Lost my comments. I was saying I learned on machinery of that era and eventually advanced to NC tape controlled K&T tool changers before I got fed up with the Union and left for the military. I can see many things that would make their jobs much easier and their tools last much longer but that is just me. I must say however these men do a great job working with what they have.
I'd wager the only parts original in those machines would be the chassis. Everything else was probably replaced piecemeal over the course of the 70 years they've been in that shop.
Now I'm not a metal lathe worker. and only know what I saw on RUclips of a lathe. But let me put it this way: I'm not really impressed. in fact I am thoroughly unimpressed.
Un professionnel de haut niveau, beaucoup d'expérience concernant ses travaux de tournage, d'alésage et j'en passe, mes respects Monsieur j'espère qu'on vous rémunère à la hauteur de votre travail je lève mes 2 pouces, encore merci pour votre vidéo ,vous êtes un exemple pour les jeunes tourneurs ; Mes respects Monsieur
Those are some massive deep cuts for one pass and the swarf build-up around each machine is horrendous, but fair play they are giving a few more years life to whatever that pinion is out of.
I’m self employed semi-retired precision engineer and have used manual machinery for years. Because I was near to retiring it wasn’t worth me buying CNC machinery. It nice to see that some people are still doing things the way I’ve always done them. I’m appalled at their lack of safety equipment though. No safety shoes or eye protection is madness. One other point; the title says 100 years old technology. The principles might be old but the actual machines are at most 60 or 70 years old.
OSHA nightmare. Open toed shoes, no eye protection, loose clothing around machines and so on. Hence the older guy operating the shaper with half a thumb.
Exactly... machines make things, with the aid of craftsmen, more accurate than themselves, including other machines. The first lathes were crude 'dead centre' setups and were used to make the spindles for better ones, which were used to make accurate slides that led to mills and shapers..... Soft steel was case hardened for wear and hand fitted, enabling the machining of later alloy steels with high speed and latterly carbide tool bits. It's all a progression. The old cam operated automatic lathes have now given way to CNC with all of its speed and versatility......... But there's still room for the jobbing engineer that can make one of something to OEM specs when factory parts are not available. How many young folk today know how to forge and temper a leaf spring for an old gun? Not many I'd say from the people that come to me with long faces and broken old firearms... 🙂
Compared to this shop the few commercial American machine shops I ever set foot in were compulsively obsessed with cleanliness (chip removal) and unnecessarily high flows of coolant/cutting fluid. That the gear hobbing machine had a functional cutting fluid system surprised me. I expected an old man or a boy with a coke bottle. Where are the apprentices? I was under the impression that chip removal and dribbling cutting fluid was a prime purpose of machine shop apprentices.
This kind of stuff is great for new metalworkers to see the basics of machining applied and in action at a very slow pace; its often difficult to see and understand whatva CNC macine is doing because if the speed. I love watching these people in poorer countries use creative ways and their ingenuity to make things like this.
I was taught many decades ago that really skilled people can make almost anything with basic tools, and I have found that to be true. I once made a complete telescopic sight base and rings for a rifle with just a hacksaw, pliers and files. I didn't have a vice, or even a pair of vice grips at the time, but I did have a small propane torch for the brazing. It turned out OK and worked well on a P14 303 rifle that I had at the time. That would have been in 1962 or so when I was living in a bed-sit in Auckland, NZ, so no workshop facilities at all. I was 20 then... It's amazing what you can do if you try. Happily, these days I have a decent lathe, mill, forge/anvil, welders, vices, measuring equipment etc. etc. ..... Sures does save time and it's so much easier to be really accurate... :-)
believe it or not, some of these places are run by wealthy people ... they purchase all this old equipment for a cheap price and they hire these workers for a very low wage and have stuff made for them ... often the parts are then shipped over seas to suppliers. Just look at the lathes they are using, these workers right there have at least $50,000 dollars in equipment ... there is no way they would be able to afford that kind of money.
the work these blokes do would be absolute unacceptable on modern equipment. you see a bunch of hard working old men and think that just because they are hard working that they are skillful. no sir. i dont even operate gear cutters or lathes and i can point out tons of things that i would not allow to happen on my job.
Craftsmen... turning out work much more accurate than the machines they are using. Health and Safety people would have a fit, but hey they get 'er done. The heat treat furnace is a doozy... and they seem to use the Mk1 eyeball for hardening temperature... oh... no... he has a remote pyrometer, and a hardness tester... cool... 🙂 I note in all of these videos that their tooling is shop made with brazed carbide tips, which would certainly save a lot of expense for folk who's currency is probably not that buoyant. Well done guys... great job.... even though it would give the average machinist in the West the willies, it works.
These guys are doing amazing work despite the appalling work conditions. There is obvious pride in their work. Those without any knowledge ( YT seems to find them all) may view it as slapdash. That absence of younger workers is a worry. Every country that considers itself advanced in it''s manufacturing methods worked exactly like this only a few generations ago.
The machinists could not work around that problem. It was the piece that was cast and its circumference at the splash was less than the diameter that was per specifications. You can only take off material and not add it. Unless you weld extra at the splash to build it up. Evidently, at that splash, it did not interfere with the connecting pieces. I see some comments are critical but to me, these guys show years of experienced craftsmanship working in a country that does not have immense resources. I love to watch these clips showing different cultures.
lol if they go blind they end up jobless on the street which I would assume is only marginally worse than working under these conditions living in a mud hut.
Truly amazing skill and workmanship. Appalling safety standards! Baggy clothing, open shoes, no eye protection, no hearing protection, open moving machinery and belts ........
Vielen Dank für Ihren Respekt und Ihre Grüße aus Deutschland! Wir schätzen Ihre Unterstützung sehr. Greetings zurück an Sie und alle unsere Freunde in Deutschland! 🇩🇪👷♂️🛠️
O trabalho desses profissionais é brilhante e merecem todo nosso respeito. O que entristece é ver as condições insalubres nas quais trabalham. EPI' são perfeitamente dispensáveis. Níveis de ruídos baixíssimos, nada pode cair na cabeça e muito menos nos olhos deles, botas e luvas pra quê tbm não é verdade? Mangas compridas próximas de maquinas rotativas tbm não são problema. O trabalho final mereceu nota 1000.
E o tratamento térmico fake no final ? aquilo não foi uma cementação e nem mesmo uma têmpera, foi apenas para escurecer a superfície da peça e dara a impressão de que ela foi tratada corretamente.
Интересно посмотреть на старинные станки! Я сам точил обоймы упорных подшипников на танки, и экскаваторы из стали ШХ-15, диаметром 30105 мм. на карусельном. Видел как точат колёсные пары для вагонов БРЖК. Видел, как точат сектор с зубцами на карьерный экскаватор, на карусельном с планшайбой в 25 метров. Все станки давно переплавлены в металлолом, на том же заводе, и проданы за границу...
@@СибесStimmt, ich schaue mir immer diese Videos mit einem leichten Gruseln an. Wenn ich mir diese herunter gekommenen Werkstätten, den Umgang mit den Werkzeugmaschinen und Werkstücken weiß ich warum Pakistan zur dritten Welt zählt. Es nichts mit Geld, Technik oder Religion zu tun. Es es liegt an dem mangelnden Wille etwas „gut“ oder „besser“ zu machen. Alle sind zufrieden wenn es gerade so eben funktioniert. Weit kommt man so aber nicht und das erkennt man deutlich
gotta love these videos. Notice, the SAFETY of the workers involved. nobody wears personal protective equipment. No face shields, no safety glasses, no safe clothing, no safety boots, no safety gloves. You have rotating heavy equipment tools and no guards, no anything. Just a bunch of fellas risking lives, fingers, eyeballs to destruction. I don't give a rat's arse about it being in a Third World Country. Stupid is stupid, and showing videos like these of fools is despicable. If Pakistan and India have modern navies, and modern mechanical engineering aptitudes. They can just as equally provide workers safe work spaces. This folks is why these countries can cheat costs and steal labor from westernized countries. There is no SAFE LABOR Government Agencies policing unsafe work practices, there are no Pollution programs to ensure safe rivers, streams, and lakes. This is repulsive.
I would love to know how close their apex measurement is on that double helical, because I have manufactured similar shafts like that (turn, hob, grind) with far more sophisticated machinery and I know that I had to have that apex measurement within a couple thousandths of an inch. I can't believe they can get that same kind of accuracy with the machinery they are using.
Se fabricam e pq funciona...eu tbm trabalho com usinagem e com máquinas modernas.....mas não duvido da qualidade do serviço deles por mais rústico q seja
OSHA would have a field day with all the violations in that factory, open toe shoes, loose fitting clothing, no eye protection, trip hazards everywhere, etc. However, they do some pretty damn good work in spite of all the hazards.
That workshop can use an upgrade into the same millennium as the posting date of the video. If a kaizen team goes there for optimization and you ask them what should be improved, the answer is "Yes!" No disrespect to the people working there, but when we take better care of the people actually doing the work, they can do a better job for us.These guys could do with an investment in safety and technology. Give them the proper tools to do a proper job and they'll earn you a proper profit margin.
And to think, this is the tooling, men and metals that built the industrialized world. Technology has been updated about 50 years . I wouldreally like to work in this shop for a year or so. With a pair of Red Wings on though. And a welding helmet.
checking the keyslot width with a caliper? this is critical. if too wide, the key will rock, and ruin the shaft. shoulld be a light press fit. i didnt see a dial indicator once in this vide ( although i fast forwarded and am open to be corrected). quality job 3 safety job 5.
Jeez, a little coolant sure wouldn't hurt when turning with high speed steel bits. That's how I learned to do it 45 years ago. And just a suggestion; change out of your pyjamas and put on some shoes. Not going to get into the appaling rigging practice of tying knots in chain slings.
It is stunning that there are still workers being treated this poorly. PPE is not all that expensive. It is corporate abuse, plain and simple. The owners have no humanity. It is helpful that this channel demonstrates how cruel the world still is. American industry would be doing the same thing if they could. UNIONS stopped them!
You've raised an important point. Safety and fair treatment of workers should always be a priority. While our machinists might not have all the resources they deserve, they demonstrate resilience and skill in their craft. 🛠️💼 Let's continue advocating for better conditions for all workers! 💪🌟
So true ! All of the negative commenters would not have have the skill to touch this job believe me i have worked with many know it alls over 35 years in the trade ! Cut a key way with a shaper ? What is a shaper you would be asked ?
they actually have electric hoists . how revolutionary. on the other hand remember pakistan is a nuclear power. and this shop is considers higher tech than most i have seen on youtube.
Indeed, innovation comes in many forms! 💡🛠️ Our machinists make the most of what they have, showcasing their resourcefulness and skill. Every shop has its own unique charm! 🌟🔧
Absolutamente! A combinação de profissionalismo, organização e segurança é fundamental para o sucesso de qualquer indústria, independentemente do país. Nossos mecânicos demonstram habilidades excepcionais nesses aspectos, mostrando que excelência transcende fronteiras! 🌍🛠️👷♂️
Lost my comments. I was saying I learned on machinery of that era and eventually advanced to NC tape controlled K&T tool changers before I got fed up with the Union and left for the military. I can see many things that would make their jobs much easier and their tools last much longer but that is just me. I must say however these men do a great job working with what they have.
I think the only positive I can take away from this video is to say that it is really impressive how much life they squeeze out of their machines.
I'd wager the only parts original in those machines would be the chassis. Everything else was probably replaced piecemeal over the course of the 70 years they've been in that shop.
while not taking any care. Bumping them, trowing the chains on the ways, no even cleaning the chips.
Now I'm not a metal lathe worker. and only know what I saw on RUclips of a lathe. But let me put it this way: I'm not really impressed. in fact I am thoroughly unimpressed.
Their machines were ours at one time.
@@marcelschellekens6386it’s normal..you don’t know anything…about
Un professionnel de haut niveau, beaucoup d'expérience concernant ses travaux de tournage, d'alésage et j'en passe, mes respects Monsieur j'espère qu'on vous rémunère à la hauteur de votre travail je lève mes 2 pouces, encore merci pour votre vidéo ,vous êtes un exemple pour les jeunes tourneurs ; Mes respects Monsieur
non pas du tout, il y a beaucoup d'erreurs d'amateur
A little of that slippery stuff called oil or grease would help that tailstock to mov
nah grease cost money the owner could use to buy another trip to dubai.
You would think as hard as that machine is working for them that someone might spill a little oil on it occasionally,,,, or even once.
Brush the ways? Na.
Videos like these let me forget about my little problems at work like not having this one specific drill with TSC capability or a new set of parallels
Oh my god the top steady roller is a piece of wood!
I was very relieved to see that they regularly swap that piece of wood out for a new one and use plenty of lubricant!
i sent this off to a friend who works at Komatsu and he had to show it to the entire engineering dept. he said 'everything just stopped.'
What are you talking abo.... OH. MY. GOD!!
Можно и без него)))
Those are some massive deep cuts for one pass and the swarf build-up around each machine is horrendous, but fair play they are giving a few more years life to whatever that pinion is out of.
Old tecnology is not bad only needs it's time to work.
Yep, it take too long
it has a reason why CNC has taken over
Heavy machining in sandals takes some balls.
I’m self employed semi-retired precision engineer and have used manual machinery for years. Because I was near to retiring it wasn’t worth me buying CNC machinery. It nice to see that some people are still doing things the way I’ve always done them. I’m appalled at their lack of safety equipment though. No safety shoes or eye protection is madness. One other point; the title says 100 years old technology. The principles might be old but the actual machines are at most 60 or 70 years old.
My total respect to these men.👍👍❤️
This is probably a job shop. They do one time orders and limited part orders. Very skilled machinists and never a boring day.
There is boring every day.
Fantastic tradesmen. Lots of experience there. thanks for showing from USA.
They probably just got the order that morning and I love the safety sandals they wear
Designed for comfort when working on hard gravel floors. They seem to have not over looked anything.
OSHA nightmare. Open toed shoes, no eye protection, loose clothing around machines and so on. Hence the older guy operating the shaper with half a thumb.
@@ricku4856 ....no hearing protection...
@@ricku4856 ...tripping hazards everywhere you look...
@@ricku4856 They were even bumping the machine while the piece was still attached to the crane.
That 100 year old technology was used to bootstrap today's multi-million dollar CNC machines. Humble beginnings :-) Stay safe.
Exactly... machines make things, with the aid of craftsmen, more accurate than themselves, including other machines. The first lathes were crude 'dead centre' setups and were used to make the spindles for better ones, which were used to make accurate slides that led to mills and shapers..... Soft steel was case hardened for wear and hand fitted, enabling the machining of later alloy steels with high speed and latterly carbide tool bits. It's all a progression. The old cam operated automatic lathes have now given way to CNC with all of its speed and versatility......... But there's still room for the jobbing engineer that can make one of something to OEM specs when factory parts are not available.
How many young folk today know how to forge and temper a leaf spring for an old gun? Not many I'd say from the people that come to me with long faces and broken old firearms... 🙂
Doing the best with what they've got.
A good serviceable turret lathe like a Herbert 12C would do all that they need and more.Beautiful machines.
Техника безопасности на высоте
Compared to this shop the few commercial American machine shops I ever set foot in were compulsively obsessed with cleanliness (chip removal) and unnecessarily high flows of coolant/cutting fluid. That the gear hobbing machine had a functional cutting fluid system surprised me. I expected an old man or a boy with a coke bottle. Where are the apprentices? I was under the impression that chip removal and dribbling cutting fluid was a prime purpose of machine shop apprentices.
This kind of stuff is great for new metalworkers to see the basics of machining applied and in action at a very slow pace; its often difficult to see and understand whatva CNC macine is doing because if the speed.
I love watching these people in poorer countries use creative ways and their ingenuity to make things like this.
What is the measurement method for making sure the gear cuts are properly clocked / aligned?
I would wonder that too. They need to be near perfectly clocked and concentric. somehow I doubt that they are.
@1:43 3/4 thumb up. Absolutely love this guys attitude. 👍
Humble Pride
It's amazing what kind of great looking work guys in sandals on a dirt floor with near junkyard grade equipment can manage.
"great looking" being the appropriate part here.
just coz it's old doesn't mean it's junk. built back when things were made to last, not made to break in the most profitable length of time.
One guy was bare foot...?
I was taught many decades ago that really skilled people can make almost anything with basic tools, and I have found that to be true.
I once made a complete telescopic sight base and rings for a rifle with just a hacksaw, pliers and files. I didn't have a vice, or even a pair of vice grips at the time, but I did have a small propane torch for the brazing. It turned out OK and worked well on a P14 303 rifle that I had at the time. That would have been in 1962 or so when I was living in a bed-sit in Auckland, NZ, so no workshop facilities at all. I was 20 then...
It's amazing what you can do if you try. Happily, these days I have a decent lathe, mill, forge/anvil, welders, vices, measuring equipment etc. etc. ..... Sures does save time and it's so much easier to be really accurate... :-)
Just imagine what these blokes could do with more modern equipment 👍👍
believe it or not, some of these places are run by wealthy people ... they purchase all this old equipment for a cheap price and they hire these workers for a very low wage and have stuff made for them ... often the parts are then shipped over seas to suppliers. Just look at the lathes they are using, these workers right there have at least $50,000 dollars in equipment ... there is no way they would be able to afford that kind of money.
the work these blokes do would be absolute unacceptable on modern equipment. you see a bunch of hard working old men and think that just because they are hard working that they are skillful. no sir. i dont even operate gear cutters or lathes and i can point out tons of things that i would not allow to happen on my job.
Felicitaciones a todo el Grupo ,que Trabajo con ese ,Engranaje Elicoidal !!!
Craftsmen... turning out work much more accurate than the machines they are using. Health and Safety people would have a fit, but hey they get 'er done.
The heat treat furnace is a doozy... and they seem to use the Mk1 eyeball for hardening temperature... oh... no... he has a remote pyrometer, and a hardness tester... cool... 🙂
I note in all of these videos that their tooling is shop made with brazed carbide tips, which would certainly save a lot of expense for folk who's currency is probably not that buoyant. Well done guys... great job.... even though it would give the average machinist in the West the willies, it works.
Can we see where the forging blank came from?
i can not stress enough that this is not, how this should be done. Every part is wrong.
@@johnnicol8598 And is why every engineering firm recommends not sourcing from India or China.
These guys are doing amazing work despite the appalling work conditions. There is obvious pride in their work. Those without any knowledge ( YT seems to find them all) may view it as slapdash. That absence of younger workers is a worry. Every country that considers itself advanced in it''s manufacturing methods worked exactly like this only a few generations ago.
Меня одного смущает огромная проплещина на валу?😮
Да не тебя одного. Может как-то зашпаклюют?
The machinists could not work around that problem. It was the piece that was cast and its circumference at the splash was less than the diameter that was per specifications. You can only take off material and not add it. Unless you weld extra at the splash to build it up. Evidently, at that splash, it did not interfere with the connecting pieces. I see some comments are critical but to me, these guys show years of experienced craftsmanship working in a country that does not have immense resources. I love to watch these clips showing different cultures.
это далеко не первое что смущает -_-
не правильная центровка заготовки На этом валу с одной стороны много снимают, а с противоположной стороны проплешина
The handheld welding mask is only slightly better than the other welder without one!! LOL!! Do they have good healthcare or blindness coverage??
No but they all have a nice flash burn !!!!!!!
lol if they go blind they end up jobless on the street which I would assume is only marginally worse than working under these conditions living in a mud hut.
no such thing in these parts of the world
Truly amazing skill and workmanship. Appalling safety standards! Baggy clothing, open shoes, no eye protection, no hearing protection, open moving machinery and belts ........
Yes, appalling. Awesome skill but It makes me feel ill thinking about the very real potential for serious injury/death.
I'm sure they were using much sharper tools 100yrs ago.
Skillfull workers!❤ my respects!
Fantastic work. The videos are amazing and men true craftsman.
Respect. Greetings from Germany to this workers.
Vielen Dank für Ihren Respekt und Ihre Grüße aus Deutschland! Wir schätzen Ihre Unterstützung sehr. Greetings zurück an Sie und alle unsere Freunde in Deutschland! 🇩🇪👷♂️🛠️
Hardworking people... 👌👍
Its wild coming from a clockmaker remaking a antikythean calender in bronze and then jump to these guys just making it work. Amazing content.
O trabalho desses profissionais é brilhante e merecem todo nosso respeito.
O que entristece é ver as condições insalubres nas quais trabalham.
EPI' são perfeitamente dispensáveis. Níveis de ruídos baixíssimos, nada pode cair na cabeça e muito menos nos olhos deles, botas e luvas pra quê tbm não é verdade?
Mangas compridas próximas de maquinas rotativas tbm não são problema.
O trabalho final mereceu nota 1000.
E pior que quem compra no final não está nem aí com isso, só quer se beneficiar. O país mesmo que tem que evoluir ora essas melhorias.
E o tratamento térmico fake no final ? aquilo não foi uma cementação e nem mesmo uma têmpera, foi apenas para escurecer a superfície da peça e dara a impressão de que ela foi tratada corretamente.
Great ISO factory conditions. What kind of warranty do they give?
I want to see the unedited version where they replaced the wood on top. Look at the gouge the steady rest left.
Интересно посмотреть на старинные станки! Я сам точил обоймы упорных подшипников на танки, и экскаваторы из стали ШХ-15, диаметром 30105 мм. на карусельном. Видел как точат колёсные пары для вагонов БРЖК. Видел, как точат сектор с зубцами на карьерный экскаватор, на карусельном с планшайбой в 25 метров.
Все станки давно переплавлены в металлолом, на том же заводе, и проданы за границу...
Ugh, no safety for these dudes at all! Impressive work though despite the conditions.
Intelligence, compétence, courage , bravo a ces génies de la mécanique !
Wenn man den Reitstock mit einer Brechstange bewegen muss weiß man das bei der Pflege der Drehbank etwas versäumt hat
Da kann man säubern soviel man will, so wie das gange Anlage aussieht nur sauber machen hilft da nicht mehr 😂😂.
@@СибесStimmt, ich schaue mir immer diese Videos mit einem leichten Gruseln an. Wenn ich mir diese herunter gekommenen Werkstätten, den Umgang mit den Werkzeugmaschinen und Werkstücken weiß ich warum Pakistan zur dritten Welt zählt. Es nichts mit Geld, Technik oder Religion zu tun. Es es liegt an dem mangelnden Wille etwas „gut“ oder „besser“ zu machen. Alle sind zufrieden wenn es gerade so eben funktioniert. Weit kommt man so aber nicht und das erkennt man deutlich
Die Pakistani können alles. Siehst ja, immer wieder wahnsinn
I wonder if Curtis is watching your channel.
Естественно смотрит, он у них учится!
It would be too painful!
I’m sure he has better things to do but it made me laugh to read this. I wonder who else is on his level of quality content creators.😊
gotta love these videos. Notice, the SAFETY of the workers involved.
nobody wears personal protective equipment. No face shields, no safety glasses, no safe clothing, no safety boots, no safety gloves.
You have rotating heavy equipment tools and no guards, no anything. Just a bunch of fellas risking lives, fingers, eyeballs to destruction.
I don't give a rat's arse about it being in a Third World Country. Stupid is stupid, and showing videos like these of fools is despicable.
If Pakistan and India have modern navies, and modern mechanical engineering aptitudes. They can just as equally provide workers safe work spaces.
This folks is why these countries can cheat costs and steal labor from westernized countries. There is no SAFE LABOR Government Agencies policing unsafe work practices, there are no Pollution programs to ensure safe rivers, streams, and lakes.
This is repulsive.
What will this pinion shaft be used for.Massive torque.A turbine to generator ?.Cargo ship engine to propeller? Bridge lift?
tolérance + / - (1/32") and Nice finish for hss Tool. Great expérience boy to Works on old machine like That, but Need more Security.
A bit like sculpture: start with a big lump and very slowly remove tiny pieces!
what the hell is that thing at the top of that steady rest
La "tecnologia"de hoy es prácticamente la misma, lo unico que varia es la edad de las maquinas, milagros, no hay.
I could stand there and watch that lathe cut metal all day.
They do....
I would love to know how close their apex measurement is on that double helical, because I have manufactured similar shafts like that (turn, hob, grind) with far more sophisticated machinery and I know that I had to have that apex measurement within a couple thousandths of an inch. I can't believe they can get that same kind of accuracy with the machinery they are using.
Se fabricam e pq funciona...eu tbm trabalho com usinagem e com máquinas modernas.....mas não duvido da qualidade do serviço deles por mais rústico q seja
OSHA would have a field day with all the violations in that factory, open toe shoes, loose fitting clothing, no eye protection, trip hazards everywhere, etc. However, they do some pretty damn good work in spite of all the hazards.
My respects and congratulations to my dear colleagues, with machine tools we can do wonders, now faster thanks to CNC. Saludos desde Peru.
That workshop can use an upgrade into the same millennium as the posting date of the video. If a kaizen team goes there for optimization and you ask them what should be improved, the answer is "Yes!" No disrespect to the people working there, but when we take better care of the people actually doing the work, they can do a better job for us.These guys could do with an investment in safety and technology. Give them the proper tools to do a proper job and they'll earn you a proper profit margin.
That heat treatment method 😊
Yeah and throwing in the plastic bottle for extra measure. lol
They got 44 Rockwell, at least on the check he showed
@adampindell what does that mean?
i love the precision measuring... with a scale
And to think, this is the tooling, men and metals that built the industrialized world.
Technology has been updated about 50 years .
I wouldreally like to work in this shop for a year or so. With a pair of Red Wings on though. And a welding helmet.
Excellent work 👌❤️
Flip flops and swarf. Seems like nothing could possibly go wrong there!
Это семейное производство?
Incredible work with what they have
Bet that materials soft and thats why they can work it at the speeds they do.
Gasoline showed up to play, I'm thoroughly impressed with their ability to use gasoline for everything.
Are those steel-toed sandals?
They must work because I have yet to see anyone missing toes
Хороший результат и в кучу металлолома
I loved the "fake" hardening. The guy even measured the hardness, as if it were possible to hardening the piece at that temperature.
Accuracy, plus or minus 10mm
20mm plus minus😂
На заднем плане всё тот же мужик сидит и офигевает )))))))
Very impressive, gentleman.
У Аксакала Puma даже есть штангенциркуль!
Even if the machining was top notch, which it is not by Mike's, the material is crap
what is that machine called that they are using from 28:38 - 36:50 ? i have never seen such a cool machine before
gear cutting or hobbing, machine.
@@constantinosschinas4503 thank you :)
checking the keyslot width with a caliper? this is critical. if too wide, the key will rock, and ruin the shaft. shoulld be a light press fit. i didnt see a dial indicator once in this vide ( although i fast forwarded and am open to be corrected). quality job 3 safety job 5.
the guy was using a dial indicator when bashing the work piece with a hard hammer lol while setting it up for cutting the pinion teeth
The old man was using one. It was about a 3 second shot of him using it.
The epitome of workshop cleanliness health and safety.
Jeez, a little coolant sure wouldn't hurt when turning with high speed steel bits. That's how I learned to do it 45 years ago. And just a suggestion; change out of your pyjamas and put on some shoes. Not going to get into the appaling rigging practice of tying knots in chain slings.
did anyone else get nervous when the material was lopsided in the chuck because of the welded on tailstock hole
Flabbergasted yet amazed.
Im 75 now....and i was taught 60 yrs ago....do NOT wear long sleeves when working at a lathe..
Вспомнилась старая поговорка монтажников "при большом строительстве пол метра ни косина" , также и тут с точностью , 😂😂😂😂😂
Я выпал в видео.😂Там наверно штангель один на всю шарагу. У мужика при себе только линейка😆
@@livernaja_kolbasa ещё понравилось как токарь рулеткой отмерил. убрал её и на глаз фломастером сделал риску.
@@ИванычМо-к6й 😂
It is stunning that there are still workers being treated this poorly. PPE is not all that expensive. It is corporate abuse, plain and simple. The owners have no humanity.
It is helpful that this channel demonstrates how cruel the world still is. American industry would be doing the same thing if they could. UNIONS stopped them!
You've raised an important point. Safety and fair treatment of workers should always be a priority. While our machinists might not have all the resources they deserve, they demonstrate resilience and skill in their craft. 🛠️💼 Let's continue advocating for better conditions for all workers! 💪🌟
ну куда ж без тапков-то дырявых по металлической стружке
Great workmanship. But put on some eye and ear protection!!!
29:29 - It looks like a David Brown & Muir gear hobbing machine, Model MT60, manufactured in the late 1960s
In the UK?
@@andrewb2475 Aight! Made in the UK
So many negative comments. I wish I had the skills to do what these guys do with so little money..
So true ! All of the negative commenters would not have have the skill to touch this job believe me i have worked with many know it alls over 35 years in the trade !
Cut a key way with a shaper ? What is a shaper you would be asked ?
They do occasionally use some cutting oil
Safety sandals love the PPE
they actually have electric hoists . how revolutionary. on the other hand remember pakistan is a nuclear power. and this shop is considers higher tech than most i have seen on youtube.
Indeed, innovation comes in many forms! 💡🛠️ Our machinists make the most of what they have, showcasing their resourcefulness and skill. Every shop has its own unique charm! 🌟🔧
So much for cleaning up...!!!
Боюсь представить , если им дадут высокоточные станки и крутую оснастку .
Great people great job ALLAH safe your life ,,,
You are right, it is Allah who takes care of their health and life, because no safety procedures do so
1:44 where he holds up a thumb which is clearly half missing
the accuracy of production is....???
That's amazing!
Absolutely! Our machinists are true masters of their craft, making the impossible seem routine! 🌟🛠️
بسیار کار خوبی بود .
A little oil would help on them WAYS.
Термичка и твердомер,мое почтение 😂😂😂
На самом деле, они еще соблюдают хоть какие то правила. На одном пакистанском заводе я увидел подачу в водяную закалку длинномера горизонтально.
Combinar o bom profissionalismo, a organização, a segurança faz bem vista as indústria á qualquer Pais.
Absolutamente! A combinação de profissionalismo, organização e segurança é fundamental para o sucesso de qualquer indústria, independentemente do país. Nossos mecânicos demonstram habilidades excepcionais nesses aspectos, mostrando que excelência transcende fronteiras! 🌍🛠️👷♂️
Более 40% металла в стружку...😮
Это нормально, заказываешь поковку для делали в 5тн расчетных, а куют круг 7тн, в итоге деталь кольцо весит 2тн, стружку перерабатывают.
Thanks for sharing!
You're welcome! We're glad you enjoyed the video. Stay tuned for more exciting content! 😊👍