FULL TUTORIAL: How to Applique using a Brother Embroidery Machine | Step by Step | Brother PE500
HTML-код
- Опубликовано: 16 июл 2024
- In today's video, I go over the basic supplies needed to make a simple applique on a brother single needle machine. I am using an older Brother PE500 4x4 machine. I demonstrate how to hoop the bodysuit as well as how to float the bodysuit. I go step-by-step from start to finish of completing an appliqued item on the single needle embroidery machine.
If you are new here, I am Ashley and I operate TWO Etsy embroidery shops full time from my home studio. Over 3 years ago, I traded in my RN job and stethoscope to stay home and operate my businesses full time when I could no longer keep up with both! Now I have a beautiful little girl at home with me that keeps me busy alongside my shops.
00:00 Introduction
01:14 Supplies Needed
03:15 Design Overview
05:42 Fabric Prep-Heat N Bond Lite
09:00 Hooping Bodysuit
14:02 Floating Bodysuit
17:27 Loading File to Machine | Getting Machine Ready
19:45 Moving Design in Hoop
20:15 Threading Machine
21:54 Embroider Placement Stitch
23:00 Fabric and Tackdown Stitch
24:32 Remove Hoop and Trim Fabric
28:48 Satin Stitching
35:01 Going Back Stitches | Stop Machine for Thread Break
38:50 Finished Product | Unhoop
40:08 Trimming Threads
41:00 Finished Bodysuit and Exit
Links for supplies:
Heat N Bond Lite: amzn.to/39TlN7t
Embroidery Scissors: amzn.to/3wCOVcP
Sewing Clips: amzn.to/2PQ6dm1
Ironing Pad: amzn.to/3t4OMwt
Over the Door Organizer (Scrap Fabrics): amzn.to/3ewaPHK
MagnaGlide Bobbins (For Multineedles): amzn.to/3eoGc6I
Similar Lightbox: amzn.to/2Ps6xYb
Teflon Sheets: amzn.to/3eS0O6s
Floral Thank You Stickers: amzn.to/336rafC
Plain Thank You Stickers: amzn.to/2QFCQU9
Cute PolyMailers: amzn.to/3gXKTpN
Dymo 4XL Label Printer: amzn.to/2QNz37b
4x6" Refill Labels: amzn.to/3aZ7P4j
Adhesive Spray (KK100) *My recommendation and what I use:
www.gunold.com/item/kk100-eco...
Adhesive Spray (505) *Okay Amazon Alternative (Better deal in larger quantities):
amzn.to/3x2FOkA
Organ Needles (75/11 BallPoint): amzn.to/3x2FOkA
Embroiderer's Helper Placement Tool: allstitch.com/collections/pla...
Stabilizers:
TearAway ROLL: amzn.to/2PFDrVo
PolyMesh PreCuts (6x6, 8x8,, and 10x10): allstitch.com/collections/cut...
Cover-A-Stitch (Iron/Press to inside once shirt is finished:
allstitch.com/collections/cov...
THREAD:
Madeira Thread: allstitch.com/collections/mad...
KingStar Thread: EmbStore.com
MetroPro Thread: Metroemb.com
Blank Suppliers:
ArbBlanks.com
Blanksboutique.com
AJBlanks.com
Lovethatcotton.com
Sanmar.com (For Fleece/Athletic Jackets, Adult Shirts, Caps, etc)
Canva for Graphics:
www.canva.com/join/crt-rmw-bzs
**I may receive a small commission on affiliate links with no extra cost to you. These help me to continue to provide new content.
___________________________________________________________________________
Etsy shops:
CV Kids: www.etsy.com/shop/countryviewkids
CV Monograms (Our nurse shop!): www.etsy.com/shop/countryviewmonograms
Email:
countryviewapparel@gmail.com 
Хобби
![Veeze - F.A.F (ft. Rylo Rodriguez) [Official Music Video]](http://i.ytimg.com/vi/7hlz2S2GmIY/mqdefault.jpg)
Thank you so much for your tutorial! You went though every step thoroughly! A lot of stuff other people skip in tutorials, you covered. Us beginners really
Appreciate that because something people see as common sense, is not so common with us beginners! Thanks again!
Very good video. You made it easy to follow, thank you so much for this video. I can’t wait to try,
You are clearly a professional. Great tutorial, very detailed. I would really struggle with hooping and managing the garnet but you made it look easy. Thank you.
Thank you for sharing your knowledge. I would sincerely appreciate more videos that I can use on my 4 by 4 as I learn to do the applique designs.
I agree! I want to learn more about this size hoop and what is possible for projects❤️
Great tutorial. It's nice to see you go back and do a tutorial on a flatbed machine.
Excellent tutorial. The design looks great, so pretty x
Great detailed instructions. Love your videos.
😁 ABOUT TIME SOMEONE SHOWED A ONE NEEDLE BROTHER MACHINE RECENTLY 👍🥳
Thanks for the idea of using two different kinds of stabilizers!
Thank you so much! I enjoyed your video. It was very informative and I will be checking your playlist for more flatbed machine videos.
I cannot wait to get home from vacation and try out my old "new to me" Brother PE535 waiting for me. I have seven grandkids and plan on doing lots for Christmas gifts. Love this applique!
Have fun!
Awesome tutorial! Thank you.
Great tutorial, Ashley!!!
Thank you for this tutorial. it was very helpful 🙂
Best toutorial I've ever seen on this them. So complete. Thank You!
Very cute!
Thank you! Excellent presentation!
Oh my word that looked like a lot of hard work, glad i have a multi needle, Thanks for tutorial Ashley,
I'm so glad I do as well, so much appreciation to those who use single needle machines!
Just found your video and I thank you very much. I was afraid to attempt applique on my single needle 4 x 4 Brother machine, but you have given me the confidence to try with your excellent step by step tutorial. Thank you once again.
Great instructions! Thank you
I have only found your RUclips channel today. So thank you Ashley for your excellent video. I am very new to machine embroidery and appreciated your help tremendously.
I'm happy to hear it was of help!
Great Tutorial Ashley 😊
I find hooping the garment way more secure especially if it’s an appliqué. And as you do, I always use poly mesh and cutaway. Always gives me excellent results and no puckering.
Thank u so much for this tutorial. Just what I was looking for my 2 granddaughters, ages 3 and 1...😊
Thank you for sharing your video.
Excelente, me encantó , 🙂 gracias por enseñarnos.
Miss seeing your tutorials! Please come back!
I miss doing videos. I'm working on one now and will hopefully be back more soon :)
This was very helpful.Thank you.
Thank you 😊
thank you so much- It was nice & easy- alot of help- Thanks- Palm Springs, CALIF-
Thanks for this video I'm new to embroidery machine and I'm learning a lot of things to help me. For instance I wasn't cutting the thread I was pulling it back up thru
Thank you so much for sharing this. I always wondered how the shirts were done. ❤
thankyou, tutorial was so helpful x
great video.
Excellent video….thank you!
Thank you ❤
The finished product is gorgeous! 😍
Thank you!
How did I miss this?! Thanks for posting this boo! 💖 *takes all the notes* 📝
Always happy to help if you have questions 💖.
@@AshleyMonograms where’s the design from if you don’t mind me asking?
@Paige Brown It's from Embroidery Boutique
CONGRATULATIONS!!!
Awesome
Just found your video, thank you for sharing
I have this machine and now that you taught me how to use it, I’m exited to make some projects. Perhaps you can show how to do small items. Much appreciated. Thank you
Glad you found it helpful! I do hope to do a few small projects with it soon.
This tutorial was indeed helpful to me, u've gained urself another subscriber❤
So glad to find you. I dont know anything and I was gifted this machine. Look forward to learning from you.
I hope this was helpful!
@@AshleyMonograms Very!
Loved this tutorial. You explained everything very well. Don't know if you have a tutorial on how to transfer files to embroidery machine, if not please do so.
Thank you much for taking the time to do these videos for us! I have learned so much! I was wondering if you would share where you purchased your stackable storage bins? I have been trying to reorganize my closet and can’t find any I like. Thank you! Sharon :)
The white bins in my closet that I use for blanks? They were from Walmart about 8-10 years ago. I've unfortunately not found them since 😞
Thank you for this tutorial. I am wanting an embroidery machine but don't know where to start.
I hope this helped. There's a learning curve but so fun!
It was very helpful. Thanks. I am saving up for multi needle machine. Can you do towel monogram on 4×4 hoop thsnkd
You talk nice and slow thank you so much for posting.
Thank you for the Full Tutorial on the Brother PE machine. Ashley, can you possibility do a step by step full tutorial video on how to setup one of your Brother machines you have, from already having a hooped garment on a Mighty Hoop, to setting up the proper setting on the LCD of the machine, where one can find the hoop sizes, where one can find the design size, and how it can be changed if possible, plus tracing, etc. Also can please talk about what one should be aware of when working with the machine, and any suggestions, and tips you can offer. Thank you for any help you can offer via RUclips video for those that have the same machines you have and are just starting out. I sincerely appreciate you, thank you for sharing.
The multineedles are on my list for next! (Both mighty hoops and fast frames).
@@AshleyMonograms HOORAY !!!! Thank You
Thank you so much for this! It’s exactly what I was looking for. What kind of thread do you have to use for the bobbin? Is it embroidery thread or just regular thread? Also are u using a specific embroidery needle?
I specifically use bobbin thread. It is a different weight than embroidery thread. The exact weight of bobbin thread recommended for each machine can vary.
So cute! Does the design include the placement stitch and tack down or do you add that to the design?
The design comes with it! (And most, if not all, purchased applique designs do! )
I make my own baby onesie
Hi! Love your video. When floating the fabric I’m confused why you turn it inside out. Wouldn’t the design be in the shirt then? Thanks!
I have just got a used machine same as the one your currently using in this video and I have not been able to figure out how to use a design I bought off Etsy to embroider on a shirt not sure if you could give me any pointers how to get it going
I have a pe535 and I’m new to this I don’t know if I have a tension issue or the density is wrong but it’s not coming out the way your stitches are
To do home tea shirt printin embroidery which machi best
Awesome tutorial ,thank you for doing this, how do I put a monogram together using the alphabets that came with the machine.thank you. I have a brother
I do not use the built in fonts on the machines. I buy pre-digitized fonts in BX format and set them up in Embrilliance (free version can save fonts from bx fonts!).
This was very helpful, thank you! I'm a total novice at this, what kind of thread does this machine use?
I prefer to use polyester embroidery thread. There are many brands available online, but most will work okay though some are better quality than others.
Hi! thank you for your tutorials! Can you turn your volume up? I appreciate it! thanks!
It should be better with any future videos!
Thanks for the tutorial. Can you please tell me what size niddle are you using?
I just double checked, they are 75/11 Ballpoint (Organ Brand). I updated the description with an Amazon link.
Hi ashley. sorry for ask. can you please, write the name for the spray do you use for the stabilizer, please? i don't see in your list of supplies. Thank you so much for you tutorial. i loved you work.
I missed that on my list, so I just added it. I prefer KK100 by Gunold, it is the cheapest I've found *IF* you have a wholesale account with them. 505 is an okay alternative and easier to find locally or order from Amazon.
I've seen other tutorials that use wash away embroidery stabilizer.. is the heat n bond in replace of it?
The heat n bond is meant to secure the fabric to the garment to help keep it smooth with wash & wear. I would not suggest using wash away stabilizer behind the shirt as a stabilizer but the clear wash away stabilizer that goes on top of the garment can help with cleaner stitching. I personally do not use this often on items without a lot of pile or loft, that's just my preference!
Where can I get this design!? 😍😍
Hi where did you get the desighn it's very nice
It's from embroidery-boutique.com
Did you say you are using silhouette pro as your design space?
I typically use Sew What Pro for my embroidery editing.
The purple item you used. Was that HTV Vinyl?
It was actually a glitter cotton fabric but I do often use Glitter HTV.
Can I use any material for the appliqued part of the design?
Most fabrics will work but cotton is the most common.
What weight poly mesh do you use? And the cut away stabilizer is it a specific weight?
I find they are so stiff , I only use cut away
I use 1.5oz polymesh from Allstitch. I find it much more flexible and thinner than traditional cutaway!
I need help with using this on a crochet project. I made afghans and I'm afraid to use mine on the embroidery machine. I have those same machine and only played around with it when i first got it many hears ago. I now have to learn all over again. Also. I have the scan and cut vinyl machine and I can San my own drawings to it to cut is there a way I can use my own designs on this older one. I know they have came a long way.
There's not a direct way to scan an image to embroider on this machine. It would need to be digitized in software on a computer. There are some newer machines that will auto-digitize drawings, but they are much larger/expensive machines.
Looking for software I can get for this same machine! I’m new and looking for pretty designs! Please help
Just about any software will work, it does not have to be machine specific. I use Sew What Pro (SWP), but Embrilliance Essentials is a more popular and still affordable option. I believe both have free demo versions to try them out before purchasing.
What software are you using?
I used Sew What Pro in this tutorial, that is my favorite but I do also use Embrilliance.
Hi Ashley could you please tell me where this design is from? Thank you. 😊
Hi,
It's from Embroidery-boutique.com
Thank you!😊
Hello, is this machine compatible with Windows 10 OS?
I use it with a windows 10 laptop. It only requires the computer to transfer the design.
How much would you charge for this Onsie? It took a long time.
I took it slow and step by step for the tutorial. On my multineedle it would be less than 20 minutes and I charge a flat rate of $29 for bodysuits/shirts.
Ashley, could you please tell me which side of a female jacket do I put the embroidery name? I will be sewing a bomber jacket for myself and I want to add my name to it. How many inches down from the Neck or shoulder?
I do a logo on the left and name on the right. When there's no logo/icon, I do left side by default unless the customer asks otherwise. I do about 6" +/- down from the shoulder seam.
🧵 I learned a lot from your video, thank you❕🪡