bout the wiring tutorial still missing some. I'm still searching how to wiring the TTP223 sensor with the LED strips, ring a bell sir? Any help will be appreciated.
@@lesliekho8970 Hi I also want to know about this can you help me?
@@lesliekho8970 You would connect the +5V of the LED strips to the "SIG" or "I/O" port on the TTP223 board. and the ground to the same ground
@@Ak-47_Target_You I'm still newbie and doubt that I can help you much bout wiring, sir.. The table draw my attentions and want to learn more.
@@ZipZash does it need capacitor for each sensor for wiring LED strip?? I watched some videos about sensor TTP223 and did mention it. Correct me if I'm wrong. TIA
HELLO, EXCELLENT JOB; COULD YOU SHARE THE SCHEMATIC DIAGRAM AND THE ELECTRONIC ELEMENTS PLEASE..
I have some questions :
1. Can it be programmed to change color automatically?
2. Can the idle mode be programmed, the lights turn on by themselves
3. Can you use the remote to change the color of the lights
Yes it's possible I guess
yes, with neopixel led
No, it has no program and those are only white leds. The chip literally just detects objects turns the light on and then dims it off when it doesn't see an object, there is no code, no controller and no program. If you wanted to do what you're talking about you'd be looking at a full re-engineer of all the electronic parts. Your idea would require a master controller and a robust communication bus that could communicate with every single module telling it what color to turn on etc.
Hello, can you share the CNC files?
Can you please post a link to the sensors you use?
Нашел?
Would the sensors still work if it was your foot getting close to it? Also will it work through plastic and socks? One last thing, can the sensors work with Arduino instead of directly being attached to LEDs?
where did you buy the circuit board?
Hello, congratulations for the project. looks great. do you have a link or name etc of the sensor used?
Would be interested in this sensor too
@@maxmustermaenchen6401 TTP223
@@DikkatOyun15 nope it's not. It won't fade out like in the video. You need a capacitor for that.
The moderator seems to be very busy. Maybe I helped.
@@maxmustermaenchen6401Pudiste encontrar el nombre del sensor?
Weird that looks exactly like the table from the video called
"A Smart Table of Epoxy Resin"
which was done a year ago
One of the first things he said was he based it off that video. He even showed the video on his phone. 0:15
Alguien sabe dónde se puede conseguir ése mismo sensor? He visto muchos similares pero ninguno así de práctico
yes pls tell us which sensor is it ?
Can you please tell me which LED driver (touch
switch) you used?
Can you please share the measures of the table, honey comb and circles in the back
Or if you can share the CNC file please
Just tell us the sensor name...
Please 🙏🏽
Pudiste encontrarlo?
We have these.
Hello, I liked your video very much. I want to build my own desk, how can I buy this driver card? can you share the link?
You are wild for doing this inside of an apartment, with an open kitchen.
Hi ! Does anyone have the reference for driver circuit board present in the video please ?
This looks amazing! I’m trying to build one for a school project but am having a hard time with a few things. Are you able to supply the circuit diagram or what board you used and the CAD file? Thanks!
It’s pretty easy to design in a CAD environment. You can just look up honeycomb pattern
Hello, can you make me such a chip, please ttp 223 I. Need it 🙏🙏🙏
@@karimArt1 We have these.
We have these.
조명 스트립과 드라이버 회로 기판은 어디서 구입 할 수 있나요?
Superb ,
Broo, what a talent
I made this table in red color. If you want to buy it, you can contact me.
Please tell the name of transformer(power supply). How much supply this arrangement requires?
depends on the size of the table silly. Just look up the current usage of a 5050 led and then multiply it by the ammount of leds in each circle and then multiply again by the ammount of circles.
Can tou add link for sensor
What is the link for the sensor?
Is that copper tube as induction coil??
It works as range extender check my channel
great idea... where can we buy those chip you use for the sensor?
nice work
Just tell us this sensor name please
What is?
The green colour circuit board where i can buy this?
Can i just buy this
We have these.
Add link for sensor please 🙏 sir
Can you share the cnc project file?
Please when i can bye these sensor please
Dame un precio de la compro
Nice work!
Probably had been asked before - but do you sell the circuit boards that you use? (Around minute 2:00)
He didn't make that table and yes u can buy them from China
@@woodworking990 do you know name of the circuit board what he use ?
👍💓
How much?
Tá bom
Vai vender por
1.000.000¥
link sensor pl
What is the sensor?
Hello, can you make me such a chip, please? Thank you ttp 223 please 🥺
copied from axe:garage?
nice.. say, if you were in the mood to do one more for me, how much would you charge me in total with material, work, secondary facilitating and shipping to czech republic??😉
I made this table in red color. If you want to buy it, you can contact me.
Świetna robota! Mam prośbę czy mógłbyś udostępnić pliki CNC? Z góry dziękuję i pozdrawiam.
mozna takie uklady kupi gotowe ?
Da mozna na aliexpress
wow
WİTCH KİND OF TTP223 ?
OR DİD YOU FİX ?
I'm working on similar table and I'm using red ttp223 sensors
What is the name of the sensor?
@@woodworking990
Did it work totally like the video
在家里用打磨机，邻居不投诉的吗？
Can you please tell me which LED driver (touch switch) you used?
I need that information too 😅 🙏
Maybe I helped.
@@moreboonshow ?
@@moreboonsWhat is the name? I need it for my project
@@hakatari9622What is the name for the sensor?