Beautiful AND very functional. Only thing I would add would be a 1" (25mm) lip on the edge of the shelves on the side to help keep the glue bottles and spray paint cans from falling off.
This is a pretty solid little workbench. While once you figure out how it comes together, it is physically Easy to assemble ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh by yourself. But the diagrams explaining the steps are really pretty bad. I could not get the handle pins in all the way despite multiple attempts, so I just used a screw I had on hand for the 2nd handle. I could not get the first pin in further or pull it back out. You are supposed to hammer it in, but I had no leverage and the handle is plastic and I did not want to risk breaking it. I will get a lot of use out of the bench because of the convenient size and height. It does fold up nicely for storage. They even explain how to fold it so you don't get pinched...that is important!
I see one problem with this. If you are working on something, and have stuff on top, but you need something inside. It’s a good idea but you better get everything you need before you start.
Oo nga sir. Actually hindi naman table yung dati. Lumang patungan ng TV lang yun na nilagyan ko ng Plyboard sa taas para magmukhang working table. Finally nagawan ko na rin ng maayos na workbench at the same time lagayan ko na rin ng mga tools ko.
Definition of love will change with how much experiences you have…..the older you are the more you realize your initial definition of love is not love but admiration….your initial love definition is the thought of what you’ll get from your partner when you have her/him..more like a trophy….but eventually you’ll found out that definition of love is not what you’ll get from your partner but what WILL you DO/GIVE to your partner…for example your life etc. *sorry not a native english speaker 🥲
... ang galing mo bro... sa lahat ng na napanood kong DIY DRAWER.. sayo ang pinaka informative at madaling sundan... ano nga pala ang sukat ng gamit mong screw/turnilyo ??
Thank you Sir Iba iba po sukat ng mga screw na ginagamit ko. Yung screw na ginamit ko sa 2x4 na kahoy, 2.5” screw ang ginamit ko. Pag sa 3/4 plywood na nka pockethole, 1.25” screw naman gamit ko. Pero pag hindi nka pockethole yung 3/4 plywood, 1.5” naman na screw gamit ko.
Thank you 😊 Sir Ano klaseng listahan gusto nyo Sir. Listahan ba ng materials na ginamit. Yung frame ng workbench, pinewood ang gamit ko na 2x4 tapos 2x3 naman yung pinewood na nasa loob ng frame. Tatlong 2x3x8 at tatlong 2x4x8 na Pinewood. Halos tatlong 3/4 plyboard at dalawang 1/2 plywood. Dalawang 1-1/2x2x8 kiln dried S4S wood. ( yung kahoy para sa frame ng table top ) 2 pcs 1x3x6 pinewood ( para sa shelves sa sides ng workbench ) Pioneer wood glue 60 pcs. 2.5” screw for wood, para sa frame, yung malaki para matibay. 1” black screw for wood 2” black screw for wood 1.5” black screw for wood 5 pcs 22” drawer slides ( ball bearing full extension slides 4 pcs soft close concealed hinge 6 pcs aluminum alloy drawer knob ( 6” long) 6 pcs swivel caster wheels ( 2.5” high) ( 4 with brake and 2 without brake) Davies aqua gloss it water based enamel White and black paint ( 1 liter each but not all paint is been use) Timber prime paint primer.
Ayos sir pulido talaga mga gawa mo. Suggestion lang sir mas maganda lagyan mo horizontal na harang yung lalagyan ng glue at spray paint mo para kung sakali malakas pagka alog ng work table mo is hindi siya malaglag o di kaya lagyan mo cabinet door.
Thank you sir Actually sir pinag iisipan ko pa kasi kung pintuan o yung harang lang bawat shelf. Sabi kasi ng asawa ko lagyan ko ng pintuan para walang kukuha.
Very nice looking build. I built a similar style bench and have noticed the wood frame warping some but not too much. Kind of wish I would have laminated plywood instead of using pine. I also wonder how often you'll have thing on the table and want something under the hinged top? Looks great and functional though. Really nice work.
Thank you 😊 This is my first time to use a pinewood for a project like this. I am not yet certain that this type of pinewood in the long run will warp. Because it is a hard pinewood. Actually, I’m having hard time putting a screw on it coz the wood is so hard. I don’t want to waste the space underneath the table top so I decided to make the design look like a door that can be open. I only keep tools that are rarely been used. Or maybe before I start to do something on top. I need to get the necessary tools that was kept underneath.
@@rexseven6907 New Zealand Pine. It’s different from the usual pinewood that I use. You need to drill a hole before you put a screw. Screw won’t go in without pre hole. Many times I broke the screw head. Anyway I’m happy with it. 😊
galing nyo po talaga sir! tagal ko na kayo pinafollow kc sobrang smooth po ng mga build nyo. tanong ko ln po kung ano un gamit nyo na pockethole jig at ginamit na black paint. salamat po!
Thank you 😊 Ordinary pockethole jig lang po yun. Sa Shopee ko binili, may kasamang drill bit, yung mahabang pockethole screw driver, at 10 pcs pockethole plugs. Nasa 500 plus lang bili ko. Ordinary pockethole lang sya pero napaka useful naman. Yung paint hindi naman talaga sya black paint. Dark gray po yun. Davies water based enamel paint na black tapos hinaluan ko ng kaunting white paint para maging dark gray ang outcome.
Thank you 😊 Sir Actually I was also planning to do a tools review, but this time I do not know yet how to and when to start. Anyway thank you for your suggestion. I am looking forwad to it, to do a tools review in the future.
eto palang ata nakita ko na content creator na woodworker na pwede ilaban sa mga foreign woodworkers maliban kay film that build 😅. from cutting to assembly magaling ang pagkakagawa and also Im a fan of modern minimalistic design. ayaw ko pinapanuod yung mga woodworker na para paraan ang ginagawa ika nga use the right tools and materials for the right job. boss next project floating TV/Media console.
Thank you 😊 Sir Gusto ko din talaga gumawa ng TV console pero wala pa kasi ako mapaglagyan. Cguro in the future. Sa ngayon ang ginagawa ko ay kung ano pang kelangan dto sa bahay. Anyway, thank you so much for your kind words. I am looking forward to your suggestion regarding floating TV console.
Oo nga eh. Ingat na ingat nga ako ngayon habang ginagamit ko na yung workbench. 😜 hehe. Pero matibay yung pagkagawa ko sir. Ang tigas ng Pinewood na ginamit ko. Hirap nga mag screw kaya kelangan butasan muna bago mag screw.
Looks great BUT... that hinge up top storage design is one of the worst ideas i have seen in a long time especially for a main work bench surface!!.. what do you do when your in the middle of a project and need something out of it??? You have to move everything off bench 🙄🤦♂️🤦♂️🤦♂️
Thank you 😊 There is a reason behind why I decided to put a hinge for the tabletop. There is a space left underneath the table top. I suppose to keep it fix but I don’t want to waste that space under so I decided to put a hinge in the table top so I can open and put some more tools. So far I don’t have any problems during my builds.
Ganda sir.. Sir napansin ko gumamit ka ng pako at screw, tanong po, ano yung sitwasyon o kelan ka gumagamit ng pako at screw? Bakit hindi na lang pako lahat o screw lahat? For sure may reasoning ito. Salamat
Thank you 😊 Sir Mas maganda kasi ang screw gamitin kasi meron syang thread kaya mas makapit sya at hindi natatangal yung mga dugtungan ng kahoy. Unlike sa pako madali syang mahugot kasi wala syang thread. Gumagamit lang ako ng pako tulad ng cover sa likuran. Kaya pako ginamit ko doon para hindi nila mahugot yung takip sa likod. Pagka ginamitan ko kasi ng screw iyun. Madali nilang tanggalin ang cover kasi nka screw. Pwede nilang gamitin ng screw driver para tanggalin. Kaya pako ginamit ko para hindi basta basta matanggal yung rear cover. Yung sahig naman kaya pako ginamit ko para hindi gaanong obvious yung mga ulo ng pako sa sahig. Unlike sa screw na kitang kita sya sa sahig.
Pinagkakasya ko lang kasi yung video in ten minutes para hindi mahaba para ma cover lang lahat. Actually kung susumahin ko lahat aabot mahigit 5 hours yung video sa pag build. Pero kelangan nasa 10 mins plus lang para naman meron manood. Yung pinaka basic ways lang ang pinapaikita ko para macover lahat. Anyway, if you have any questions. Please feel free to write it down here in the comment section. I will surely answer any queries you have regarding my builds. Thank you so much for watching…
Yun din naiisip ko sir pero cguro ang ilalagay ko lang dyan bihira lang gamitin na tools. At kung meron man eh kelangan makuha muna yung tool bago mag umpisa. Ginamit ko kasi yung space at sayang naman kung tatakpan lng ng table top. Para pwede pang lagayan.
Idol how much ung materials n ginamit mo and anung mga woods and plywood ung mga ginamit mo im so amaze sa gnwa mong bench parang gusto ko po gwin salamatnpo pa indicate nmn po ng mterials salamat🙏🙏🙏🙏🙏🙏
Thank you 😊 Hindi ko na matandaan kung magkano eksaktong nagastos ko kasi yung ibang plyboard at ibang kahoy mga retaso lang. estimate ko cguro more or less 10k nagastos ko sa materials. New Zealand Pine yung ginamit kong kahoy. Nabibili lang sa CITIHARDWARE Dasmariñas branch. 2x4x8” at 2x3x8” na New Zealand Pine. Tapos plyboard lang yung mga drawers at mga sides. Pati yung table top plyboard lng din na pinatungan ko ng 1/2 plywood para kumapal. Tapos nilagyan ng 1x1.5” na S4S wood sa gilid ng table top. Yung mga drawer slides, gulong at mga handles naman sa Shoppee ko lang binili kasi mas mura lang doon.
Sa mga local hardwares lang ako bumibili ng kahoy. Bilhin mo yung S4S kiln dried wood para malinis na. Yung tuwid at medyo matigas na kahoy para matibay. Medyo mahal yung S4S wood pero makakasave ka sa oras at pagod kasi malinis na yung kahoy at kaunting liha na lng. Piliin mo lng talaga yung mga tuwid na kahoy at matigas. Marami kasi medyo baliko at malambot na kahoy sa ibang hardware.
@@AceWinfieldLoyola Thank you sa advise sir. tips naman sir if pano kung un nakuha na kahoy eh hndi napansin na hindi pala straight, ano dpt gawin kpg ganon po?
Sir, paano pag may ginagawa ka sa table mo.. Tapos may gusto Kang kunin na gamit sa loob.. Edi tatanggalin mo PA ginagawa mo. Para kunin Lang ang tools na kaylangan mo???
Actually Sir ginamit ko lang yung space sa ilalim para hindi masayang. Magiging useless kasi yung space kung nka fix na yung table top. Anyway kung sakali man na meron ako kelangan kunin sa ilalim eh kelangan ko talaga tanggalin yung nasa ibabaw ng lamesa. O kya kunin ko muna yung mga kelangan ko bago mag umpisa sa trabaho. Anyway Sir 😊 thank you
Yung lagare na ginagamit ko ay sa Shopee ko lang binili. Japanese Ryoba double edged saw ang tawag dyan. Search mo lang sa Shopee “Japanese Ryoba Saw”.
Thank you 😊 Cguro nasa 5k yung Pinewood pa lang pang frame. Di pa kasama yung mga Plyboard at plywood. Mahal kasi yung nabili kong Pinewood kasi magandang klase na kahoy. Malinis na at matigas pa.
Beautiful AND very functional. Only thing I would add would be a 1" (25mm) lip on the edge of the shelves on the side to help keep the glue bottles and spray paint cans from falling off.
This is a pretty solid little workbench. While once you figure out how it comes together, it is physically Easy to assemble ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh by yourself. But the diagrams explaining the steps are really pretty bad. I could not get the handle pins in all the way despite multiple attempts, so I just used a screw I had on hand for the 2nd handle. I could not get the first pin in further or pull it back out. You are supposed to hammer it in, but I had no leverage and the handle is plastic and I did not want to risk breaking it. I will get a lot of use out of the bench because of the convenient size and height. It does fold up nicely for storage. They even explain how to fold it so you don't get pinched...that is important!
Thank you 😊
maybe one of the best workbenches I have ever seen
Thank you 😊
Great looking project. The only thing I would all would be some strong arms for the lift top.
Greetings from down under Australia….ang galing ang Gawa mo!
Thank you 😊
I should have done my work bench like yours very functional…..Sayang !
Well done. Great bench. Paul UK 🇬🇧
Thank you 😊
ganda bro linis ng pagkakagawa mo,,pareho tau ng upload bro,,
Thank you 😊 Sir…
Halos magkasunod ko pinanuod gawa nyo 😂
That's a remarkable build ... Love it ..THANKS for posting
Thanks for watching.
Dude. That rocks! You have some serious skills. Excellent video.
Thank you 😊
Clever use of space with the hinged lid! I might incorporate that into my next project 👍
I see one problem with this. If you are working on something, and have stuff on top, but you need something inside. It’s a good idea but you better get everything you need before you start.
ganda sir. quality na quality.
Thank you 😊 sir
Lagi ko inaabangan mga diy video mo! Two thumbs up 👍🏻
Thank you 😊
Great looking bench with amazing functionality. Kudos!!
Thank you
Ang galing nyo po. Sa lahat ng woodworker po na pinapanood ko, ikaw po yung pinaka-pino gumawa ng project :) more project and Videos to come po.
Thank you 😊 sir…
Ganda grabe!
Thank you ☺️
Ganda, hope mkgawa din ako nyan para organized din ang mga tools ko, thumbs up idol
Thank you 😊
This is some really high quality work. Good job.
Thank you 😊
I'm lost for words. That's a a triumph.
Thank you 😊
As always...galing ng gawa mo sir..malinis...inspiring!
Thank you 😊 Sir
Ang lupet sir . God bless ...
No skip ads.. thank you...
Thank you 😊 so much…
God bless you too
Excellent Sir, ganda ng gawa nyo. maganda sir may side rail cguro dun para support di mahulog ung mga andun na accessory. Very nice overall sir.
Thank you 😊
Ang linis ng trabaho mo boss
Thank you 😊
Ganda ng idea sir Ace..nice build!!
Oi thank you 😊 sir..
Nice diy workbench. More projects pa idol
Thank you 😊
Sa wakas my workbench kna idol d kna matyatyaga sa mesa muh na mini yan nlng kulang talaga sau☺️☺️
Oo nga sir. Actually hindi naman table yung dati. Lumang patungan ng TV lang yun na nilagyan ko ng Plyboard sa taas para magmukhang working table. Finally nagawan ko na rin ng maayos na workbench at the same time lagayan ko na rin ng mga tools ko.
Awesome project...👍👍👍
Thank you 😊
Ang solid nyo talaga gumawa Sir! sana nyo na ko subcriber ,sana next may magawa kang loftbed
Thank you 😊
Ganda sir.. very useful 👍 storage na din sya..
Thank you 😊 Sir
Yes Sir may lagayan na ako ng nga tools ko. Hindi na pakalat kalat.
Another quality na gawa na nman.
Thank you 😊 sir
Ang galing talaga Sir Ace.. Idol ka talaga👏👏👏
Thank you 😊…
Napaka ganda neto :) when I get my own place gagawa talaga ako ng workbench para wala ng sana all. hahaha Job well done sir.
Thank you 😊
Yes sir very useful ito sa may maliit lang na space sa pagawa ng mga DIY’s natin.
Wow, great work!
Thank you ☺️
Great job. Nice design, lots of storage and very fine details. Congratulations. Greetings from Paraguay.
Thank you 😊
Ganda po👊
Thank you 😊
Lupet idol. Baka gayahin namin ni misis to😁. Thanks👌
Thank you 😊
Sure sir.
Welcome back idol! Galing talaga!
Thank you 😊 Sir…
Solid pagkagawa. Nicely done.
Thank you 😊 sir…
Ganda idol galing mo keep it up😁
Thank you 😊 sir
Nice.. solid build bro, ganda👍❤️
Thank you 😊
Are there plans available for this build?
more sir ace... baka meron din kau diy island table na multipurpose for small spaces,,
Thank you for Watching. 😊
I always wanted to build an island table but I don’t have a place yet to put the island table. Maybe in the future.
Great job. Well done.
Thank you 😊
Pangmalakasan talaga 🤘🤘
Thank you for Watching
bro welcome back!
Thank you 😊
Bagong idea na nmn sir,,,,new subscriber,🙏🏻🙏🏻🙏🏻👍👍❤️❤️
Thank you 😊 Sir
Great job!!!
Great idea with the top!
Thank you 😊
welcome back bro, nasa pinas kana ulit?
Nice work!
Thank you 😊 Sir
Definition of love will change with how much experiences you have…..the older you are the more you realize your initial definition of love is not love but admiration….your initial love definition is the thought of what you’ll get from your partner when you have her/him..more like a trophy….but eventually you’ll found out that definition of love is not what you’ll get from your partner but what WILL you DO/GIVE to your partner…for example your life etc.
*sorry not a native english speaker 🥲
Wtf youtube bug LOL….I comment somewhere else but ended here? 😂😂😂
Very nice job!!! Looks great.
Thank you 😊
Nice work! Congratulations!
Thank you 😊
Good Work!
Thank you 😊
... ang galing mo bro... sa lahat ng na napanood kong DIY DRAWER.. sayo ang pinaka informative at madaling sundan... ano nga pala ang sukat ng gamit mong screw/turnilyo ??
Thank you Sir
Iba iba po sukat ng mga screw na ginagamit ko. Yung screw na ginamit ko sa 2x4 na kahoy, 2.5” screw ang ginamit ko. Pag sa 3/4 plywood na nka pockethole, 1.25” screw naman gamit ko. Pero pag hindi nka pockethole yung 3/4 plywood, 1.5” naman na screw gamit ko.
1st blood ako. Hehe. Congrats may bagong video upload ka na sir. 🙂
Thank you 😊 sir…
Sir baka pwede po pasilip ng listahan. Hahaha gusto ko po gayahin yung build niyo. Sobrang solid!
Thank you 😊 Sir
Ano klaseng listahan gusto nyo Sir. Listahan ba ng materials na ginamit.
Yung frame ng workbench, pinewood ang gamit ko na 2x4 tapos 2x3 naman yung pinewood na nasa loob ng frame. Tatlong 2x3x8 at tatlong 2x4x8 na Pinewood.
Halos tatlong 3/4 plyboard at dalawang 1/2 plywood.
Dalawang 1-1/2x2x8 kiln dried S4S wood.
( yung kahoy para sa frame ng table top )
2 pcs 1x3x6 pinewood ( para sa shelves sa sides ng workbench )
Pioneer wood glue
60 pcs. 2.5” screw for wood, para sa frame, yung malaki para matibay.
1” black screw for wood
2” black screw for wood
1.5” black screw for wood
5 pcs 22” drawer slides ( ball bearing full extension slides
4 pcs soft close concealed hinge
6 pcs aluminum alloy drawer knob ( 6” long)
6 pcs swivel caster wheels ( 2.5” high)
( 4 with brake and 2 without brake)
Davies aqua gloss it water based enamel White and black paint ( 1 liter each but not all paint is been use)
Timber prime paint primer.
Ganda niyan sir ah
Thank you 😊 sir
yun oh brod✌️🙂
Thank you 😊
great job well done
Thank you 😊
Galing naman boss
Thank you 😊 Sir
Ayos sir pulido talaga mga gawa mo. Suggestion lang sir mas maganda lagyan mo horizontal na harang yung lalagyan ng glue at spray paint mo para kung sakali malakas pagka alog ng work table mo is hindi siya malaglag o di kaya lagyan mo cabinet door.
Thank you sir
Actually sir pinag iisipan ko pa kasi kung pintuan o yung harang lang bawat shelf. Sabi kasi ng asawa ko lagyan ko ng pintuan para walang kukuha.
thank you ace hardware
Pareho tayo parekoy good job,nag diy din ako deto sa canada and i can see dewalt fan ka,Milwaukee fan nmn ako hihihi good job parekoy
Thank you 😊 for watching.
Pino talaga gumawa sir!
Thank you 😊 Sir
Ang ganda idol
Thank you 😊 sir…
Subscribed, pare! Keep it up!
Thank you 😊 sir
Great design and construction. 👍
Thank You 😊
Very nice looking build. I built a similar style bench and have noticed the wood frame warping some but not too much. Kind of wish I would have laminated plywood instead of using pine. I also wonder how often you'll have thing on the table and want something under the hinged top? Looks great and functional though. Really nice work.
Thank you 😊
This is my first time to use a pinewood for a project like this. I am not yet certain that this type of pinewood in the long run will warp. Because it is a hard pinewood. Actually, I’m having hard time putting a screw on it coz the wood is so hard.
I don’t want to waste the space underneath the table top so I decided to make the design look like a door that can be open. I only keep tools that are rarely been used. Or maybe before I start to do something on top. I need to get the necessary tools that was kept underneath.
@@AceWinfieldLoyola Do you know what species of pinewood it is? I've never used hard pine.
@@rexseven6907 New Zealand Pine. It’s different from the usual pinewood that I use. You need to drill a hole before you put a screw. Screw won’t go in without pre hole. Many times I broke the screw head. Anyway I’m happy with it. 😊
Be nice if you could provide plans for this bench!!
galing nyo po talaga sir! tagal ko na kayo pinafollow kc sobrang smooth po ng mga build nyo. tanong ko ln po kung ano un gamit nyo na pockethole jig at ginamit na black paint. salamat po!
Thank you 😊
Ordinary pockethole jig lang po yun. Sa Shopee ko binili, may kasamang drill bit, yung mahabang pockethole screw driver, at 10 pcs pockethole plugs. Nasa 500 plus lang bili ko. Ordinary pockethole lang sya pero napaka useful naman.
Yung paint hindi naman talaga sya black paint. Dark gray po yun. Davies water based enamel paint na black tapos hinaluan ko ng kaunting white paint para maging dark gray ang outcome.
Love it... are there plans available?
Thank you 😊
El uso dice que la tapa abatible sigue siendo una buena idea?
Please review all your equipment do you have and the price. It's awesome ace. Keep making new content 🙏🙏
Thank you 😊 Sir
Actually I was also planning to do a tools review, but this time I do not know yet how to and when to start. Anyway thank you for your suggestion. I am looking forwad to it, to do a tools review in the future.
This is great. !!!
Can I get plans for this?
Ang ganda ng gawa mo sir...
Paano po paglagay ng hinges sir?
Thank you 😊
Very nice sir!
Thank you Sir 😊
nice!!!
eto palang ata nakita ko na content creator na woodworker na pwede ilaban sa mga foreign woodworkers maliban kay film that build 😅. from cutting to assembly magaling ang pagkakagawa and also Im a fan of modern minimalistic design. ayaw ko pinapanuod yung mga woodworker na para paraan ang ginagawa ika nga use the right tools and materials for the right job. boss next project floating TV/Media console.
Thank you 😊 Sir
Gusto ko din talaga gumawa ng TV console pero wala pa kasi ako mapaglagyan. Cguro in the future. Sa ngayon ang ginagawa ko ay kung ano pang kelangan dto sa bahay.
Anyway, thank you so much for your kind words. I am looking forward to your suggestion regarding floating TV console.
ang work bench na ayaw mong magasgasan😀
Oo nga eh. Ingat na ingat nga ako ngayon habang ginagamit ko na yung workbench. 😜 hehe. Pero matibay yung pagkagawa ko sir. Ang tigas ng Pinewood na ginamit ko. Hirap nga mag screw kaya kelangan butasan muna bago mag screw.
Looks great BUT... that hinge up top storage design is one of the worst ideas i have seen in a long time especially for a main work bench surface!!.. what do you do when your in the middle of a project and need something out of it??? You have to move everything off bench 🙄🤦♂️🤦♂️🤦♂️
Thank you 😊
There is a reason behind why I decided to put a hinge for the tabletop. There is a space left underneath the table top. I suppose to keep it fix but I don’t want to waste that space under so I decided to put a hinge in the table top so I can open and put some more tools.
So far I don’t have any problems during my builds.
Ang ganda. Newbie here. Sana meron mga sukat para magaya 😁
Thank you 😊
Kuya excellent job. I'm a Sub!
Thank you 😊
I am gonna make one myself
Good DIY job sir..may I know.saan nyo po nabili yong Japanese saw nyo? Thanks
Hi Sir thank you 😊
Sa Shopee ko po binili yung japanese saw. Eto po yung link ng store sa Shopee
shopee.ph/raineshop77
Very nice po. Ano pong plywood ang ginamit ninyo dito. parang may design na sya.
Thank you 😊
Plyboard po ginamit ko. “RICHMOND” ang brand. Magandang klase na Plyboard yung Richmond.
Top top
Thank you 😊
Ganda sir.. Sir napansin ko gumamit ka ng pako at screw, tanong po, ano yung sitwasyon o kelan ka gumagamit ng pako at screw? Bakit hindi na lang pako lahat o screw lahat? For sure may reasoning ito. Salamat
Thank you 😊 Sir
Mas maganda kasi ang screw gamitin kasi meron syang thread kaya mas makapit sya at hindi natatangal yung mga dugtungan ng kahoy. Unlike sa pako madali syang mahugot kasi wala syang thread.
Gumagamit lang ako ng pako tulad ng cover sa likuran. Kaya pako ginamit ko doon para hindi nila mahugot yung takip sa likod. Pagka ginamitan ko kasi ng screw iyun. Madali nilang tanggalin ang cover kasi nka screw. Pwede nilang gamitin ng screw driver para tanggalin. Kaya pako ginamit ko para hindi basta basta matanggal yung rear cover. Yung sahig naman kaya pako ginamit ko para hindi gaanong obvious yung mga ulo ng pako sa sahig. Unlike sa screw na kitang kita sya sa sahig.
Ganda ng pagkakagawa mo sir, saan ka nakabili mga pinewood?
Thank you 😊
Sa Citihardware Dasmariñas branch ko binili yung Pinewood. Maganda kasi Pinewood nila. Matitibay at malinis.
Plans??
Ang bilis Sir mahirap sabayan😂😂
Pinagkakasya ko lang kasi yung video in ten minutes para hindi mahaba para ma cover lang lahat. Actually kung susumahin ko lahat aabot mahigit 5 hours yung video sa pag build. Pero kelangan nasa 10 mins plus lang para naman meron manood. Yung pinaka basic ways lang ang pinapaikita ko para macover lahat.
Anyway, if you have any questions. Please feel free to write it down here in the comment section. I will surely answer any queries you have regarding my builds.
Thank you so much for watching…
Ang problema lang dito siguro sir pag may nakapatong na then may need ka na tools na nasa loob. 😅 Panalo parin naman sir.
Yun din naiisip ko sir pero cguro ang ilalagay ko lang dyan bihira lang gamitin na tools. At kung meron man eh kelangan makuha muna yung tool bago mag umpisa. Ginamit ko kasi yung space at sayang naman kung tatakpan lng ng table top. Para pwede pang lagayan.
how there any plains
Idol how much ung materials n ginamit mo and anung mga woods and plywood ung mga ginamit mo im so amaze sa gnwa mong bench parang gusto ko po gwin salamatnpo pa indicate nmn po ng mterials salamat🙏🙏🙏🙏🙏🙏
Thank you 😊
Hindi ko na matandaan kung magkano eksaktong nagastos ko kasi yung ibang plyboard at ibang kahoy mga retaso lang. estimate ko cguro more or less 10k nagastos ko sa materials.
New Zealand Pine yung ginamit kong kahoy. Nabibili lang sa CITIHARDWARE Dasmariñas branch. 2x4x8” at 2x3x8” na New Zealand Pine. Tapos plyboard lang yung mga drawers at mga sides. Pati yung table top plyboard lng din na pinatungan ko ng 1/2 plywood para kumapal. Tapos nilagyan ng 1x1.5” na S4S wood sa gilid ng table top.
Yung mga drawer slides, gulong at mga handles naman sa Shoppee ko lang binili kasi mas mura lang doon.
Parts list please 😊
sir san ka nakabili ng lagare na ganyan
paano ka pumipili ng mga materyales mo na kahoy sir, tska ano anong type ng kahoy un mgandang gamitin sa pagawa ng furniture
Sa mga local hardwares lang ako bumibili ng kahoy. Bilhin mo yung S4S kiln dried wood para malinis na. Yung tuwid at medyo matigas na kahoy para matibay. Medyo mahal yung S4S wood pero makakasave ka sa oras at pagod kasi malinis na yung kahoy at kaunting liha na lng. Piliin mo lng talaga yung mga tuwid na kahoy at matigas.
Marami kasi medyo baliko at malambot na kahoy sa ibang hardware.
@@AceWinfieldLoyola Thank you sa advise sir. tips naman sir if pano kung un nakuha na kahoy eh hndi napansin na hindi pala straight, ano dpt gawin kpg ganon po?
@@AceWinfieldLoyola bedframe sir na minimalist natry nyo na gumawa sir?
Sir, paano pag may ginagawa ka sa table mo.. Tapos may gusto Kang kunin na gamit sa loob.. Edi tatanggalin mo PA ginagawa mo. Para kunin Lang ang tools na kaylangan mo???
Actually Sir ginamit ko lang yung space sa ilalim para hindi masayang. Magiging useless kasi yung space kung nka fix na yung table top. Anyway kung sakali man na meron ako kelangan kunin sa ilalim eh kelangan ko talaga tanggalin yung nasa ibabaw ng lamesa. O kya kunin ko muna yung mga kelangan ko bago mag umpisa sa trabaho.
Anyway Sir 😊 thank you
Dami kong tanong hehe.. Ung parang lagari po ano tawag dun.. Meron ba sa shopee nun hehe
Yung lagare na ginagamit ko ay sa Shopee ko lang binili. Japanese Ryoba double edged saw ang tawag dyan. Search mo lang sa Shopee “Japanese Ryoba Saw”.
lupet idol! :) magkano inabot ng woods sir?
Thank you 😊
Cguro nasa 5k yung Pinewood pa lang pang frame. Di pa kasama yung mga Plyboard at plywood. Mahal kasi yung nabili kong Pinewood kasi magandang klase na kahoy. Malinis na at matigas pa.
@@AceWinfieldLoyola sa citihardware ba yan idol? :D
@@paulg1828 yes sir sa Citihardware Dasmariñas branch nabili.
Saan ka po nakabili ng japanese saw?
Sa Shopee ko binili.
Eto yung link 👇ng store na pinagbilhan ko.
shopee.ph/raineshop77
ganda! Magkano Po inabot lahat?
Hi
Estimate ko sa materials nasa mahigit 10k plus.