You are a life/wallet saver. My passenger window is stuck down and I'm not about to pay $230+ to get it fixed. Just gonna remove the panel myself and get it raised back up, or even just go to the repair shop with the panel already off (along with the necessary motor) so they don't charge me as much to do that part
Love that you highlighted the location of screws and clips so clearly. I might take a stab at installing sound dampening inside my door panels now. Many kudos to you for a great video!
Hi lindah have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
Wow your awesome and detailed!! Still couldn't pull of my left rear door of an older 2003 mitsubbishi highlander...(trying to fix stck window). Have to do more research on my car
Thank you very clear and helpful I remember once removing the panel of my BMW and under it was this Clear film stuck with butyl tape. What a mess getting that off and put it back on. I’m sure there’s a better way.
very nice informational video bro. but i have just one issue those blinking highlights are blinking too quickly and make the video uncomfortable to watch. otherwise very nice chanel and great content!
The one thing I was forgetting was the screw in the door handle, I knew it was a screw somewhere up there but because I couldn’t see it I didn’t even try to go for it lol
After removing the door card using tips in this video, what to do with foam layer? Assume its there for sound deadening. Can it be removed non-destructively?
I ended up using a heat gun to loosen the glue around the edge. Pealed off the foam layer. Then afterwards when putting back together, reapplied the heat gun around the edge to make the glue tacky and pressed the foam layer back into place. Would have been much harder without a heat gun.
My bolt is stuck !!! It is just spinning and spinning !!!! I need to get behind it but I can’t because there is a plastic housing protecting the bolt !!!!
My family have a Adventure 2008 GLX and one time I was putting wd-40 the red long thing fall down to the inside below the window thing and I got so annoyed that I want to learn how to remove the door siding panel right side in passenger seat. I'm 17 tho and I'm transitioning to learn more about car.
My door panel on Skoda Fabia MK1 is stuck where it joins with the window. It's impossible to get unstuck without tearing. It's that thin plastic piece that comes right between the window and the door. Any advice?
I’m buying some aftermarket speakers for my car and they are recommending me to buy some kinda tool to take out the door panel for 20 bucks should I buy them or ?
I don’t know why they would be asking 20$ for the tool to remove the panel it should be included with the install so is find a different place or tell them to get their own tool
Do assembly in reverse of disassembly. Take a video ad you go or take pictures of each screw/part removal as you do it and then look at pictures in reverse to reassemble door again.
You are a life/wallet saver. My passenger window is stuck down and I'm not about to pay $230+ to get it fixed. Just gonna remove the panel myself and get it raised back up, or even just go to the repair shop with the panel already off (along with the necessary motor) so they don't charge me as much to do that part
What vehicle do you drive ? I’m having the same problem
Amazing video!! Really covered everything. Now I can fix my wifes door panel. I had no idea how to do it before.
GREAT video. the fact u cover all different makes and models is KEY
Love that you highlighted the location of screws and clips so clearly. I might take a stab at installing sound dampening inside my door panels now. Many kudos to you for a great video!
Very explicit and idiot-proof explanation, a true expert. A higly deserved like.
Thank you for this! Just managed to fix a door handle on my Pontiac without breaking anything and this video surely helped a lot:)
63 year old single farm gal..I have to fix all. Thank you very much for your knowledge and sharing it! You teach very well too!
Hi lindah have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
Thank you very much.honestly u covered everything about door panels
Many thanks!! very informative-I think you saved me a few thousand "cuss" words!!
THANK YOU SO MUCH , Sir, Mr EXPERT ! The Lord Jesus bless your family !
Make It Easy Mechanic:
Thank you for sharing/posting...as always, your instruction video is awesome and Ive learned a lot.
I absolutely suck at mechanical stuff but after seeing your video once I was able to remove the door panel without a problem. Thank you!
Thanks so much for this, saved myself a few hundred quid and fixed my jeep. You're a life saver 🤗
Thank you kind sir. You saved my interior from the rainy season.
Thank you for making this video. I've learned so much in just the first 5 minutes.
thank you for this approach. You give tips and tricks that take several jobs to learn doing it by yourself
This video was all I needed to get the comfidence to go ahead and install my new speakers, tomorrow :)
I can not think of a single thing that could have made that video better. Excellent job. Thanks.
are we all here to fix a window 😂😂
Not me, just wrapping my Anterior
Man I wish my door won't close
I am
Wow your awesome and detailed!! Still couldn't pull of my left rear door of an older 2003 mitsubbishi highlander...(trying to fix stck window). Have to do more research on my car
Thanks 🙏 this helped me a lot and answered my questions! I feel more confident now ❤ God bless you
Well done! Saved me a couple of hours!
I just found you and subscribed!! Thank you for your service and support ❤
Thank you very clear and helpful
I remember once removing the panel of my BMW and under it was this Clear film stuck with butyl tape. What a mess getting that off and put it back on. I’m sure there’s a better way.
I have a ldv g10. Loving your helpful video, I was quoted $500! Still stuck tho 😢
Very useful than my training center school teacher! Thank you very much!
very nice informational video bro. but i have just one issue those blinking highlights are blinking too quickly and make the video uncomfortable to watch. otherwise very nice chanel and great content!
Brilliant video, very informative 👏
Hard designs. Thx man.
good and quality full video
Thank you so very much!😊
The one thing I was forgetting was the screw in the door handle, I knew it was a screw somewhere up there but because I couldn’t see it I didn’t even try to go for it lol
After removing the door card using tips in this video, what to do with foam layer? Assume its there for sound deadening. Can it be removed non-destructively?
I ended up using a heat gun to loosen the glue around the edge. Pealed off the foam layer. Then afterwards when putting back together, reapplied the heat gun around the edge to make the glue tacky and pressed the foam layer back into place. Would have been much harder without a heat gun.
Very useful information
My bolt is stuck !!! It is just spinning and spinning !!!! I need to get behind it but I can’t because there is a plastic housing protecting the bolt !!!!
My family have a Adventure 2008 GLX and one time I was putting wd-40 the red long thing fall down to the inside below the window thing and I got so annoyed that I want to learn how to remove the door siding panel right side in passenger seat.
I'm 17 tho and I'm transitioning to learn more about car.
Bravo! Excellent video
Thanks for the video would have probably broken my door 🤣
My door panel on Skoda Fabia MK1 is stuck where it joins with the window. It's impossible to get unstuck without tearing. It's that thin plastic piece that comes right between the window and the door.
Any advice?
ruclips.net/video/lh7ndmQQbyI/видео.html
I think this is what you need
Wonderful explanation
Excellent video. Thanks.
very nice video sir
awesome lesson. thank you
bravo sir!
Awesome video
Very well done! Thank you!
Good job
Excellent video thank you so much.
Thank you.
All that to simply remove the interior shell of a door. Smh. Over-thought, far too over-engineered and needlessly complex.
It's so you aren't able to do it yourself and have to take it in for repairs. Same thing with your phones, laptops, etc.
Not really that complex
Great video. Thanks .
That was super helpful!
If you only need access to the top, do you still have to take out the whole thing?
Depends on the panel, but usually - yes, you do.
no BS, thank you
Thanks
Thanks!
Now to fix the window 😢
Thanks a lot!
those engineers think they're supposed to play hide and seek with those screws ( ͡° ͜ʖ ͡°)
Aren't you having a hard time getting the lock in order to disconnect it to pull the panel out
How when the door will not open at all?
2008 jeep patriot inside door panel
Thank you.. so much
God bless you all
I’m buying some aftermarket speakers for my car and they are recommending me to buy some kinda tool to take out the door panel for 20 bucks should I buy them or ?
I don’t know why they would be asking 20$ for the tool to remove the panel it should be included with the install so is find a different place or tell them to get their own tool
Not if can't open the door at all!!
YesSiRr!!😎😁😊👌👊👍🔥💯
okay soooo, how i put the door panel back on
Do assembly in reverse of disassembly. Take a video ad you go or take pictures of each screw/part removal as you do it and then look at pictures in reverse to reassemble door again.
جميل جدا تسلم
اشكرك
Thank you! Very informative.
Awesome video
Thank you for Great Video
Thank you very much