P1682 Ignition 1 switch circuit 2 [SOLVED]

#OBDCodeP1682 #ignition1SwitchCircuit2
P1682 Ignition 1 switch circuit 2 [SOLVED]
This is very informative video on obd code P1682 on GM cars and trucks found lose connection between fuse and fuse box.

[@CarFaults]

I know its not car its truck so be with me main purpose is to let you guys know what is fault.

[@RELLIKPIR]

2010 malibu here... also a chevu product. Thanks for this inisight. We are having an intermittent issue identical to this. Runs fine then drops to limo mode randomly as well and this makes perfect sense that there is a bad connection. Probably not the relay.

[@roger8325]

Hey I also have the same issue with my 2011 Malibu! Did you figure it out

[@e.m6448]

​@@roger8325Bro, me either, do you resolved?

[@roger8325]

@@e.m6448yes! My mechanic replaced the fuse box and car runs great now

[@ahmedforkan88]

Thank you so much this fixed the issue with my car. Saved me a lot of money!

[@CarFaults]

Glad it helped!

[@davecameron1300]

Fixed my no start, stable track off reduced power. Ten min fix. Thanks

[@davidmagana5291]

Thank you for the video I bought a truck that has that code P1682 and in my case it was missing the fuse so after the fuse was installed problem solved

[@219Fishing]

So how did you fix ? Did you replace with new fuse ? Did you clean I ? Or replace the whole fuse box?

[@CarFaults]

I replace new fuse but before installing i twist fuse legs little bit so they connect properly with fuse box

[@obancameron]

Thanks for uploading, helped me diagnose it. Hard to find info on this

[@javedtech9155]

Good job brother. Keep up the right things. Thanks for such a useful stuff.

[@mariowalterlopez6936]

thank you so much for helping me solved the problem for this code .

[@edfoster8128]

thank you this worked on my 2018 Chevy Silverado

[@bigt8916]

Thank you for video, solved issue in 10 minutes. I will clean connections in fuse box or replace whole box. Subscribed

[@CarFaults]

Glad to know that.

[@iameafinaciones8224]

Great video. Thanks a lot.

[@pinkinwarri304]

What’s the best solution?. To replace the entire fuse box or clean up connection?.

[@CarFaults]

Better to replace the fuse box.
Or you can remove fuse box then locate wires and install external fuse holder and fuse

[@BoomInTheShot]

How did you figure out which fuse it was?

[@CarFaults]

Its my normal procedure to check fuses and move them lightly to check if connection is loose or not

[@vodity5534]

In case u are still having issues. Usually the fuse box has all the fuses labeled on the lid if u open it and look. Or look up a fuse box diagram for your vehicle. It is usually the fuse for your ignition

[@BoomInTheShot]

My fuse labels are a little different so it’s not totally obvious but unfortunately it won’t start at all right now. We did finally start narrowing it down to a power supply issue on a particular relay.

[@destak7263]

It helped but fuse burned out. Changed it again and got me home any help on what else I can do

[@CarFaults]

Maybe something is short which keep burning fuse

[@destak7263]

@@CarFaults ended up being a short but thanks for video. Helped me get the truck home a few times before finding it

[@alexandromorales7276]

What was the short

[@justtrue8228]

@@alexandromorales7276 nothing truck still works fine

[@alexandromorales7276]

You put it was a short but do you remember were

[@jerryschlageter6775]

Thank you ...you fixed my truck ....lol

[@dazariogibson7470]

What does that fuse control. I changed it it worked for a 2 weeks and now it keeps popping the fuse when I change it

[@CarFaults]

How much time it last now few minutes or pop right away?

[@dazariogibson7470]

@@CarFaults it blew right away

[@CarFaults]

@@dazariogibson7470 that's good.
Remove connector from all components even oil level sensor then replace fuse and try to crank engine connect back connector one by one then see which component is short.
No need to remove connectors from cam or crank sensor

[@dazariogibson7470]

@@CarFaults ok I will

[@icebrakernh]

Didn't work what it did was drive the problem to crazy. It's the ignition switch under the steering column.

[@CarFaults]

What i share is non common problem every one knows ignition switch is under steering column.
This fuse was causing that problem so i share it hope you understand!

[@icebrakernh]

@@CarFaults yes thanks

[@jamesfusco4056]

Thanks!

[@Issa-Al-Shukaily]

My friend, you are creative, thanks

[@chockygarcia6544]

Thanks

[@muhammadyaseen7550]

Mashallah bhai I like it works

[@jacobdalton5100]

Thank you

[@jp360ford2]

Habibi, are you the one that keeps calling me from the social security administration? 🤔😉

[@CarFaults]

:D no that wasn't me haha

[@amadouyacouba9029]

Merci

[@Grace-f2x1e]

Excellent

[@NOLASwetcoff]

Tried it and car will not ctank

[@Kingmobperformance]

Si it was the fuse box

[@gill6812]

براہ کرم اردو زبان استعمال کریں

[@CarFaults]

Phir comment ata hai English bolo 😔😔

[@gill6812]

Sir ap ki videos Pakistani Indian bangali etc zyada dekhtay hain is liay Urdu behtar hai

[@gill6812]

@@CarFaults ap Waheed Bhai ki videos dekhein woh Urdu boltay hain sahi samajh ATI hai

[@Sharks3000]

Thank you so much this fixed the issue with my car. Saved me a lot of money!

[@NOLASwetcoff]

Should I replace it