I think my phone knows I've been talking about this! I have the 78inch piston drive extreme. Have had it a few years now and it's an absolute animal and is heavy built. I've done things with it that would shock most people. If you can get to two side of a tree a 20 inch tree will come down!
What good is cutting woody brush if it leaves jagged stobs above the ground? All I see is a future filled with flat tires, and/or livestock with punctured feet. It looks to cut very well, but being able to cut it below the ground is what is needed.
Our Standard Duty Brush Cutter comes with a 60" or 72" mowing deck. It features a 30HP gear box and stump jumper. A flow of 11-20 gpm is required. You can also get it as a open front. Click here to see them. They are the first sets of brush cutters on that page, Thanks. www.cidattachments.com/xtreme_brush_cutter.html
I think yours requires 22 GPM hydraulic flow, so you would need the X-treme brush cutter which can be viewed here. cidattachments.com/product/x-treme-skid-steer-brush-cutter-attachment
I your going to EFFECTIVELY run a brush cutter having enough HP to run a HI-FLOW is the difference between 3 acres a day and 12 acres a day! I burned a full days worth of fuel on my T190 to to chop 3 acres of brush. I upgraded and the dealer is telling my I can cover the remaining 12 acres in less than 1 day. we shall see!
Yeah your dealer bull shitted you too. If you're talking about mowing grass and weeds with a 100 hp tractor and 15 ft. bat wing, yeah. but 12 acres of brush and saplings with a skid steer in less than a day... no sir.
Dont buy the cid, Ok cutter but when its time to change blades you will feel stupid like me for buying one. They have welded the blade bolts to the carrier. Mine was ruined and they want do a thing about it
These machines make lots noise. Mr Bunny can hear long before before chop suwee arrives. Can’t say the same for a fox , coyote or eagle who eat all the rabbits and never give notice.
I think my phone knows I've been talking about this! I have the 78inch piston drive extreme. Have had it a few years now and it's an absolute animal and is heavy built. I've done things with it that would shock most people. If you can get to two side of a tree a 20 inch tree will come down!
I just bought the 72" Severe Duty. CID makes good equipment, they need more videos up.
Thanks more relaxing to watch than it should be :D
What good is cutting woody brush if it leaves jagged stobs above the ground? All I see is a future filled with flat tires, and/or livestock with punctured feet. It looks to cut very well, but being able to cut it below the ground is what is needed.
Huge improvement.keeping up.
I wonder if you raise up the knife plate to near 90 degree and keep going ahead , what will happen?
It's great for small machines. Cute
It’s all good to clear that stuff but you better spray that whole area with pathway afterwards
Hi I own a caterpillar 226 with 15.1gpm
Would this operate correctly
No
Do you make a Skid Steer Brush Cutter Attachment with a low-flow? My flo is about 12 gpm when the tractor was new
Our Standard Duty Brush Cutter comes with a 60" or 72" mowing deck. It features a 30HP gear box and stump jumper. A flow of 11-20 gpm is required. You can also get it as a open front. Click here to see them. They are the first sets of brush cutters on that page, Thanks. www.cidattachments.com/xtreme_brush_cutter.html
I want it. Lol.... hmmm I'll have to see if my cat 257 can run that.
I think yours requires 22 GPM hydraulic flow, so you would need the X-treme brush cutter which can be viewed here. cidattachments.com/product/x-treme-skid-steer-brush-cutter-attachment
Queria ter ter um brinquedinho deste
I your going to EFFECTIVELY run a brush cutter having enough HP to run a HI-FLOW is the difference between 3 acres a day and 12 acres a day! I burned a full days worth of fuel on my T190 to to chop 3 acres of brush. I upgraded and the dealer is telling my I can cover the remaining 12 acres in less than 1 day. we shall see!
Yeah your dealer bull shitted you too. If you're talking about mowing grass and weeds with a 100 hp tractor and 15 ft. bat wing, yeah. but 12 acres of brush and saplings with a skid steer in less than a day... no sir.
Karl K se
Seems a bit underpowered.
We carry a piston cutter also which is more powerful! ruclips.net/video/vvhqN40fSEc/видео.htmlm5s
Construction Implements Depot 336-859-2002 how does the piston version have more power?
Dont buy the cid, Ok cutter but when its time to change blades you will feel stupid like me for buying one. They have welded the blade bolts to the carrier. Mine was ruined and they want do a thing about it
bunny killer
Phil G
Bunny skinner!
These machines make lots noise. Mr Bunny can hear long before before chop suwee arrives. Can’t say the same for a fox , coyote or eagle who eat all the rabbits and never give notice.
Bunnies tend to hunker down and wait for the inevitable chop chop.
At least that's the case when I use my finish mower.
Phil G l
seems weak
Cutting big grass and bushes its ok but to mulch the young grown trees I think you should have used *Brush Busters 131448 010 413 SPED UP.*