Well I learned something today…(again! ) the SnC cuts shapes in the order as they are loaded. No wonder our SnC seems to jump all over the mat while cutting. Too funny… too simple! Love this… thanks Becky!
Even though I can't afford an embroideryt machine I love watching what you do with it. The scan and cut seems to work great too. Thank you for sharing with us.
This is so unique, technology has come so far and it makes life easier and saves lots of time. Please know you are such a great teacher and I’m sure we all appreciate your time and effort. Thanks, have a great week, Green Bananas.
Girl Girl Girl!! You are so amazing! I purchased the XP2 with the XP3 upgrade and a whole bunch of other goodies! Have not gotten into my studio yet but I am so thankful for your videos!! So easy to follow and very informative!! Thanks a bunch!!
Watched a video a for sulky and they used sticky back stabilizer scrap pieces instead of tape to hold applique pieces down .so easy to remove if you stitch over it. Easier than removing tape. Just tear away stabilizer. Tried it and worked even to hold pieces on back of hoop.
I've learned from you so much. I got the Brother NQ1700E and it's wireless. Love it I have the book but still have not done a table topper.. Yours are all great.
Becky, just wanted to say, I MISS YOU!! you must be out having fun at the coast or something cuz missing your videos. Doesn't matter to me if it is a how to sew it or just catch up on what's happening, but you are always informative and always fun to watch and listen. Just thought I'd let you know, some of us in Washington state are missing ya'
I miss you too! lol There's not been a lot of fabric coming in to show, but I'm diligently working on projects for upcoming events. I wish it didn't take so darn long to edit videos! I plan to get one out today. Thank you!
Are you saying, I dont need my scissors in this process of a closed loop communication between the scan Ncut>Luminaire/Stellaire>then back to scanNcut? Is it possible to do one video with Embrillance sketch artist 2, then one WITHOUT embrillance (send wirelessly/usb) so that this entire process is seen in all it stages? Its nearly impossible to get anyone do this entire process where we see the initial cut by the scan and cut> then the file is sent to stellaire/luminaire for the applique process, then ACTUALLY see the scan Ncut, cut out the applique. I have a question about the stitch width that I cannot articulate. I just wonder if that stitch need more allowance so the thread is not cut. I dont know if that makes sense. I cant find not one video that shows this entire process. Most of it is just left to our imagination, or chopped over several videos where it is challenging to put the entire process together. Thank you. Many of your video have really helped me to understand my DX325 that I just purchased a few months ago. Thank you for your great tutorials. I do patches, and to see this entire process would help me so much
Hi Becky, Best4 dream edition makes the same that embrilliance? I want to cut my sweet pea designs and my juju by designs in the scancut 125. Sorry for my english I see all your programs in México City. Thank you for all I’ve learned from you. Ceci
Yes, but it does it differently. See page 246 of the BES4 manual. help.brother-usa.com/app/answers/detail/a_id/186352/~/bes-4-dream-edition-instruction-manual
Becky - I’ve been getting a weird static when I playback your videos. It’s all my devices too. Not sure I’d there’s an issue and I do not get it on any other videos.
Yes, unfortunately my camera audio developed a crackle. Drives me nuts. I've purchased an external microphone and it seems to have solved the problem, but there's nothing I can do for videos that were done without it. I'm so sorry! Next ones will not have this problem.
Hi great video, do you have another that shows how you take the pieces that you cut out back to the Luminarie and aligned them for appliqué stitch out? That’s the part I am struggling with.
Hi Becky, what embroidery thread do you recommend. I have a hod podge of different brands. I watched one of your videos ( I don't remember when it was) that you were selling some of your thread and going to something else. I can't find the video. I have learned so much from you.
I prefer DIME's Exquisite thread or Isacord. Well... my machines prefer those brands. :) I still have other brands floating around here and only use them in a pinch when they have a color I need and I don't have it on-hand in the preferred brands. www.shop.dzgns.com/collections/exquisite-1000-meter-spools?p=S1z1p1FgS
@@PowerToolsWithThread Becky - I am struggling with tacking down the applique!! When the piece fits in there exactly the tackdown stitch just travels around it and is not catching. I went back to Embrilliance and changed my size from 100% to 101.0% and it didn't help. What am I doing wrong??? I hope you see this question. I also hope I get to see you later this week at the AllBrands booth at the Houston Quilt Festival on Friday, Nov 3, 2023. Thank you for all your videos!
I'm not sure if the MyConnection feature is available on the Solaris. You might see if where the upgrade kits are listed on the Settings page, if My Connection is listed there.
I love all your videos. I am wanting to purchase the scan in cut. I have the brother nx1700e. I know we can't do that from my machine. So if I want to do that I need a program to set my design then send t scan and cut?
Yes, Embrilliance Essentials can be used to create svg files out of the placement lines in an applique design on your computer. You save those svgs to a USB and then take the USB to the SNC to make your cut out shapes. :) Here's a video of how to do it:ruclips.net/video/QsjNYng7qS8/видео.html And here's a link to Embrilliance: bit.ly/3RmHro3
Thank you for another GREAT video. I’ve been thinking about upgrading my Scan n Cut, from the 225. I hardly ever used it, but with technology I’m really tempted. That’s all due to your great videos. What is the main difference between the 325 & the 330D, the Disney designs? Thanks Becky.
I'm pretty sure the addition of Disney is the only difference between the 330D and the 325. I haven't been able to find a comparison chart yet to be sure however.
Hi Becky, I really love the table topper and I have searched Designs by JuJu until my eyes have crossed. I cannot find it and I would be forever grateful if you would point me in the right direction. Thanks so much!
Oh! That's because it is a Kimberbell design. :) I have the info to get the book and embroidery designs under the video. Here you go! Kimberbell Cuties Pattern Book - bit.ly/3FayfNM Kimberbell Cuties Embroidery CD (Uses a 6x8 embroidery field - this will not work in a 5x7 hoop) - bit.ly/3E3L2Qr
Becky I have the lumi xp1 will the scan and cut work or do I have to upgrade to xp2 (kit 2) ? Ty for your help! I would love to be able to cut all those pieces for my appliqué
Might be nice for you but us suckers in the Uk have no chance to get these scan n cuts ,we still are at sdx220.........unless we go to the us and bring it back without a guarantee on it we are stuffed!
Can’t do that here in the UK because Brother doesn’t allow us to have the machine to do this. Brother has let the UK Luminaire owners down. It’s really not fare at all. 🤬🤬🤬
I cannot thank you enough for this video it is excellent just what I needed to achieve my project with my new machines. Bless you
Glad it helped!
Happy 75th Anniversary to the Air Force. Thanks Becky and Keith for your service.
Well I learned something today…(again! ) the SnC cuts shapes in the order as they are loaded. No wonder our SnC seems to jump all over the mat while cutting. Too funny… too simple! Love this… thanks Becky!
THANK YOU, THANK YOU, THANK YOU! …and, thank you, Brother! ❤ Just set my scan n cut up today and connected it to my Stellaire!
Wonderful!
I can't wait to meet you, my husband has wanted to go on a cruise forever, meeting you put me over the edge.
Even though I can't afford an embroideryt machine I love watching what you do with it. The scan and cut seems to work great too. Thank you for sharing with us.
This is so unique, technology has come so far and it makes life easier and saves lots of time. Please know you are such a great teacher and I’m sure we all appreciate your time and effort. Thanks, have a great week, Green Bananas.
Girl Girl Girl!! You are so amazing! I purchased the XP2 with the XP3 upgrade and a whole bunch of other goodies! Have not gotten into my studio yet but I am so thankful for your videos!! So easy to follow and very informative!! Thanks a bunch!!
I love the owl. It is so cute!
You have sold me on getting a Luminaire when I get a new machine. I have the Scan & Cut SDX already.
Sweet! You'll love it! And you'll love them together!
Watched a video a for sulky and they used sticky back stabilizer scrap pieces instead of tape to hold applique pieces down .so easy to remove if you stitch over it. Easier than removing tape. Just tear away stabilizer. Tried it and worked even to hold pieces on back of hoop.
Point
@@sandrasimms9143 the "point" is there are more than one way of doing something that might be beneficial to the other viewers of this video.
I've learned from you so much. I got the Brother NQ1700E and it's wireless. Love it I have the book but still have not done a table topper.. Yours are all great.
Thank you!!! Just got my Luminaire3 today and followed your video. So easy to transfer to my Scan & Cut SDX325!!!
Yay! That's awesome! How fun. :)
Oh my goodness!!!!!!!!!!!!!!!!
Becky, just wanted to say, I MISS YOU!! you must be out having fun at the coast or something cuz missing your videos. Doesn't matter to me if it is a how to sew it or just catch up on what's happening, but you are always informative and always fun to watch and listen. Just thought I'd let you know, some of us in Washington state are missing ya'
I miss you too! lol There's not been a lot of fabric coming in to show, but I'm diligently working on projects for upcoming events. I wish it didn't take so darn long to edit videos! I plan to get one out today. Thank you!
This is great info.
I have this setup… now.. can you show us the appliqué part, going back to the machine.
This is a very helpful video!! Thank you!
ooh and can't wait for the new Brother app
Fantastic tutorial! I have the 330D, now all I need is a Luminaire.
Now you have a great reason to put it on your Christmas list!
Are you saying, I dont need my scissors in this process of a closed loop communication between the scan Ncut>Luminaire/Stellaire>then back to scanNcut? Is it possible to do one video with Embrillance sketch artist 2, then one WITHOUT embrillance (send wirelessly/usb) so that this entire process is seen in all it stages? Its nearly impossible to get anyone do this entire process where we see the initial cut by the scan and cut> then the file is sent to stellaire/luminaire for the applique process, then ACTUALLY see the scan Ncut, cut out the applique. I have a question about the stitch width that I cannot articulate. I just wonder if that stitch need more allowance so the thread is not cut. I dont know if that makes sense. I cant find not one video that shows this entire process. Most of it is just left to our imagination, or chopped over several videos where it is challenging to put the entire process together. Thank you. Many of your video have really helped me to understand my DX325 that I just purchased a few months ago. Thank you for your great tutorials. I do patches, and to see this entire process would help me so much
Wow! Great feature. Saves a lot of time. Thanks for the tutorial.
excellent video, by the way. I have to rewatch it to make sure I got it
Great information for the SNC 325 and 330D and Luminaire folks!! Good time saver. Thanks for the info.
I simply took what you showed me and ran with it! Thanks Katie!
@@PowerToolsWithThread 👍 Happy to be of help.
Hi! You've a gorgeous picture on your profile ☺️ just decided to stop by and say hi! I hope my compliment is appreciated!
I finally did it
Hi Becky, Best4 dream edition makes the same that embrilliance?
I want to cut my sweet pea designs and my juju by designs in the scancut 125.
Sorry for my english I see all your programs in México City.
Thank you for all I’ve learned from you. Ceci
Yes, but it does it differently. See page 246 of the BES4 manual. help.brother-usa.com/app/answers/detail/a_id/186352/~/bes-4-dream-edition-instruction-manual
Becky - I’ve been getting a weird static when I playback your videos. It’s all my devices too. Not sure I’d there’s an issue and I do not get it on any other videos.
Yes, unfortunately my camera audio developed a crackle. Drives me nuts. I've purchased an external microphone and it seems to have solved the problem, but there's nothing I can do for videos that were done without it. I'm so sorry! Next ones will not have this problem.
Excellent video😅
Thanks for sharing now I feel like I can do this. Have a fantastic day!
Thank you so much, you showed exactly what I needed on this video.
Becky does the my connection work with the 10 needle? I have the DX 330 SNC
Not yet that I have seen. Maybe they will do that since the 10-needle has Design Center in it too. Wouldn't that be nice?
Great video!! I sure hope Brother will allow Babylock this feature in the vision 3 upgrade!! Such a great feature
I hope so too!
What do you do when your mat is anymore sricky. I have ptoblem when I cut fabrick?
Try cleaning it with Cottonelle wipes a LA Totally Awesome from the Dollar Store.
Hi great video, do you have another that shows how you take the pieces that you cut out back to the Luminarie and aligned them for appliqué stitch out? That’s the part I am struggling with.
You will stitch the placement line in the design and then iron that cut piece in the space. 😊
Can’t find Brother’s MyConnection utility for Scan N Cut. Can you please provide link?
Here's a video where I show how to do this. ruclips.net/video/3Xf5FLKNvZA/видео.html
Did you put steam a seam on fabric or some kind of iron on on owls.
Yes, I used HeatNBond lite on the owl fabrics.
Hi Becky, what embroidery thread do you recommend. I have a hod podge of different brands. I watched one of your videos ( I don't remember when it was) that you were selling some of your thread and going to something else. I can't find the video. I have learned so much from you.
I prefer DIME's Exquisite thread or Isacord. Well... my machines prefer those brands. :) I still have other brands floating around here and only use them in a pinch when they have a color I need and I don't have it on-hand in the preferred brands. www.shop.dzgns.com/collections/exquisite-1000-meter-spools?p=S1z1p1FgS
You did not make the appliqué pieces a bit larger (1.3 mm)?
They fit fine with the 1.0 inflate in Embrilliance.
@@PowerToolsWithThread Becky - I am struggling with tacking down the applique!! When the piece fits in there exactly the tackdown stitch just travels around it and is not catching. I went back to Embrilliance and changed my size from 100% to 101.0% and it didn't help. What am I doing wrong??? I hope you see this question. I also hope I get to see you later this week at the AllBrands booth at the Houston Quilt Festival on Friday, Nov 3, 2023. Thank you for all your videos!
Becky, does this work with SVG files too?
Becky I have the Solaris, will you be teaching any of this on the cruise?? Why won't my brain let me figure this out😂
I'm not sure if the MyConnection feature is available on the Solaris. You might see if where the upgrade kits are listed on the Settings page, if My Connection is listed there.
@@PowerToolsWithThread thank you, I don't think it is
I love all your videos. I am wanting to purchase the scan in cut. I have the brother nx1700e. I know we can't do that from my machine. So if I want to do that I need a program to set my design then send t scan and cut?
Yes, Embrilliance Essentials can be used to create svg files out of the placement lines in an applique design on your computer. You save those svgs to a USB and then take the USB to the SNC to make your cut out shapes. :) Here's a video of how to do it:ruclips.net/video/QsjNYng7qS8/видео.html
And here's a link to Embrilliance: bit.ly/3RmHro3
Can you use the Brother 10 Pro if I have correct scan& cut
I don't think so. As far as I know, the MyConnection feature is only available on the Luminaire...for now.
Thank you for another GREAT video. I’ve been thinking about upgrading my Scan n Cut, from the 225. I hardly ever used it, but with technology I’m really tempted. That’s all due to your great videos. What is the main difference between the 325 & the 330D, the Disney designs? Thanks Becky.
I'm pretty sure the addition of Disney is the only difference between the 330D and the 325. I haven't been able to find a comparison chart yet to be sure however.
Can I di it with dx225 using a USB stick.?
I have an Epic. Would it be beneficial for me to get the Scan n Cut? Thanks!
DOES MY CONNECTION COME WITH THE UPGRADE TO LUMINAIRE XP2?
DID THE USB STICKS COME IN ALL THE COLORS YET?😊😊😊😊
My Connection can be enabled on any of the Luminaire XP models. And yes, we have USBs in lots of colors now.
How do you get the 16 digit certification? to connect the scan & cut with Luminaire?
it goes back to 225dx
Hi Becky, I really love the table topper and I have searched Designs by JuJu until my eyes have crossed. I cannot find it and I would be forever grateful if you would point me in the right direction. Thanks so much!
Oh! That's because it is a Kimberbell design. :) I have the info to get the book and embroidery designs under the video. Here you go!
Kimberbell Cuties Pattern Book - bit.ly/3FayfNM
Kimberbell Cuties Embroidery CD (Uses a 6x8 embroidery field - this will not work in a 5x7 hoop) - bit.ly/3E3L2Qr
Becky I have the lumi xp1 will the scan and cut work or do I have to upgrade to xp2 (kit 2) ? Ty for your help! I would love to be able to cut all those pieces for my appliqué
Yes! Any version of the XP machines will work, but you have to enable the My Connection feature. And you have to have the SNC SDX 325 or 330D.
@@PowerToolsWithThread ty Becky I have the 325 on order I am so happy I do not have to upgrade my machine
Might be nice for you but us suckers in the Uk have no chance to get these scan n cuts ,we still are at sdx220.........unless we go to the us and bring it back without a guarantee on it we are stuffed!
Will this work with the 1055x?
I TRIED TO SEND YOU AN EMAIL I DON'T KNOW IF IT SENT OR NOT.
Yes, I got it. I replied. :)
Can’t do that here in the UK because Brother doesn’t allow us to have the machine to do this. Brother has let the UK Luminaire owners down. It’s really not fare at all. 🤬🤬🤬
My grouse exactly!
Not properly stretched one one corner! Shame!