Well planned and executed slideout done by a master craftsman for sure. Of all the DIY's for a slide out you are stars above them! Thanks for the share!!
I'm impressed. Good job. A simple and robust system, great. Was looking the YT for a sturdy "heavy duty" bed slide inspiration - and You certainly made my search come to an end. Yanks usually make it ,out of plywood.... That simply was not good enough for me. Big Thank You for this video. Defintely an extremely worthy content.
Yes, much better suited to someone who already has tool boxes and needs to be able to pull them out. You could always add a bottom plywood box for long levels, track saw tracks, etc. Good job!
I carry an iron rake in the back of my pickup - but I certainly like your sliding floor! Just spent the summer welding in new steel in the bed of it. Those plastic inlays are nice but lets the rust do a lot of damage unnoticed. Hope you make some more videos. This was great.
This is just what I was looking for. I've wanted to build one like this for my Ford with 8 foot bed. But after watching and seeing what tools I'll need it might be cheaper for me to buy one from Cargoglide.
The undercarriage design of this slider bed closely resembles that of the EXTENDO-BED, made by the Extendobed company in Boise Idaho. I've had an EXTENDO-BED on my 1996 F-150's 8 ft bed, since 1997, and it is still one of the best truck accessories, EVER. It is rated for carrying 1300 lbs fully extended (6 inches beyond the point of the tailgate), and I know that I've overloaded it several times by stacking bags of 60-Lb Quickcrete concrete mix. It's a workhorse. Modern versions of their Extendo-Bed are equipped with electric motors for ease of extending and retracting the sliding bed.
Great design mate ! Why can't all companies make their slide tray fully extend ! It's a no brainer! If you ever went into production I would definitely buy 1!
Great design you have saved me a lot of work, nice use of the cam roller bearings as well. nice job, i was wondering how the the 3 stage stops worked, nice one.
I am frequently amazed at how many people don't know about shoulder ( sometimes called Stripper) Bolts. they are perfect for mounting bearings. Maybe one would have to have been in the tool and die business to know of them. Check it out. Once you see them you won't ever mount a bearing with a threaded bolt again Nice build BTW really nice.
First off, this has been the best slides, capable of handling heavy loads. Very well enginered and built. Bravo Sir! Just would like to know where you obtained the small channel? I've had problems trying to source any channel smaller than 6". I would like to know where you found it?My build is similar only I added drawers on the bottom, the slide is above the drawers. Thanks
Hope your back gets better. Ive built 3 of them, for different trucks before my back gave out. I broke down and bought a Cargo glide/Slide 👍 Its made heavier but it over 2200lbs at full extension. Being a short guy this was the best
Fantastic! Thanks for posting. Some don't like the music, I'm sure it is a COPY WRITE thing. You should be paying attention to what he is doing. Mute it it bothers you. I think it is a concentration issue not a music issue. My I use the locking mechanism on a project I am working on? It is a ramp for my dogs to get in the truck,1 has had 3 knee surgeries and the other has had a stroke. It is their truck ,they just get me to drive them everywhere. I need a way to use 1ramp for either side and this lock may do the trick with a little modification.
I hope all is well! This is by far the best design and everyone is willing to pay for your plans. I think giving this a shot might surprise you and help out a lot more people than you'd expect. I hope you consider doing that. I would buy the plans for sure and if you need help creating plans feel free to communicate it- These RUclips people are super helpful! Best of luck!
Do you by chance have like a blue print I want to make this but like I feel like without a blue print it won’t turn out the way it is in that photo if you do that would be so amazing
This is fantastic design. I am trying to build camping trailer for my boyscout troop. This would be excellent for a pull-out cooler rack. If you could provide a drawing or any more information on this design it would be a big help. I understand if you do not wish to share the plans and will respect your decision. Thanks for the video though. There is not much information on these and pre-built options are very expensive.
Wow - this is next level shit. I 100% love it. Outstanding work fella. You should market and sell this into Australia. I'd buy it. All the best from Adelaide Australia.
wow this is so cool, this be great as a pullout work / welding table from a van, pleas how could I get plans for me to try and build ? nice job thanks for showing
Hola amigos, muy bonito su proyecto de la carrocería los felicito, pero las maderas yo la habría barnizado barnizado, unos de los maestros que hacia morisquetas debería ponerse una nariz de payasito jajaja Angel Nelson Antofagasta Chile
Well planned and executed slideout done by a master craftsman for sure. Of all the DIY's for a slide out you are stars above them! Thanks for the share!!
This is probably the best DIY slide on RUclips. I wish I had all the tools to make this oh and the skills... great video thanks for sharing!
If you could share your drawings and materials list, you'd be my hero. Need one for our survey truck.
I'm impressed.
Good job. A simple and robust system, great.
Was looking the YT for a sturdy "heavy duty" bed slide inspiration - and You certainly made my search come to an end.
Yanks usually make it ,out of plywood....
That simply was not good enough for me.
Big Thank You for this video. Defintely an extremely worthy content.
damn that's one of the best "pull outs" /i've seen in years and self made too boot. Karl
Awesome build! It's great that it extends so far out behind the truck bed.
Brilliant and unbelievably engineered, you my friend have talent. Thanks for sharing!
Отличная работа!!!!
Yes, much better suited to someone who already has tool boxes and needs to be able to pull them out. You could always add a bottom plywood box for long levels, track saw tracks, etc. Good job!
This is an awesome project! You sir are a master craftsman to be able to scratch build, & design this!
This needs more views, stunning bit of engineering!
Best design I've seen yet. Great job and thanks for some inspiring ideas!
If you are not selling plans to build this, you should be! Very nice design!
I've seen so many of these and this one is far and away the best I've seen! Great job!
Amazing. I wish I could make one like that. You're very talented.
Very nice design. I don't own a pickup but I still want to build one!
Awesome slide, great design, I will be fabricating something similar for my F150 after watching this, love the locks
The best one for diy without having to buy one. Wish I had a machine shop.
I carry an iron rake in the back of my pickup - but I certainly like your sliding floor!
Just spent the summer welding in new steel in the bed of it. Those plastic inlays are nice but lets the rust do a lot of damage unnoticed.
Hope you make some more videos. This was great.
Very well done. Elegant use of everything!!!!
This is just what I was looking for. I've wanted to build one like this for my Ford with 8 foot bed. But after watching and seeing what tools I'll need it might be cheaper for me to buy one from Cargoglide.
The undercarriage design of this slider bed closely resembles that of the EXTENDO-BED, made by the Extendobed company in Boise Idaho. I've had an EXTENDO-BED on my 1996 F-150's 8 ft bed, since 1997, and it is still one of the best truck accessories, EVER. It is rated for carrying 1300 lbs fully extended (6 inches beyond the point of the tailgate), and I know that I've overloaded it several times by stacking bags of 60-Lb Quickcrete concrete mix. It's a workhorse. Modern versions of their Extendo-Bed are equipped with electric motors for ease of extending and retracting the sliding bed.
Great design mate ! Why can't all companies make their slide tray fully extend ! It's a no brainer! If you ever went into production I would definitely buy 1!
Extendobed.com They've been around for decades.
Wish your company was in Australia 😢
excellent workmanship. I may have to copy your handy work, I only hope I can do it justice.. Again really good work
Perfeito, ótimo trabalho, parabéns 👏 👏👏👏👏
Thank you.
Wow, very smart! Thanks
Great project and build. You should market the plans for this design with materials list. I'm sure many folks would purchase.
Thanks for sharing.
Absolutely amazing, where can I order the plans... The very best Bed Slide I've seen yet. GREAT JOB
Trabalho incrível! Vou tentar reproduzir
Great job! The best I have seen. Thanks for the video.
Great job, Spectacular, congratulations.
Are any plans or even sketches available? I need to build one for my truck and my RV basement! Excellent design and execution!
A very nice job, keep it up.
BEST ONE OUT THERE FOR SURE!!!!!!!!!!!!!!!!!!
Spectacular!
great idea and u make it real. it should be the must hot up for the coming truck.
That's great !
Great design you have saved me a lot of work, nice use of the cam roller bearings as well. nice job, i was wondering how the the 3 stage stops worked, nice one.
Genius. Well done.
Show, parabéns e obrigado por compartilhar!
I am frequently amazed at how many people don't know about shoulder ( sometimes called Stripper) Bolts. they are perfect for mounting bearings. Maybe one would have to have been in the tool and die business to know of them. Check it out. Once you see them you won't ever mount a bearing with a threaded bolt again Nice build BTW really nice.
Thank you!
Excellent. Well done, thanks for sharing.
Very impressive, impeccable craftsmanship!
Impressive! I want one!!
Very nice setup and ingenious.
Great! Excelente trabajo!
What size roller bearing wheels are you using? Looks great!
You are a genius Sr. PF would be nice to see more videos on your channel :D
First off, this has been the best slides, capable of handling heavy loads. Very well enginered and built. Bravo Sir! Just would like to know where you obtained the small channel? I've had problems trying to source any channel smaller than 6". I would like to know where you found it?My build is similar only I added drawers on the bottom, the slide is above the drawers. Thanks
Good idea bro 👍👍👍
WOW, you did an amazing job.
A thousand thumbs up !
What is your back ground ? Great slide
Impresionante !!!!
素晴らしい! ディーラーはオプションで販売して欲しい
Super projekt.
cool if my back gets better I'll certainly be interested in building this thanks for sharing bud.
Hope your back gets better.
Ive built 3 of them, for different trucks before my back gave out.
I broke down and bought a
Cargo glide/Slide 👍
Its made heavier but it over 2200lbs at full extension.
Being a short guy this was the best
Fantastic! Thanks for posting. Some don't like the music, I'm sure it is a COPY WRITE thing. You should be paying attention to what he is doing. Mute it it bothers you. I think it is a concentration issue not a music issue. My I use the locking mechanism on a project I am working on? It is a ramp for my dogs to get in the truck,1 has had 3 knee surgeries and the other has had a stroke. It is their truck ,they just get me to drive them everywhere. I need a way to use 1ramp for either side and this lock may do the trick with a little modification.
Thank you for your comment. I am sorry about your dogs, I have two so I know what you feeling They are part of family.
Nice work. Well done. Obviously spent some time and effort on the details.
Top Work. I'm planing a thing like this. Thanx for Inspiration 👌
I hope all is well! This is by far the best design and everyone is willing to pay for your plans. I think giving this a shot might surprise you and help out a lot more people than you'd expect. I hope you consider doing that. I would buy the plans for sure and if you need help creating plans feel free to communicate it- These RUclips people are super helpful! Best of luck!
Genius design!!!
Good job, thanks for sharing
how was the frame secured onto the truck bed ?
Do you by chance have like a blue print I want to make this but like I feel like without a blue print it won’t turn out the way it is in that photo if you do that would be so amazing
good stuff,, whats the weight? could aluminum be used instead?
This is fantastic design. I am trying to build camping trailer for my boyscout troop. This would be excellent for a pull-out cooler rack. If you could provide a drawing or any more information on this design it would be a big help. I understand if you do not wish to share the plans and will respect your decision. Thanks for the video though. There is not much information on these and pre-built options are very expensive.
Awesome!
Exelente trabajo , que bueno seria trabajar contigo
Best diy slide out system
Thank you.
Wow - this is next level shit. I 100% love it. Outstanding work fella. You should market and sell this into Australia. I'd buy it. All the best from Adelaide Australia.
You need to get a Patent on this!
cool but whats 427kg and sizes of roller bearings. Im going to make this for a Miller welder generator slide out
Perfect man 👍👍👍💪👍
good job..whats the first song being played?
wow this is so cool, this be great as a pullout work / welding table from a van, pleas how could I get plans for me to try and build ? nice job thanks for showing
Very good idea 😊
thank you for sharing, it's very helpful.
Hi love the design wondering if you take orders?
Very good credit to you!!
Very nice job brother.
I like the concept
Hola amigos, muy bonito su proyecto de la carrocería los felicito, pero las maderas yo la habría barnizado barnizado, unos de los maestros que hacia morisquetas debería ponerse una nariz de payasito jajaja
Angel Nelson
Antofagasta Chile
Mate great job. Can I ask what you think it cost to make? Cheers 🇦🇺
Master!!!!🙌🙌🙌😂😂😂
Very good job👌
Bravo!!
Super!!
It came out nice! Fee free to add your video on our homemade tools forum :)
Dude Knows what he’s doing….
Great for a mobile funeral home viewing
what size bearings and bearing bolts did you use
" Excelent idea and development "
what size bearings and bearing bolts did you use?
Now if that extended long enough and fold down to become a ramp
Awesome!!!!
Brilliant!
What was the reason behind adding the extra angle iron on the U channel? Just for strength?
That’s bad ass and way overbuilt, the way I like it! But, cantoyota even handle that weight? lol jk
would you share the plans please, I know we would all really appreciate it
European "pickup truck" are like little toys compared to our North American pickups. Narrow roads over there 🤟
We do have bigger vehicles that fit on our roads.