Hey I would like to say thank you for showing this procedure as I was able to successfully code my key with both actions. My ignition barrel was also a bit sloppy so using the technique of applying a bit of pressure helped. The only think I found which my not make a difference was that I always started the procedure as if I just got in the car with it locked. So starting with the door shut and locked. Unlock doors, open door, close door, then begin your procedure. Not sure if this will help anyone else. But that is what I found
Worked for my 2008 N70 cheers🙏. Thought i was being stitched up😂 but turns out my door sensor/door light sensor was busted...replaced it and the method worked🎉
Thanks mate. I don’t know how many times I have watch this. You have helped me set up about 6 spares for my Hilux and friends Hiluxs. Today I didn’t have the success I normally do. I found out that the remote was a different frequency. So the key worked but not the remote. For others, look inside your original key remote and be sure the key you’re ordering has the right code. B41TH is what I needed, but the one I got (I should have checked before ordering it) was B41TA. Hope this helps someone else. Thanks again champ, your little video has been awesome.
Great video, managed to get everything working, but some how i have managed to program the lock button to unlock, and the unlock button to lock 🤷♂️ is that even possible to do? Or have I brought a dodgy transponder?
Only thing I can think is you maybe have an issue with the door light switch or you have a worn key barrel like I did and the car isn't registering the key is in the barrel maybe? As long as everything is done in order and fast enough the security light should go solid.
I’ve successfully programmed the transponder (ie. can start the hilux with the new key) but can’t program the keyless entry. I get to the learning mode where the locks cycle twice but no matter how many times I try holding the lock/unlock for 1.5 sec and then lock for 2 sec, nothing happens. Does this sound like a dud key or am I doing something wrong?
I'm having the exact same issue as u with the remote locking not working, I tried doing what he says in the video like 6 different times and it won't work
He forgot to mention you open the door (in description) at the end. Aswell as you have to hold both buttons, let go and QUICKLY (in description)and hold the lock button for 2sec
Yes I did but you do not need to, my old flogged out key barrel doesn't register the key unless you turn it a little or lean on it (which I couldnt do when opening the door) 😁
Tried this but still not opperating my locks, they work off the key in the door or switch but not remote??? The red light eluminates when i press the fob but no activation. Cheers lee
Thats odd, once the red light illuminates solid red, pressing both the lock and unlock buttons together within 2 seconds and holding them should cause the locks to lock and unlock indicating a successful coding.
Mate I've just bought a key off eBay, I can get my car to enter the programming mode but when I hold the two buttons followed by the lock button nothing happens. Do I need to have the key cut and transponder programmed before trying the remote locking? Cheers
As long as the locks cycle after you remove the key, it should be ready to accept a new key regardless. Within 40 seconds you need to hold the 2 buttons for 1.5 seconds then immediately after releasing them hold the lock button for 2 seconds, the doors should then lock. I hope that can help you out, cheers
@@simmoshomeworkshop Hi. I bought a Hilux recently without any central locking key whatsoever (lost or mislaid). I have two other regular type keys. Is it possible to buy a new key with buttons and reprogramme it for remote central locking using the method outlined? If so, can you please forward a link to the key on ebay. Regards and thanks, Seán.
I can confidently confirm that both methods work on a 2014 Hilux. Super easy, super simple.
Many thanks!
Hey I would like to say thank you for showing this procedure as I was able to successfully code my key with both actions. My ignition barrel was also a bit sloppy so using the technique of applying a bit of pressure helped. The only think I found which my not make a difference was that I always started the procedure as if I just got in the car with it locked. So starting with the door shut and locked. Unlock doors, open door, close door, then begin your procedure. Not sure if this will help anyone else. But that is what I found
Worked for my 2008 N70 cheers🙏.
Thought i was being stitched up😂 but turns out my door sensor/door light sensor was busted...replaced it and the method worked🎉
Worked today on my 2008 hilux. Thanks mate. Saved me alot of hassle.
Glad you mentioned the loose key barrel, mine was exactly the same, Absolute Legend!
Thanks. My buttons stopped working on my existing key. Went thru 2nd process u mentioned and it worked!
Wow, I’m surprised how well this worked, thank you
Just did this and it worked. I now have a spare key. Thanks.
Thanks mate. I don’t know how many times I have watch this. You have helped me set up about 6 spares for my Hilux and friends Hiluxs.
Today I didn’t have the success I normally do. I found out that the remote was a different frequency. So the key worked but not the remote. For others, look inside your original key remote and be sure the key you’re ordering has the right code. B41TH is what I needed, but the one I got (I should have checked before ordering it) was B41TA. Hope this helps someone else.
Thanks again champ, your little video has been awesome.
Thanks mate, good tip! Didn't know that, hope it can help someone else!
Where does the key show the frequency?? I can’t see anything codes?
Great instructions. Thank you for the video
Beauty video cheers for your help
Awesome. Saves the 3hrs they want you to leave it at the dealer for the same procedure!
Lol thought this was a prank but it actually Works
Awesome Simon, that worked perfectly
Thanks man this is awesome
Thanks mate, worked a charm
Great video, managed to get everything working, but some how i have managed to program the lock button to unlock, and the unlock button to lock 🤷♂️ is that even possible to do? Or have I brought a dodgy transponder?
Thank you!!!
Replace your ignition key switch. The little white one on the barrel housing with 2 wires, The car will then recodnise the key is in ..
Hi I was wondering would this work for the 2007 model Hilux as well?
Going to try to do the alarm one thing you missed is to turn the key on
Works nicely, thanks
Cheers mate you’re a legend!!
I wish it worked like that in my 2014 Hiace
Thank you!
This almost looks like a stitch up, but it works!? Off to go find said key on ebay.
Thanks bro..that full tank😅😅
Bro addresed clients as amateur mechanics😂
I managed the programming the buttons but the transpoder won't work light never goes solid I have a 2014 hilux
Only thing I can think is you maybe have an issue with the door light switch or you have a worn key barrel like I did and the car isn't registering the key is in the barrel maybe? As long as everything is done in order and fast enough the security light should go solid.
هل يوجد اختلاف بين الشفرات لموديلات من ٢٠١١ الى ٢٠١٦
Thanks!
Single remote button not working. Is there any other programming method for my single remote button toyota x corolla 2006? Please help me out.
I’ve successfully programmed the transponder (ie. can start the hilux with the new key) but can’t program the keyless entry. I get to the learning mode where the locks cycle twice but no matter how many times I try holding the lock/unlock for 1.5 sec and then lock for 2 sec, nothing happens. Does this sound like a dud key or am I doing something wrong?
I'm having the exact same issue as u with the remote locking not working, I tried doing what he says in the video like 6 different times and it won't work
He forgot to mention you open the door (in description) at the end. Aswell as you have to hold both buttons, let go and QUICKLY (in description)and hold the lock button for 2sec
@@lotusblack704
So open the door first and then hold two buttons or hold two buttons and open the door at the same time?
Hi dear what is the chip id for the remote
Does anyone know the name of the transponder chip?
Tried for european rav4 2006, the key fob works, the transponder chip programming thingy doesn't work...but thank you anyway...
After is both key will work
Legend!!
When you did the first set of steps "in/out 5 times" you turned the key to first click before open/closing door... Please confirm?
Yes I did but you do not need to, my old flogged out key barrel doesn't register the key unless you turn it a little or lean on it (which I couldnt do when opening the door) 😁
Does this work for Toyota Corolla Axio?
Has any tried on a LC FZJ105?
Will it work on fortuner 2009?
Tried this but still not opperating my locks, they work off the key in the door or switch but not remote??? The red light eluminates when i press the fob but no activation. Cheers lee
Thats odd, once the red light illuminates solid red, pressing both the lock and unlock buttons together within 2 seconds and holding them should cause the locks to lock and unlock indicating a successful coding.
Try this method. ruclips.net/video/dZ_aw1nj978/видео.html
Tried checking if your door sensor/door light switch activated on dash if the driver door is open? If not replace the door/door light sensor
Mate I've just bought a key off eBay, I can get my car to enter the programming mode but when I hold the two buttons followed by the lock button nothing happens. Do I need to have the key cut and transponder programmed before trying the remote locking? Cheers
As long as the locks cycle after you remove the key, it should be ready to accept a new key regardless. Within 40 seconds you need to hold the 2 buttons for 1.5 seconds then immediately after releasing them hold the lock button for 2 seconds, the doors should then lock.
I hope that can help you out, cheers
@@simmoshomeworkshop thanks for the video mate, can you show me the link for the key you bought. thanks
@@simmoshomeworkshop Hi. I bought a Hilux recently without any central locking key whatsoever (lost or mislaid). I have two other regular type keys. Is it possible to buy a new key with buttons and reprogramme it for remote central locking using the method outlined? If so, can you please forward a link to the key on ebay. Regards and thanks, Seán.
Will this work for a 1998 Hilux Surf?
Hey mate I don't think so unfortunately, maybe try this site for your vehicle erwinsalarda.com/how-to-guide-toyota-surf-rke-keyfob-programming/
What your engine 2tr ?
Mine is the 3.0l 1KD-FTV
Man you need to slow down 👍😂😂😂
Man you need to slow down 😭😭😭😭😭
😋🤣
Glad you mentioned the loose key barrel, mine was exactly the same, Absolute Legend!