I stuck the LED strips on the back of the board shining onto the wall, it bounces off the wall to create a softer illumination. Hope I have answered your question. Pls sub if you enjoyed this 😁🙏🏻
@@alangadgets Thanks for the orientation tip. I'm getting excited to setup my own office now (still drywalling) I'll have a larger wall and since I already have standard pegboard accessories my plan is to cut some custom pegboard sizes and paint then stick on some lights facing backwards. Hope to share sometime.
thanks! the paint color is Nippon paint 8151 nipponpaint.com.sg/colours/find-your-colour/8151/mysterious/, the LED strip I'm using is WS2812B LED Strip with SP110E Bluetooth LED Controller s.click.aliexpress.com/e/_Dls4z1h I also checked out and subscribed to your channel, great PC hardware reviews. do check out my custom PC desk and enclosure video. Please sub 🙏😁
Looks very nice! Great video 👍🏻 IKEA does have some good things for sure! Just bought similar boards for my Xbox corner. But I only use them as decoration for the wall with led. Don’t really like to have things hanging. I still need a couple of nice gadgets for it to be done. You have any ideas?
Did you drill holes in the peg board to pass on cables for Canon & other chargers as for a two pin socket,the other side of wire is pretty thick,,how did u manage to pass it thru?
I didn't pass the wires through actually, I ran the cables along on the board with some sort of cable clips on the board. It's not so visible as they are black in color
@@_Paul. thanks! I got it with the pegboard as a bundle, you can also get it as a separate set www.ikea.com/sg/en/p/uppspel-4-piece-pegboard-accessories-set-dark-grey-00498387/
I don't know the exact type of the screws, they were recommended by a local hardware store. All I know was that they were some phillips flat heads and screw size of 3mm in thickness, stainless steel. Hope that helps
The pegboard is made of compressed cardboard, although very hard and sturdy I won't advise putting a console on it. No guarantee that it could hold for a prolonged period.
@@DarkMasta95 projectperfecthome.com/how-much-weight-screw-hold/ The right size of stainless steel screw could hold a lot. But items like Xbox are bulky and could have more outward pulling force. But for Airsoft guns and swords, the weight is more spread out and flatter in form factor so I would think it's much safer
Looks good! Do you have details on where and how you stuck the RGB LED strip along the back, curious about which way it's pointing.
I stuck the LED strips on the back of the board shining onto the wall, it bounces off the wall to create a softer illumination. Hope I have answered your question. Pls sub if you enjoyed this 😁🙏🏻
@@alangadgets Thanks, i was curious if it was back facing or other. Subbed! Maybe another battle station update in the future is in order. ;)
@@philsowers thanks for the sub! It was fun setting it up!
@@alangadgets Thanks for the orientation tip. I'm getting excited to setup my own office now (still drywalling) I'll have a larger wall and since I already have standard pegboard accessories my plan is to cut some custom pegboard sizes and paint then stick on some lights facing backwards. Hope to share sometime.
@@philsowers yes pls do!
Hi Alan! Great video! Just bought two of these myself today and was wondering how you attached the chargers to the pegboard?
I use self-adhesive velcro tape between the board and chargers so that I can replace them easily if needed. pls sub if you haven't already 🙏 cheers!
Looks awesome, clean look!
Thanks! Pls sub 🙏🏻
Looks beautiful! What paint are you using on the wall, and the rgb strip?
thanks! the paint color is Nippon paint 8151 nipponpaint.com.sg/colours/find-your-colour/8151/mysterious/, the LED strip I'm using is WS2812B LED Strip with SP110E Bluetooth LED Controller s.click.aliexpress.com/e/_Dls4z1h
I also checked out and subscribed to your channel, great PC hardware reviews. do check out my custom PC desk and enclosure video. Please sub 🙏😁
Looks very nice! Great video 👍🏻 IKEA does have some good things for sure! Just bought similar boards for my Xbox corner. But I only use them as decoration for the wall with led. Don’t really like to have things hanging. I still need a couple of nice gadgets for it to be done. You have any ideas?
Thanks! You could at least hang your controllers headphones etc, keep them near and tidy. Pls sub 😁🙏🏻
Very cool video!
Thanks! Please subscribe 🙏🏻😁
Did you drill holes in the peg board to pass on cables for Canon & other chargers as for a two pin socket,the other side of wire is pretty thick,,how did u manage to pass it thru?
I didn't pass the wires through actually, I ran the cables along on the board with some sort of cable clips on the board. It's not so visible as they are black in color
Amazing job.....!!!
Thanks!
Damn id love a shelf like this but i live in a rental where i cant drill on the wall.. sucks.
That does sucks..
Good video, thanks!
Thanks for your sub! 🙏🏻
Could you please write down your wall colour?
Nippon Mysterious (8151) & Bluebell White (8159), hope this well and please subscribe 😁🙏🏻
How do you put the leds?
I stick them onto the back of the pegboard using double sided tape
What accessory did you use to hang the tripod. It looks different than the other hooks
It's the hook that was meant for hanging game controllers, I repurposed it.. haha... Pls sub if you enjoyed it 😁😂
@@alangadgets Done! Where did you find it
@@_Paul. thanks! I got it with the pegboard as a bundle, you can also get it as a separate set www.ikea.com/sg/en/p/uppspel-4-piece-pegboard-accessories-set-dark-grey-00498387/
Where did you get the Black/Grey hooks, tubs and shelves from? I can only see these accessories in white on the Ikea website...
After some research I've found out that Ikea sell them in this colour in every country apart from mine, pretty much lol!
@@DrazOutshineGaming ya they are pretty much out of stock now here as well... *Sign*
@@alangadgets time to pull out the spray paint 🎨
What screws and such did you use to get it into the wall?
I don't know the exact type of the screws, they were recommended by a local hardware store. All I know was that they were some phillips flat heads and screw size of 3mm in thickness, stainless steel. Hope that helps
@@alangadgets thank you
I’ll go down and ask them today 🤙🏻
@@SATVRDAY13 pls sub if you haven't already? 🙏
@@alangadgets done!
are the hooks painted or did they come in black? I cannot find black hooks on ikea
they had it in Singapore, but it has been out of stock for some time now... :(
www.ikea.com/sg/en/p/skadis-hook-grey-10321642/
Do I need to buy extra for the c-bracket on the back of UPPSPEL, at ikea？？？
All mounting brackets are provided
@@alangadgets Thanks！！
@@颜耀俊 you're welcome! Please subscribe if you haven't already 😁🙏🏻
Could I mount xbox to is the pegboard metal? How much weight can it hold?
The pegboard is made of compressed cardboard, although very hard and sturdy I won't advise putting a console on it. No guarantee that it could hold for a prolonged period.
@@alangadgets so it wouldn't be able to hang airsoft weapons and other dispolay itens like swords and such right?
@@DarkMasta95 projectperfecthome.com/how-much-weight-screw-hold/
The right size of stainless steel screw could hold a lot. But items like Xbox are bulky and could have more outward pulling force. But for Airsoft guns and swords, the weight is more spread out and flatter in form factor so I would think it's much safer
😮😮😮😮Wow