I noticed there was a pressure gauge on the unit facing the operator, looks like you can adjust what you are doing according to what kind of pressure you currently have on the hydro system. The blades are kind of stubby, swivel on a very large and very heavy flywheel, stores a lot of energy. Once it's spinning there is pretty much nothing that is going to slow it down much.
pcdubya it’s close. It would be a good thing to have if the property was mostly brush. If was over grown with a mix of sampling and small trees the forestry mulcher would be a much better option. I would bring both to a job.
You must have went hard on your resurch bc I haven't seen a video yet that the machine and mulcher work together at all mulcher always to much for machine. This your just cruising threw stuff big stuff great job
Hey guys I had something interesting happen today, every year I rent a T-650 Bobcat with a Diamond 72" brush cutter to work on CRP land every year I get the same Diamond cutter but this year since they are a Bobcat dealer they were going to give me a BrushCat instead? OK I know nothing about the BrushCat but was sure willing to give it a try. Well as it turned out the only Brush cutter they had that I could use was the old Diamond, I could see it hadn't been used for awhile I am guessing since they are pushing Bobcat products ie. BrushCat. So I was at the dealership signing the rental papers and I commented on how much I love running the Diamond cutter and what a great job it has done for me over the years, I then asked the sales fellow how the BrushCat stacks up against the Diamond and his answer surprised me greatly, he stated that the Diamond was in a completely different class of cutter limited to 3" MAXIMUM diameter brush and your pushing it with that and the Diamond is darned near ready to cut down trees! I wont tell anymore because this is a great dealer and I use them for a lot of services but with THAT said I am sure glad I ended up with old reliable, I have 15 acres of heavy brush to get rid of tomorrow!!!
Incredible!! The Kubota skid machine must have a huge power take off the front to handle this heavy brush cutter. Does a remarkable job of knocking bush/weeds down. Have seen pros use a zero turn mower for similar work, but this skid machine/brush hog does it better.
We we recently bought this cutter but I was wonder where do y’all connect the safety chain to the machine? Or if y’all even use it at all. I’ve read different opinions on using a the chain in several forums.
Much lower maint. cost, no expensive teeth to replace[ drum- 32-40, big disc - ?, but many! If this is what i think it is it only has 3 or 4 blades, sharp on both sides, which can counter rotate when you want. a much more sensible set up for sure !!! does a kick ass job for much lowar and simpler maint. upkeep! 🎯💯🥳🤠
MZARIMI well from my understanding you can’t use a brush cutter on large trees 8-12 inch diameter trees that is. If they are around the 3-6 maybe, this is great for heavy brush and likes but can’t handle what mulcher heads do. I’ve seen the drum style on skid steers take on 8-10 inch trees I would never think to even attempt that with a brush cutter.
@@charlesthorpe3179 You bet, here's a video of the Blue Diamond extreme duty (standard flow) ruclips.net/video/IBOCJ-3uEJI/видео.html We would also direct you to watch our video of the Skid Pro extreme duty (standard flow) ruclips.net/video/K4yPPanzQlI/видео.html
I actually run a low flow extreme duty. I've been very pleased with the results and reliability. I'm considering a new skidsteer (high flow) and the severe duty. I appreciate the information.
The Blue Diamond brush cutter looks like a beast! Swift Fox Industries always showcasing impressive gear. Can't wait to see it in action!
Man, that skid loader is pushing some serious horsepower and flow rate, too! That thing would make trailbuilding and maintenance so darn easy!
Hey sweetie I’m gonna I wanna I was wondering what you gonna have w I we will work on with ya tomorrow night and get it home and I will
sorry for your getting out to your moms phone call me
I noticed there was a pressure gauge on the unit facing the operator, looks like you can adjust what you are doing according to what kind of pressure you currently have on the hydro system. The blades are kind of stubby, swivel on a very large and very heavy flywheel, stores a lot of energy. Once it's spinning there is pretty much nothing that is going to slow it down much.
Am i the only one who has no land and no use for this but wants one
Lol same I’m not even a adult and I watch this only for the satisfaction and just to get when I have land
Mee too 🤣🤣
Could go the custom work route
Good😊
Yes I want one also I’ll find ways to use it
Killer setup, that thing looks like it equals a mulching head. Love to have it for a weekend.
pcdubya it’s close. It would be a good thing to have if the property was mostly brush. If was over grown with a mix of sampling and small trees the forestry mulcher would be a much better option. I would bring both to a job.
Maaan, I could REALLY use one of these machines and the RESULTS are very IMPRESSIVE!!!👏🏾👏🏾👏🏾💪🏾👌🏾👍🏾❤💯
You could probably rent one local, I have seen them here before for rent
@@briangreer6016 Indeed, you right and I've checked with them.👌🏾👍🏾
2:00 oh my god I had no idea you can do that with a brush hog!😧
Fantastic where can I get one do they have a catalog how big in diameter trees can it handle thanks for ur time cleared that big brush quickly
Currently my favorite video on the internet. MUST TURN VOLUME UP!!!!!!!
Very good mechine, good working, and strong KUBOTA. Good operator...
Very nice Andrew Camarata would definitely love to see this..
95hp driving that mower🥳
@clyddrixx he already has 1 lol
He did
he got that orange thingee
that does work like that lol
He doesn’t do real work anymore. Just screws around on his property.
Very impressive attachment.
You must have went hard on your resurch bc I haven't seen a video yet that the machine and mulcher work together at all mulcher always to much for machine. This your just cruising threw stuff big stuff great job
Yes and I have wanted a Lynx full length coat 2x my size for all my life…( to the first comment) 🤣Love this guy and his giant boy toys 🥰👍
Hey guys I had something interesting happen today, every year I rent a T-650 Bobcat with a Diamond 72" brush cutter to work on CRP land every year I get the same Diamond cutter but this year since they are a Bobcat dealer they were going to give me a BrushCat instead? OK I know nothing about the BrushCat but was sure willing to give it a try. Well as it turned out the only Brush cutter they had that I could use was the old Diamond, I could see it hadn't been used for awhile I am guessing since they are pushing Bobcat products ie. BrushCat. So I was at the dealership signing the rental papers and I commented on how much I love running the Diamond cutter and what a great job it has done for me over the years, I then asked the sales fellow how the BrushCat stacks up against the Diamond and his answer surprised me greatly, he stated that the Diamond was in a completely different class of cutter limited to 3" MAXIMUM diameter brush and your pushing it with that and the Diamond is darned near ready to cut down trees! I wont tell anymore because this is a great dealer and I use them for a lot of services but with THAT said I am sure glad I ended up with old reliable, I have 15 acres of heavy brush to get rid of tomorrow!!!
I also run the Blue Diamond and it works just as advertised!!
I know one thing I'm buying when I hit the lotto!!
Good luck bro
Sa mund te kushtoj kjo makineri?
I'm starting to look for a rental
Great machine but did someone have to go through the site and make sure there was no rocks or metal objects laying around the site?
This is a beast of a bush cutter! This will save us hours of manual work in our farms in Africa :) How much does it cost to buy this machine, please ?
It sells for about $1,200 before inflation
Incredible!! The Kubota skid machine must have a huge power take off the front to handle this heavy brush cutter. Does a remarkable job of knocking bush/weeds down. Have seen pros use a zero turn mower for similar work, but this skid machine/brush hog does it better.
High and low flow hydro hookups on the arm. Low flow for actuating arms and clamps etc, high flow for running things that spin up fast.
a zero turn mower lmfao , your a clown
Great equipment, but could have shown the cutting blade.
Thanks for posting!
Nice demo but does the manufacturer tell you the cost of maintenance on these things. I know the answer. Do you?
Essa máquina ai e excelente pra roça
Pasto quanto custa uma máquina dessas com esse implemento
Can give price this equipment,
That's an amazing cutter....
I have several acres of willow thickets. Drop one of those bad boys off at my farm please!
Broke Miner where you at I have one you can use
Jaydeon Haddell I’m located in Northwest Iowa a couple miles from Spencer.
Broke Miner you have instagram So I get you address
Jaydeon Haddell yes but just opened it not long ago and not real familiar with it. brokeminer if you can search it.
Jaydeon Haddell The farm address is 3555 260th Ave. Spencer, IA. I don’t mind giving that out if you want cell better use Instagram.
Looks like a armoured samurai with a katana🔥🔥🔥
Admin , mesin pemotong rumput dan semak belukar merk KUBOTA ini sudah ada di jualkah di Indonesia ?
di mana alamat nya
The 120 ASV with a FECON head still looks like the best to me!
Booker Uzzell not even the same comparison. Also, Cimaf is superior to fecon in the mulching head game.
What happens when you hit a boulder/rock sticking out of the ground?
We we recently bought this cutter but I was wonder where do y’all connect the safety chain to the machine? Or if y’all even use it at all. I’ve read different opinions on using a the chain in several forums.
Attach the chain to one of the tie downs on the front of your skid steer.
I like this machine!
If Andrew Camarata saw this, he would have one next week, especially when you consider what he does with the one he has.
Note only him,
I am even more eagerly interested than him.
Very amazing product for my forest job
Where can I buy one of these and how much will it cost me??
If I want to buy it what would be its price and whom should I consult in India?
Amazing machine
RIP for the trees, how many carbon release
Much lower maint. cost, no expensive teeth to replace[ drum- 32-40, big
disc - ?, but many!
If this is what i think it is
it only has 3 or 4 blades, sharp on both sides, which can counter rotate when you want. a much more sensible set up for sure !!! does a kick ass job for much lowar and simpler maint. upkeep! 🎯💯🥳🤠
I like this machine..whre i can buy it..?
Complex machine: engine, the track propulsion system, the mower, the arms that move the mower up and down and tilt.
Well damn 😳color me impressed you can really fu*k up some brush with that beast of a cutter.
Is this for real ? wonder how much one of this machines selling for ?
I loved mine.
Very nice 👍.. what size machine is that ?
Definitely svl95.
Love watching this!! Cool!
If we had those in Vietnam.....we could have won the war....
Looks like it would have definitely helped out I know a couple of streets that could use one
David Broussard, you served in Vietnam? Thank you very much! God bless you real well!
You did win the war in Vietnam, it was the politicians that lost it. Thank you for your service.
As a brit I'm impressed with that machine
That is one fantastic machine
Witam serdecznie potrzebuje pomocy w doborze hydromitoru do podobnej tarczy do ścinki cienkich drzew, jaki jest zastosowany w tej maszynie?
How much this equipment?
Cual es el costo de esta maquinaria y si lo pueden enviar al Sureste Mexicano...
Nice machine. 👍👍👍
What will happen,if the blade hit stone ?
Hello, can i buy that machine.. send to Indonesia
Is this available in India?
holy shit that thing kicks ass!
That's a beast
Cunto e o valor dessa maquina
Make sure your machine is a high flow...........
What different between forestry mulching cutter?
MZARIMI well from my understanding you can’t use a brush cutter on large trees 8-12 inch diameter trees that is. If they are around the 3-6 maybe, this is great for heavy brush and likes but can’t handle what mulcher heads do. I’ve seen the drum style on skid steers take on 8-10 inch trees I would never think to even attempt that with a brush cutter.
10 grand and 10 inches of material capacity.
Hi sir so we can buy in India also this one ...
How long to clear 1 acre?
Beli ini dmna om?
Very impressive machine.
HOLY SHIT. THAT THING IS A BEEEAAAAST!!!!
Order mesin?
Is this a high flow version?
Yes, it's high flow.
@@SwiftFoxIndustries is the low flow comparable? Or do you have videos of it in operation?
@@charlesthorpe3179
You bet, here's a video of the Blue Diamond extreme duty (standard flow) ruclips.net/video/IBOCJ-3uEJI/видео.html
We would also direct you to watch our video of the Skid Pro extreme duty (standard flow)
ruclips.net/video/K4yPPanzQlI/видео.html
I actually run a low flow extreme duty. I've been very pleased with the results and reliability.
I'm considering a new skidsteer (high flow) and the severe duty. I appreciate the information.
Como se llama, la máquina o el accesorio que destruye la maleza
thanks for sharing
This thing is amazing, it is absolutely destroying saplings and mature trees.
Dan juga untuk rawa gambut
Warum machst du die ganzen birikinweg
Good job ... 👍
I have yet to see anybody jump into a field full of mesquite trees with one of those, but Id sure like too.
Would probably break
Alat yang super canggih,, Indonesia hadir, semangat terus 💪💪💪
beli di mana bos
Good job 👍🏻👍🏻👍🏻💪🏻
I will find a reason to rent this… I must.
Si me pueden ayudar por favor costo de la máquina y envío para Perú pucallpa
What tree?
Where can I rent one of those I live in Texas
Try Southern Plains Equipment in San Antonio
Sunbelt rentals
My neighbor needs this
地下の根っこまでも粉砕してー 第一段階ですね 次は拔根ですね
Mendesain mana harga nya berapa separonya ada gak
Sperpat nya mudah di dapat gak kadang aneh2 kayak bering sel gak standar indonesia
Genial quiero una 😂🎉
God job 👍👍👍
We could have used a few 100 of those in South Vietnam, then the body count would have a lot higher.
John Moore 😂
Sí sí la máquina es muy buena y déjame un camino pero parece que no hay piedra en ese monte no hay no muchísimas gracias
Brp harga
malaysia x de k???
Berapa ya harga traktor ini untuk sampai di Indonesia?
Kalau ada pasti laris khususnya di pulau kami Kalimantan
You had me at Severe Duty
Nice you automatically buy into the marketing wank and buzz words.
좋아요~!
Awesome
wow amazing.....
I want one
2:00 wtf
This machine could take out a whole Forrest in 6 hours 💀
👍👍👍
Awesome! ! I want to try it too
Hang in there