Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
I ordered new pads and rotors from FCP EURO. They arrived quick!
SBC system, no need to disconnect the battery?
What about the SBC system? Won't SBC move the caliper pistons and damage the brake system or crush your fingers while working? PLEASE ADVISE.
post facelift w211s including the e63 don't have SBC
Also applicable to W209 CLK55 AMG 2005 and 2006.
Yessir! Will be doing mine early 23.
2009E 63 AMG cam adjusters
Is this the same process for W212 2011 E63 AMG??? I can only find a video for the front brake pads/rotors. TIA
What's the tapping at 4:06
Are you sure about torque in 180 NM at 11:16 ?
Too high , Brembo spec is 115 Nm for M12 x 1.5 caliper bolts.
No brake lube for noise?
dude no paste between hub and rotor ! nothing !
I don’t think you needed to pry the pads, if you’re taking the calliper off.
He's just retracting the pistons by prying on the pads, he even says it in the video ;)
if you don't retract your pistons it will be hard to put the new ones in, yes the old ones are usually easy to come out because they're thin and worn.
no anti squeal paste? did I just waste my money bying that from you guys?
is it squeaking ?
🤩🤩🤩🤩🤩🤩💛🧡❤👍👍👍👍👍👍
I ordered new pads and rotors from FCP EURO. They arrived quick!
SBC system, no need to disconnect the battery?
What about the SBC system? Won't SBC move the caliper pistons and damage the brake system or crush your fingers while working? PLEASE ADVISE.
post facelift w211s including the e63 don't have SBC
Also applicable to W209 CLK55 AMG 2005 and 2006.
Yessir! Will be doing mine early 23.
2009E 63 AMG cam adjusters
Is this the same process for W212 2011 E63 AMG??? I can only find a video for the front brake pads/rotors. TIA
What's the tapping at 4:06
Are you sure about torque in 180 NM at 11:16 ?
Too high , Brembo spec is 115 Nm for M12 x 1.5 caliper bolts.
No brake lube for noise?
dude no paste between hub and rotor ! nothing !
I don’t think you needed to pry the pads, if you’re taking the calliper off.
He's just retracting the pistons by prying on the pads, he even says it in the video ;)
if you don't retract your pistons it will be hard to put the new ones in, yes the old ones are usually easy to come out because they're thin and worn.
no anti squeal paste? did I just waste my money bying that from you guys?
is it squeaking ?
🤩🤩🤩🤩🤩🤩💛🧡❤👍👍👍👍👍👍