I wish you had more videos on embroidery projects. You have been the easiest to understand and are excellent at step by step instructions for first timers! Thank you! Peace!
I am so glad I found you. By watching your videos I loaded a bobbin, threaded a needle, and made my very first embroidery design on a shirt!!! Thank you. Now I'm going to go look and see if you have one on how to make patches.
Totally enjoyed your video! You are so easy to follow and under stand. Be sure to keep sharing with us. Loving your pretty Kitty. I will definitely watch your other videos! I love that young men are embroidering!
Thank you for this video Dane! The fact that you added the needle issue in your video made me look at mine even though it wasn’t broken. That was the issue (it was bent), even though the error kept telling me it was the upper threading. I was going a little nuts!
Thanks, Dane. Reading the manual didn't really provide me the necessary understanding of how to return to a previous stitching sequence. Visually watching your steps allowed me to tamper with the +/- stitch keys. I completely removed my hoop and reattached it, then I had to return to the 3rd stitch sequence of my design, so I used the +100 until the needle aligned back to the location that needed rework and it completed nicely.
Omg this month I’ve had my embroidery machine for two years! I basically didn’t learn anything from the other creators so it’s been sitting! 🗣️WHERE HAVE YOU BEEN CAUSE I LEARNED IN 1 DAY 🙌🏽.. Thank you, I’m super excited 🎉
Important tip when u rethread is to always cut ur thread at the spool and pull out ur threaded thread from the needle downward not upwards! As that can cause problems with ur tension disks. Always downward not upward. 🎉
Dude! I freaking love you! You’re the boss. Thank you for popping up in my feed because I have this big machine and am terrified to do embroidery. But you make it look so doable. Your help will be my first project in 2024. ❤❤❤❤❤
You really shouldn’t back your thread out of the tension disc that way. I suggest cutting the thread at the top and pulling it out down toward the needle. Reversing the direction could damage your timing. Nice to see a young man sewing.
I tried to do the car in the teacup last night. My frame popped off right when it started the kitties ears so I gave up. Now, that I watched your video I know how to do it. Thank you. Will check out your other videos. My black cat Poppy says “Hi” to your boy. Bean 😊😊😊
HAH! I just left a comment on your threading video and found this...your videos are EPIC brother! I have not had a fail like that thankfully, but thanks to you? Now I'll know exactly how to handle it. I would never have thought to go back.
Brother needs to pay you!!!! I have the LB5000 and these vids by you are actually helping me because I can’t really find many vids for my model bless you!! And showing where to start again if messed up…. Beautiful 🤌🏽
So you don't have to change out the bottom bobbin for every color?? I've been swapping them each time.. Would white just be used as a default color for the bottom? Very helpful video, thank you!
This is by far the best video I have seen on emboidery, you made it so simple. How would I use designs other than those built into the machine, and will I have to purchase software or any other add ons.
Luv that machine….the only thing I would add to it is that when changing thread, cut it from the top and pull it out from the needle….it prevents dragging thread lint through the tension disks…..sew much fun…thanks for sharing….✂️🧵
So enjoyed your video. You made it exciting and you showcased your cat, how cute 🥰 Thank you so much. Have you ever used different designs from a USB 🎉
Hi, Ty for sharing. I’m still running into difficulties and maybe you have more insight into it. As long as I don’t change the thread, the front and back of the embroidery is perfect. When I change the colors, I have looping on the back and the upper bobbin ends up bunched up inside where the needle drops into the machine and into the lower bobbin. Any suggestions?
yeah, try to make sure your hoop is tight as possible, also re thread bobbin after color change. its not mandatory but it helps in that exact situation.
Would you know how to group colors together. My machine se600 has me changing 8 colors 120 times because it chooses to sew in sections instead of each color at a time. Keep in mind I did separate the colors in inkstitch.
Learned a lot from this video & your tips and tricks video. I have a 3 color design & on my second color the design is off centered a little bit. Any fix for this?
Hi im really liking your videos. Makes it less intimidating. But i suggest you use some dollar tree tweezers instead of the scissor to catch the thread😊
Great video, I enjoyed your cat! My first time starting a trial, the machine went bonkers, loud noises, I paniced. The needle busted, I turned off the machine. Now I know how to lose my design placement. Thank you for your needle breakage, I will not panic next time. I can now thread and choose my colors:)
this is probably a silly question, but I am new to this world, what type of thread are you using and do you use the same type for an embroidery design and the words you are doing?
Are you opening the design in software? That often changes the design. Simply extract files from zipped folder, choose files for your machine, transfer to usb then transfer to your machine. Hopefully this fixes your issue.
HAHAHAH NICE!! cant wait to see how yours turn out fam. newest video on my page is a tutorial for getting your own design onto the machine , which you will need to do if you wanna do your own band shirts . make sure you check it out fam.
I wish you had more videos on embroidery projects. You have been the easiest to understand and are excellent at step by step instructions for first timers! Thank you! Peace!
Facts, make sum more bruh
I am so glad I found you. By watching your videos I loaded a bobbin, threaded a needle, and made my very first embroidery design on a shirt!!! Thank you. Now I'm going to go look and see if you have one on how to make patches.
Totally enjoyed your video! You are so easy to follow and under stand. Be sure to keep sharing with us. Loving your pretty Kitty. I will definitely watch your other videos! I love that young men are embroidering!
I'm 64yrs young and just bought the He-1. Thanks for the tips. Never done this before
Thanks for including the failure. I was able to resume a project when my shirt got caught!
Thank you for this video Dane! The fact that you added the needle issue in your video made me look at mine even though it wasn’t broken. That was the issue (it was bent), even though the error kept telling me it was the upper threading. I was going a little nuts!
Simply put…. YOU ROCK!!! Thank you!!!
Dane! You rock!! Keep up the good work ❣️👏💥
Adding the unplanned, oopsies, is a great way to teach, because it is great to teach how to overcome that oopsie moment. Awesome vid. Thank you.
Absolutely! glad you liked it
Thank you for this, it was exactly the information I was looking for. I can only stare at that manual so long before going cross eyed.
Thanks, Dane. Reading the manual didn't really provide me the necessary understanding of how to return to a previous stitching sequence. Visually watching your steps allowed me to tamper with the +/- stitch keys. I completely removed my hoop and reattached it, then I had to return to the 3rd stitch sequence of my design, so I used the +100 until the needle aligned back to the location that needed rework and it completed nicely.
Omg this month I’ve had my embroidery machine for two years! I basically didn’t learn anything from the other creators so it’s been sitting! 🗣️WHERE HAVE YOU BEEN CAUSE I LEARNED IN 1 DAY 🙌🏽.. Thank you, I’m super excited 🎉
Same😅
You're av great teacher! Thank you, Sir 🌟
You're very welcome! check out the new video for importing designs
I learned a lot; thanks for all the added hints
Important tip when u rethread is to always cut ur thread at the spool and pull out ur threaded thread from the needle downward not upwards! As that can cause problems with ur tension disks. Always downward not upward. 🎉
Dude! I freaking love you! You’re the boss. Thank you for popping up in my feed because I have this big machine and am terrified to do embroidery. But you make it look so doable. Your help will be my first project in 2024. ❤❤❤❤❤
You really shouldn’t back your thread out of the tension disc that way. I suggest cutting the thread at the top and pulling it out down toward the needle. Reversing the direction could damage your timing. Nice to see a young man sewing.
Yes and the thread change should always be done with presser foot up. Good video though
I bought a Brother a few years ago and have been too afraid to use it. I’m hoping your videos will help me.
I tried to do the car in the teacup last night. My frame popped off right when it started the kitties ears so I gave up. Now, that I watched your video I know how to do it. Thank you.
Will check out your other videos.
My black cat Poppy says “Hi” to your boy. Bean 😊😊😊
Excellent content bro keep it coming
Such an amazing job on the finished results!! 🤩✨
Thank you for posting this video. I am just starting to learn my new Brother SE630. This was so much help. Love Mr. Bean.
Awesome teaching great videos you’ve really helped me learn to use my machine thank you !!!!
if you are looking for custom designs check out my newest video, its a step by step to upload custom stuff !
haha- i’m working on the same design (my first design that’s not words) so awesome you don’t have to change the bobbin. yay
You don’t change the bobbin when changing colors? Thank you for your videos! i just bought my machine
Generally no. The underside is assumed to not show, so plain white bobbin thread for the whole thing.
Getting mine thanks for the tutorial
HAH! I just left a comment on your threading video and found this...your videos are EPIC brother! I have not had a fail like that thankfully, but thanks to you? Now I'll know exactly how to handle it. I would never have thought to go back.
I bought ase725 so I can makes Xmas gifts. Thanks for details. Any inside tips on the 725
Love this video. You explained things very well. Would you make a video on how to use the 4x6 hoop?
I agree !!!
Thanks for detailed video.
This was really awesome. Learnt a lot
Thank you , so easy to understand...❤
This was an amazing video. Thank you so much 😊
perfect, thank you for making this video!
of course 🫱🏼🫲🏾👍🏽
Pls do more vids on embroidery you actually go into detail unlike most people on here 😭
thank u ur videos help me so much !
I love u thanks for ur clear explanations
Very helpful…. Thank you 😊
Can the se600 embroidery on sleeves? Can you use different hoops like a smaller size? Also can the se600 do curve designs?
Very helpful! Thank you!
Do you change the bobbin color too? Or can you leave it just white?
u helped me so much... and I have the same cat mug!
Brother needs to pay you!!!! I have the LB5000 and these vids by you are actually helping me because I can’t really find many vids for my model bless you!! And showing where to start again if messed up…. Beautiful 🤌🏽
love your kitty
So you don't have to change out the bottom bobbin for every color?? I've been swapping them each time.. Would white just be used as a default color for the bottom? Very helpful video, thank you!
yes, no need to swap bobbin, but re thread it each time just to be sure :)
This is so helpful but question, don’t you have to change the bobbin too?
Dude you’re so great at giving simple instructions!!!! #broideringbruhs
I appreciate that! 😅
Great video. Thank you.
Thanks. Thanks. Thanks. You are so kind !!
Awesome video 😊
This is by far the best video I have seen on emboidery, you made it so simple. How would I use designs other than those built into the machine, and will I have to purchase software or any other add ons.
You’re awesome 👏
Hey! Do you think this machine will work for starting a new small biz?
Thankyou for the help! what type of needle should we use? the ballpoint?
Luv that machine….the only thing I would add to it is that when changing thread, cut it from the top and pull it out from the needle….it prevents dragging thread lint through the tension disks…..sew much fun…thanks for sharing….✂️🧵
Can you make more videos you’ve taught me so much already
Do you need to add an adhesive to the stabilizer and shirt or is the hoop good enough?
So enjoyed your video.
You made it exciting and you showcased your cat, how cute 🥰
Thank you so much. Have you ever used different designs from a USB 🎉
Some tips to threading ALWAYS thread your machine with the presser foot UP and always unthread by pulling your thread through the needle!!
That Knuckle Puck shirt thooo
gonna wear a front bottoms shirt next video lol
Hi, Ty for sharing. I’m still running into difficulties and maybe you have more insight into it. As long as I don’t change the thread, the front and back of the embroidery is perfect. When I change the colors, I have looping on the back and the upper bobbin ends up bunched up inside where the needle drops into the machine and into the lower bobbin. Any suggestions?
yeah, try to make sure your hoop is tight as possible, also re thread bobbin after color change. its not mandatory but it helps in that exact situation.
Thank you so much 👍🏻
Would you know how to group colors together. My machine se600 has me changing 8 colors 120 times because it chooses to sew in sections instead of each color at a time. Keep in mind I did separate the colors in inkstitch.
These videos are so helpful! What type of thread do you use/recommend? And how do you embroider your own designs (not the pre-programmed ones)?
You need to put the file designs on a usb stick and put in the side of the machine
@@devioustrip5728 thank you!!🙏🏻
Learned a lot from this video & your tips and tricks video. I have a 3 color design & on my second color the design is off centered a little bit. Any fix for this?
If black what the color you were using for step 1, 5, 7, & 8 can you skip over steps to do all those at one time?
Bring more vid's dude.
i just dropped a music video 😎👍🏽
Do you ever have the thread fray when doing projects, and if so how do you fix that , please.
If the thread frays it’s generally because of the needle. Use an embroidery needle.
I have an issue with alignment (spaces between outlines and coloring in) and my bobbin color showing through. any advice?
Hi im really liking your videos. Makes it less intimidating. But i suggest you use some dollar tree tweezers instead of the scissor to catch the thread😊
Great video, I enjoyed your cat! My first time starting a trial, the machine went bonkers, loud noises, I paniced. The needle busted, I turned off the machine. Now I know how to lose my design placement. Thank you for your needle breakage, I will not panic next time. I can now thread and choose my colors:)
What kinda software do you use to embroid words like?
Does the bobbin thread have to match the top thread?
Have changed needles and use embroidery machine needles but still have that problem, even tried special embroidery thread . Nothing changed !
Does the machine cut the thread automatically when finish with a color? Or do you have to press the scissors button?
Which kind f fot do you like the plastick one Ra metal feet?
cool
Do you have to switch the bobbin?
What brand of threads are you using?
Can I move manuelle to the next color?
Hi, Where can I get the hoops?
this is probably a silly question, but I am new to this world, what type of thread are you using and do you use the same type for an embroidery design and the words you are doing?
Seen a few videos and all the bobbin thread is white, does that mean the bobbin thread never shows up on the surface?
Right, if bobbin thread peeks through to the top, loosen top tension just a little.
Can you add you own logo to the machine
Specifically what kind of pellon did you use on this?
Hey im noticed that with most of my designs. It skips colors and design. Any way to fix that. Also i did 1 where it stiched on top one of another
Are you opening the design in software? That often changes the design. Simply extract files from zipped folder, choose files for your machine, transfer to usb then transfer to your machine. Hopefully this fixes your issue.
Wait you don’t have to change the bobbin?
Did you freaking embroider that knuckle puck shirt? You may be my future self. I’m literally here to buy a machine then make my own band shirts.
HAHAHAH NICE!! cant wait to see how yours turn out fam. newest video on my page is a tutorial for getting your own design onto the machine , which you will need to do if you wanna do your own band shirts . make sure you check it out fam.
@0:28 this video is brought to you by Honey Nut O's. Why pay more for the O.
Get the hell off me lol