Finally REBUILDING the AE86 rear end! Rough Surprise
HTML-код
- Опубликовано: 28 июн 2024
- after owning this AE86 for over 4 years I have finally decided to rebuild the rear end bearings. I'm attempting to make it much more quiet as its very loud while driving. I repainted the rear axle too, but run into some unexpected surprises.
- Авто/Мото
Comment below what you would like to see more videos of next!
So much work man! I didn't want to mess with my diff so I brought my third member to a local race prep shop to rebuild, @ramseyraceprep in Houston. Basically almost replaced everything kaaz 1.5, weir 4.3 gear set, weir solid pinion spacer, and koyo bearings/seal. I would def recommend the weir 4.3 ring and pinion (around $400 shipped)... mine was sorta worn and it was making a bit of noise... but after replacing, its definitely more quiet and oddly enough the car doesn't vibrate as much over 70mph.
@@DanhPhan thanks for the info man! Do you still have rear end noise ? You said “more quiet” also did you have anything checked with 4 link to adjust pinion angle or was the rebuild all it took ? Good to know on the weir stuff I was kinda hesitant on that vs oem and the price almost doubles with Toyota stuff
@@alexander_ford_ my 4-link was dialed in for pinion angle before the diff rebuild. it's definitely quieter than before... there was a little whine. i've also replaced the axles with panic ones as well... so check your axle bearings too. most guys i know go the weir route for a bulletproof rear end... but not many drive their ae86s daily.
this is on the stock zenki lsd rear end before rebuild ruclips.net/video/XcX2JTRnc3Y/видео.html
@@alexander_ford_ this is after the diff rebuild ruclips.net/video/eBlxTMrl74k/видео.html
25 ton press. Geeez, I have a 12 ton press that's worked for everything I've ever needed. Wild.
@@Just_a_space_cowboy 12 might have done it, who knows. All I know is I defiantly wasn’t able to do it in the garage
@alexander_ford_ based on how long it struggled in that video with the 25 ton, I doubt my 12 ton press would have done it. It's nice to have friends like that!
Was gonna ask if you replaced the ring and pinion gears. I’ve never been in an 86 with a gts rear end that hasn’t made noise.
I even had a driveline shop professionally rebuild one. New bearings gears and seals and it still whined…
Was hoping you had better luck than me!
@@MarcusMatthews-l4p yeah that is what scares me man, same happened with David. My coupe and sons coupe are both completely quiet . Worried I’ll throw tons of money at it and never make it quiet