Of most the rc RUclipsrs to watch out there, tomley is one of the most realistic channels for your average rc guy because we can actually try an get most the ones you feature an understand everything you talk about and it’s not like your one of the guys that’s super specific on bashing, racing or even the scale stuff. You do a healthy mix of them all for straight fun an never too serious about it 🤘🏽
Phil is an all-rounder, exactly why I enjoy his content. He's also unpredictable, you never know what's coming next which keeps it fun and interesting.
If air has to travel farther over the top then the bottom it will create a low pressure area on top. This is known as LIFT. That's how airplanes fly. You do want to control the air under the car to cause suction that will hold the chassis to the ground. The splitter in the rear tries to create enough low pressure behind the car to create suction under the car. Hope this helps keep your car on the runway.
Fast moving air under the car (low pressure) slower on top (high pressure) = downforce . Lots of variables, but that’s the basics I was explaining in the video
@TomleyRC very true though if you go again n mod the body at all try make or buy no clue if u can buy but id assume u can, an adjustable rear spoiler for fine adjustment to increase downforce at the rear. As for the front that big dent in the grill id use a heat to change the shape push it out to remove the drag as its acting as a brake admittedly only marginally but still its drag n drag slows u down obviously abit of electrical tape would cover it. You could also make adjustments to the front splitter to pull the nose down more, as well as add some fins to the front wings to create more downforce. Tape off the rear arches or cut a hole where the rear reg plate would sit to allow any air getting in to escape out the rear. Though if ur craft type u can cut out 3 edges the top n 2 sides of the rear reg plate bend it out so its like a flap any air that escapes at high speed would inherently push the rear down, i suppose if u kept the grill as it was and drilled a few holes in it like a real grill n then a hole in the bonnet hood scoop but vent in the direction of the windscreen so on a real car heat would escape rather than enter on that style scoop (reverse the scoop direction) im certain you'll understand you'll create further air flow and downforce. You dont need to work against oncoming airflow when you can modify the body to make it an aid to getting a higher top speed. I hope this didnt confuse u m8 im autistic my brain works in an odd way i see your rc car n see all the electrical and suspension components are great but id work on the body shell n use it n mod it to ur advantage if i was you. Trust me tweek that shell n it will help u gain a fair few mph's
0750 here in Arkansas USA!! Mornin Phil! Thanks for the video boss man, my vendetta is set to arrive today so I'm going to be gettin a pb this weekend, I'm excited!!
I know this will sound a little odd , but !!! At 53yo I'm back into the hobby of RC (I had a tamiya Hornet in the mid 80s) and I know other RC you-tubers do it, but I like many would really appreciate a little bit more technical information (because I'm a bit duff ) and know very little, and reading about things sometimes doesn't sink in , I find you easy to listen to, and your unpretentious, those two things are hard to find on here. Also I appreciate it all takes time to do , but feel free to make your vids longer 😁 , thank you for all your content, and know you are appreciated 👍
It's not odd Mike.... lots of people get back in to the hobby at your age, and mine (44). It is hard to make 'how to' videos without them ending up being long winded and for boring for 80% of the viewers, which can then effect channel growth. But I do have a plan to release some more technical videos and stuff, but not on here. Just need the time to sort it out.
congrats on making the 100mph club! now..if only i could get to the 50mph club..personal best is at 48..will continue to try! great vid and great job on the car and your videos! see you in the next one!
Also if the front shocks are causing problems what I do is either put old fuel tubing on the shocks and that’ll make it more rigid but still keeping the dampness
the front square grill is holding you back. It's like trying to push a brick through the wind. Project for you: build a wind tunnel and check the aero on your cars. I can't believe no one at ROSSA are doing that. I'm almost at the point I'm going to jump on the band wagon....
Congrats on the new personal best! I still cannot believe the Infraction went arse over tea kettle like a pizza box in a tornado. It weighs a freaking tonne!
I know that platform in Germany the Reely 1/8 cars are based on it. The only problem is the spider gears are made out of very cheap metal and after a short time they wear down. (Reely Generation X and Raptor)
Well this has been driven hard with every pack I’ve put through it… and then as you saw.. multiple 100mph passes, lots of tyre shredding… and no issues to report yet. So I’d not say it was a weak spot
Could you fit load cells front and rear to monitor lift / downforce? That way you could fine tune aero without expensive trial and error 🤷♂️ Just a thought.
Your vids are blowing up!!! Good job. I see you l click just like l do with Kev. Congratulations brother you made it. Lots of things will come your way.
Icr tommly. Man that mustang Ftx is bad to the bone. Have some free time . getting all caught up . showing support watching you now.🔥🔥👍👍. Your channel is great and educational. I love my shelbys and stangs. Very nice . taking this morning to catch up to all my friends and subs. Nice brushless motor. Nice🔥👍
Yes, I wanted to get the most from it. Although the best thing for me was that it ran the fastest speed pretty much with stock settings other than motor & ESC
I think it would be easier (and significantly cheaper) to get to 100 in the new rlarlo ak917 917 roller - $200 Quicrun 10bl120 - $45 3.5t eco power drag motor - $32 Contact foam tires - $20 Biggest 3S battery you can fit and some gearing tuning. I've run this same combo in a wltoys 124019 and got 106mph
It would take longer to get the Rlaarlo to 100mph than this. It takes about 6 months to work out how to get one to go straight 😅. But yeah… cheaper for sure (video soon for that)
I've done a few modifications once I hit 110 it would roll over. May I suggest wheel balancing sticky weights. Worked like a charm to keep it flat. Without touching anything else was able to grab another 8mph totaling 118mph
Wow! That car is impressive. I like the part in here about removal of the peice from the underchassis, thats good thinking 👍 Another goodie Phil, i love your videos ty❤
Hi, I am not sure to understand why you have removed the plastic part under the chassis. Indeed, this plastic part has a kind of bump (as on the side parts) that helps to promote a Venturi effect. I apologize for my poor English and if my words are not correct but I would have kept this plastic part on to help maintaining the car « stuck » to the ground.
Love the looks etc but here in New Hampshire the roads are so bad you couldn't drive 10 feet without jitting a hole or broken road. Shoot my typhon has gotten flipped etc hitting damaged roadway.
Tomley buddy the RadioLink controller you've got what booster are you getting for the controller mate and love the video as always buddy keep up the awesome work :)
Congrats on going faster with an RC car than my Dodge Chargers best speed. I was thinking, could adding wheel wells to the front wheels with a hole at the top keep the air from getting between the body and chassis? The top vent could let the air escape and push down a bit on the front end.
Hello, I want to get into this hobby of RC cars and for the beginning I am looking for something like jack of all trades. My main playground would be grass/gravel. I have a big garden so plenty of space to race about. Plus there is a gravel track at the park. I have been looking for something and at first was wondering about nitro powered one but maybe electric will be good enough. Some cons/pros would be great. Any suggestions? I would like something bigger like 1/10 scale maybe. Maybe some kind of buggy type. I do like off-road more. Any recommendations or suggestions would be gladly appreciated.
New to the hobby and looking to purchase a car for racing, I believe the track is carpet or astroturf at the local club... but before I join them I want to show up with a car that won't show me up. What would you recommend as a beginner budget 1/10 scale car that has potential with upgrades?
5:28 sorry, I think that's the opposite...you want low pressure underneath which is less air. The less air under a vehicle the better. If you could remove all air (aka make a vacuum) that'd be even better. The Goodwood speed run record is held by an ev that sucks the air out from under it. You were in aerodynamics weren't you? Planes get lift by high speed air under the wing and slow air above.
Yes, I've studied a little bit on Aerodynamics Low Pressure = Faster Moving Air High Pressure = Slower Moving The Air moving over the wing of an Aircraft is faster than what is going under....creating lift.
Nice. You might have to put just a few little stick weights in the front to keep it down. I had to on my slash cause it will take flight to when it raises and the air gets under neith it wants to take flight also. Your the best great Rip video
Rc friends I need your help. My hbx 16889a pro needs a better servo. I have the weehls of hbx 903. On aspfalt no problem but on Gras on my garden is it to slow. Wich cheap I can by. Thx 4 help
I cant believe how much powerfull is the max8 combo...i thought you must have 1650kv motor to hit 100+ miles! Can you tell us the gearing? (spur/pinion)
Congrats on the speed run PB. I only run foams over 130 mph anything below I run proline Toyo Proxes R988R S3 Rears and the fronts on my infraction. They have been good to me up to 138mph before they showed any sign of stretching. The grip is insane on black asphalt. They are discontinued but they just came out with the V2s. They look the same other than the spoked wheels. I can't see them being worse. I hope not, why would they discontinue a good set for something bad? lol. One important thing. They are belted tires so you never want to spool them up without them being on the ground. If your car goes airborne and you don't let off the throttle holding it wide open too long especially if you have a spool out the Belt in the tire will break rendering it useless. Kevin Talbot does it all the time with his tires on the bench with his belted offroad tires and wonders why they explode when doing offroad speed runs, HE had already destroyed the belts before the RC is on the ground. 😂 Krazy Kevin, lol.
Another awesome video there phil buddy and congratulations on the 100mph club with the Superforza , So the burning question you going to try and knock Nick off the top spot with a 157 mph or above . In the words of a adam sandler video "You can do it" Keep up the awesome work buddy Chris :)
Haha, cheers mate. Nicks speed was crazy… so probably not gonna go for that. But you heard it here first….. I’ve just bought the highly upgraded VTE2 roller he was selling… so some big speeds coming next year hopefully 🤞🏻
Great work! I really like the Supaforza GT. What a machine! Although, I can't make up my mind if they're damn expensive for an FTX, or damn cheap for an Arrma Infraction alternative!
FTX + the HW Sensored Combo is £687 if you buy it from Modelsport. The Infraction is £719. Faster and smoother than the Infraction for less money. Although the Infraction is epic as well 😎👌
Hello! Can you please tell me how to modify the motor mount so i can put a 23 tooth in my deathwatcher, highest i can put in mine is 21, without it being too tight...and how to change my center differential fluid? I changed my felony, but this car has that hand brake in the way....Thanks!
That's such a cool car, and that speed is ridiculously quick! Because of your video I've just ordered one in blue, Credit card shredded😂😂 Hopefully misses won't find out..
you said yours comes with 22 pinion , mine is a 12t fitted and a spare 14t but I only maxed at 52mph on 12T so are you saying that I can add a 20/22 pinion .
Why put a rear diff in front? Front diff is a talker ratio than rear to spin the smaller tyres faster. Wouldn't putting a front in the rear make more sense?
Hello, Thanks for sharing your video. Please I want to buy an RC drift car and I can't make a final decision between the Arma Infraction 3s and the FTX GT. There is not much difference in price, but i hope you can recommend the best overall. Many thanks
Of most the rc RUclipsrs to watch out there, tomley is one of the most realistic channels for your average rc guy because we can actually try an get most the ones you feature an understand everything you talk about and it’s not like your one of the guys that’s super specific on bashing, racing or even the scale stuff. You do a healthy mix of them all for straight fun an never too serious about it 🤘🏽
This is exactly what I try to do…..^^^^
Comments like this are always nice to see, as it means I’m doing the right thing 👌
Thank you 🙏
Phil is an all-rounder, exactly why I enjoy his content. He's also unpredictable, you never know what's coming next which keeps it fun and interesting.
@@FarmerFpv my wife says that as well 😁
Couldn't agree with this more.
Nicely said good sir! 😉
If air has to travel farther over the top then the bottom it will create a low pressure area on top. This is known as LIFT. That's how airplanes fly. You do want to control the air under the car to cause suction that will hold the chassis to the ground. The splitter in the rear tries to create enough low pressure behind the car to create suction under the car. Hope this helps keep your car on the runway.
Fast moving air under the car (low pressure) slower on top (high pressure) = downforce . Lots of variables, but that’s the basics I was explaining in the video
@TomleyRC very true though if you go again n mod the body at all try make or buy no clue if u can buy but id assume u can, an adjustable rear spoiler for fine adjustment to increase downforce at the rear. As for the front that big dent in the grill id use a heat to change the shape push it out to remove the drag as its acting as a brake admittedly only marginally but still its drag n drag slows u down obviously abit of electrical tape would cover it. You could also make adjustments to the front splitter to pull the nose down more, as well as add some fins to the front wings to create more downforce. Tape off the rear arches or cut a hole where the rear reg plate would sit to allow any air getting in to escape out the rear. Though if ur craft type u can cut out 3 edges the top n 2 sides of the rear reg plate bend it out so its like a flap any air that escapes at high speed would inherently push the rear down, i suppose if u kept the grill as it was and drilled a few holes in it like a real grill n then a hole in the bonnet hood scoop but vent in the direction of the windscreen so on a real car heat would escape rather than enter on that style scoop (reverse the scoop direction) im certain you'll understand you'll create further air flow and downforce. You dont need to work against oncoming airflow when you can modify the body to make it an aid to getting a higher top speed. I hope this didnt confuse u m8 im autistic my brain works in an odd way i see your rc car n see all the electrical and suspension components are great but id work on the body shell n use it n mod it to ur advantage if i was you. Trust me tweek that shell n it will help u gain a fair few mph's
@@TomleyRCi dont expect u to take on board owt i say but id hope if u do that in theory it would increase ur top speed n stop ur car taking off.
@@stephenblakey4913if you are going to do all that you may as well just run a more aero efficient body
@@TomleyRC👍👍🥰🥰🥰😍😍😎😎
0750 here in Arkansas USA!! Mornin Phil! Thanks for the video boss man, my vendetta is set to arrive today so I'm going to be gettin a pb this weekend, I'm excited!!
Morning dude. The Vendetta is an awesome Car. Mine should be here next week… going to try and convert it to the infraction so I have one of each 👌
I know this will sound a little odd , but !!! At 53yo I'm back into the hobby of RC (I had a tamiya Hornet in the mid 80s) and I know other RC you-tubers do it, but I like many would really appreciate a little bit more technical information (because I'm a bit duff ) and know very little, and reading about things sometimes doesn't sink in , I find you easy to listen to, and your unpretentious, those two things are hard to find on here. Also I appreciate it all takes time to do , but feel free to make your vids longer 😁 , thank you for all your content, and know you are appreciated 👍
It's not odd Mike.... lots of people get back in to the hobby at your age, and mine (44). It is hard to make 'how to' videos without them ending up being long winded and for boring for 80% of the viewers, which can then effect channel growth.
But I do have a plan to release some more technical videos and stuff, but not on here. Just need the time to sort it out.
Enjoy the hobby! It easily reduces my stress
Lol. I too got back into rc at 53. Had a tamia falcon in the 80s
Uploaded on time for my lunch break, nice one👍👍👌👌
Hope it was a good lunch 👌
@@TomleyRC sweet and sour pot noodle. At least I had a decent video to watch
@@grahamjacob710 I'm more a Bombay Bad Boy kinda guy haha
@@TomleyRC I try and have a different flavour each day. Got to mix it up a bit.
I'm reading this at 10AM in Wisconsin USA, and this made me hungry and want to try these noods you speak of.😂
Just woke up, and starting my morning off by watching my favorite rc RUclipsr 👌
Morning Jeff… have a great day 👌
That's awsome .
I've done 21t pinion last night.
... mental.
Time to upgrade it and maybe change stock tyres
congrats on making the 100mph club! now..if only i could get to the 50mph club..personal best is at 48..will continue to try! great vid and great job on the car and your videos! see you in the next one!
Also if the front shocks are causing problems what I do is either put old fuel tubing on the shocks and that’ll make it more rigid but still keeping the dampness
I did that… and show it in the video 😅
I was expecting 8s but i like your attitude! cheers mate
It really looks like an awesome bit of kit. It came out just after I got my Felony. Great vid as always.
Felony is an awesome car 👌
That thing is freaking sweet! Love that Mustang body in blue, so I wouldn't be too sad about having trashed the red one haha.
Yeah… I had to get a fresh body. It’s one of the best looking
the front square grill is holding you back. It's like trying to push a brick through the wind.
Project for you: build a wind tunnel and check the aero on your cars. I can't believe no one at ROSSA are doing that.
I'm almost at the point I'm going to jump on the band wagon....
Yeah. It’s not very streamline… but makes it more fun 😅
Congrats on the new personal best! I still cannot believe the Infraction went arse over tea kettle like a pizza box in a tornado. It weighs a freaking tonne!
Perfectly timed upload for mu lunch! Nice vid mate
Hope you have a good lunch 👌
I know that platform in Germany the Reely 1/8 cars are based on it. The only problem is the spider gears are made out of very cheap metal and after a short time they wear down. (Reely Generation X and Raptor)
Well this has been driven hard with every pack I’ve put through it… and then as you saw.. multiple 100mph passes, lots of tyre shredding… and no issues to report yet. So I’d not say it was a weak spot
5:48 maxed out on gearing ? what if you get a smaller spur and larger pinion ?
Could you fit load cells front and rear to monitor lift / downforce? That way you could fine tune aero without expensive trial and error 🤷♂️ Just a thought.
Good luck , I know you will achieve your speed goal, you always do...
Your vids are blowing up!!! Good job. I see you l click just like l do with Kev. Congratulations brother you made it. Lots of things will come your way.
Icr tommly. Man that mustang Ftx is bad to the bone. Have some free time . getting all caught up . showing support watching you now.🔥🔥👍👍. Your channel is great and educational. I love my shelbys and stangs. Very nice . taking this morning to catch up to all my friends and subs. Nice brushless motor. Nice🔥👍
Great job. It's interesting to see all the different setups you tried. The car performed extremely well. The blue body looks great!
Yes, I wanted to get the most from it. Although the best thing for me was that it ran the fastest speed pretty much with stock settings other than motor & ESC
@@TomleyRCسجاد العراقي ❤😊
I think it would be easier (and significantly cheaper) to get to 100 in the new rlarlo ak917
917 roller - $200
Quicrun 10bl120 - $45
3.5t eco power drag motor - $32
Contact foam tires - $20
Biggest 3S battery you can fit and some gearing tuning.
I've run this same combo in a wltoys 124019 and got 106mph
It would take longer to get the Rlaarlo to 100mph than this. It takes about 6 months to work out how to get one to go straight 😅. But yeah… cheaper for sure (video soon for that)
I've done a few modifications once I hit 110 it would roll over. May I suggest wheel balancing sticky weights. Worked like a charm to keep it flat. Without touching anything else was able to grab another 8mph totaling 118mph
12:44 what the heck? it sounds EXACTLY as my washing machine lol
😂
Wow! That car is impressive. I like the part in here about removal of the peice from the underchassis, thats good thinking 👍
Another goodie Phil, i love your videos
ty❤
Cheers dude. As soon as I saw it… I knew it had to stay off
That blue body is stunning.
I wish i had the money to buy one of these
Hi,
I am not sure to understand why you have removed the plastic part under the chassis. Indeed, this plastic part has a kind of bump (as on the side parts) that helps to promote a Venturi effect. I apologize for my poor English and if my words are not correct but I would have kept this plastic part on to help maintaining the car « stuck » to the ground.
Thumbnail 2.0 is really good work Sir.
Cheers Mate, Phil black looks good on Ya...
Troy 😎
superb video Phil, well done on the 109 have to say i like the red but the blue just pops, i am done with road cars but the blue is gorgeous
Smoke them tires 👍🔥
Love this video, and that car is awesome 👌🏾
I love this car looking to add it to my collection...
It’s awesome 👌
That really is an awesome looking car! I love the body!
Love the looks etc but here in New Hampshire the roads are so bad you couldn't drive 10 feet without jitting a hole or broken road. Shoot my typhon has gotten flipped etc hitting damaged roadway.
Looking closer at the other, Faster Forza, he has modded the motor mount or something. Looks to be more center/forward mounted. Bigger motor. Faster!!
Nice one mate 🏆💚 best ftx car ive seen 💯💯 smashed it bro 💯🏆💚👊
Thanks for the great video Phil, FTX have put a great car together here & at a great price too, tbh i am very tempted to pull the trigger & buy it !
Cheers dude
Tomley buddy the RadioLink controller you've got what booster are you getting for the controller mate
and love the video as always buddy keep up the awesome work :)
Congrats on going faster with an RC car than my Dodge Chargers best speed. I was thinking, could adding wheel wells to the front wheels with a hole at the top keep the air from getting between the body and chassis? The top vent could let the air escape and push down a bit on the front end.
Yes, there are a few tweak me that would help I’m sure 👌
Great content Phil!
Appreciate your channel giving attention to all different genres, budgets, classes, and experience of RC.
The 10:53 run looked really fast
Hello,
I want to get into this hobby of RC cars and for the beginning I am looking for something like jack of all trades. My main playground would be grass/gravel. I have a big garden so plenty of space to race about. Plus there is a gravel track at the park. I have been looking for something and at first was wondering about nitro powered one but maybe electric will be good enough. Some cons/pros would be great. Any suggestions? I would like something bigger like 1/10 scale maybe. Maybe some kind of buggy type. I do like off-road more. Any recommendations or suggestions would be gladly appreciated.
109mph NIIIIICE 👌🏻
Id have put a front diff in yhe rear for a bit more gearing, but you did awesome 😁
New to the hobby and looking to purchase a car for racing, I believe the track is carpet or astroturf at the local club... but before I join them I want to show up with a car that won't show me up. What would you recommend as a beginner budget 1/10 scale car that has potential with upgrades?
I don't think my current project will be going that fast, but it'll pull your car. 😆
FTX Supaforza or ZD Racing EX07 🤔 got to say they both look awesome 😎
I'm waiting for the new mjx truggy/basher jeep review!
Coming soon…
If they released this as a roller, I think it would be really popular if the price was right!
These cost about the same as an Arrma Felony 6S where I i live. Which would be better (stock) for bashing and the occasional speed run?
Buy the one with best part availability 👍
5:28 sorry, I think that's the opposite...you want low pressure underneath which is less air. The less air under a vehicle the better. If you could remove all air (aka make a vacuum) that'd be even better. The Goodwood speed run record is held by an ev that sucks the air out from under it.
You were in aerodynamics weren't you? Planes get lift by high speed air under the wing and slow air above.
Yes, I've studied a little bit on Aerodynamics
Low Pressure = Faster Moving Air
High Pressure = Slower Moving
The Air moving over the wing of an Aircraft is faster than what is going under....creating lift.
@@TomleyRC I learned something new, I thought it was SLOWER over the wing since it had more distance to travel...OOPSY lol
Everyday's a School Day :)
I like the blue body much more, hate to see that one get damaged.
Nice. You might have to put just a few little stick weights in the front to keep it down. I had to on my slash cause it will take flight to when it raises and the air gets under neith it wants to take flight also. Your the best great Rip video
just got my vorteks and its MASSIVE... cant even imagine an 8th scale
👍 nice video, still great speeds with a stock body and massive winds 😮
Yes… it was windy wasn’t it 😅
@@TomleyRC maybe next time we’re there it will have better weather 🤞
Rc friends I need your help. My hbx 16889a pro needs a better servo. I have the weehls of hbx 903. On aspfalt no problem but on Gras on my garden is it to slow. Wich cheap I can by. Thx 4 help
Glorious!! 🎉 Well sent!! Wish I could get one overseas easily. ❤️❤️
Fantastic work and run, Phil! 😃
Crazy fast car!!!
Stay safe there with your family! 🖖😊
Been finding it really hard to find good videos lately glad i found your channel🙏🏻🔥
Thanks dude. Glad you found me 😇
this is awesome !!!
Cheers mate
I cant believe how much powerfull is the max8 combo...i thought you must have 1650kv motor to hit 100+ miles!
Can you tell us the gearing? (spur/pinion)
As far a parachuting, the Arrma vendetta has those holes over the wheels, allowing the air to release and keep it planted!
Well done on the 100mph Phil. I reckon that car is a really solid offering. Only problem for me is that I have an Infraction.
Infraction is a solid choice for sure 👌
Niiiice. Those bodies are like $200 here in the states.
loved it, what's the total cost though? starts getting spendy to hit 100! great video as ever 👍🍺🇬🇧
Car, Motor Combo & Servo makes it about the same as a stock Infraction (UK prices)
Congrats on the speed run PB. I only run foams over 130 mph anything below I run proline Toyo Proxes R988R S3 Rears and the fronts on my infraction. They have been good to me up to 138mph before they showed any sign of stretching. The grip is insane on black asphalt. They are discontinued but they just came out with the V2s. They look the same other than the spoked wheels. I can't see them being worse. I hope not, why would they discontinue a good set for something bad? lol. One important thing. They are belted tires so you never want to spool them up without them being on the ground. If your car goes airborne and you don't let off the throttle holding it wide open too long especially if you have a spool out the Belt in the tire will break rendering it useless. Kevin Talbot does it all the time with his tires on the bench with his belted offroad tires and wonders why they explode when doing offroad speed runs, HE had already destroyed the belts before the RC is on the ground. 😂 Krazy Kevin, lol.
This look so cool! I want it but no money 😢
Another awesome video there phil buddy and congratulations on the 100mph club with the Superforza , So the burning question you going to try and knock Nick off the top spot with a 157 mph or above . In the words of a adam sandler video "You can do it"
Keep up the awesome work buddy
Chris :)
Haha, cheers mate. Nicks speed was crazy… so probably not gonna go for that. But you heard it here first….. I’ve just bought the highly upgraded VTE2 roller he was selling… so some big speeds coming next year hopefully 🤞🏻
right keep them stock ish then :) nice job bud 👍
There's a 2nd version of this Fs racing model dt 8s version which come equipped with HW max 6 esc & 4985 1250kv
Name of the tires? And link??
Please please get the rage rc 4x4 mini trek
Sweet upgrade
The hobbywing 4278 2250kv is less than the stock motor 2000kv. Why use that. And not just change esc . Please explain
Needs a shiney black body!
Always a lot of fun…love the look of that RC! Wow, can’t keep it on the ground!
Any proper speed car has to be blue. It’s a given!
Great work! I really like the Supaforza GT. What a machine!
Although, I can't make up my mind if they're damn expensive for an FTX, or damn cheap for an Arrma Infraction alternative!
$800 USD from what I can see....it IS 1/7 though......
FTX + the HW Sensored Combo is £687 if you buy it from Modelsport. The Infraction is £719. Faster and smoother than the Infraction for less money. Although the Infraction is epic as well 😎👌
Hello! Can you please tell me how to modify the motor mount so i can put a 23 tooth in my deathwatcher, highest i can put in mine is 21, without it being too tight...and how to change my center differential fluid? I changed my felony, but this car has that hand brake in the way....Thanks!
I Have the same car ..can I put the Max 8 ESC in it without changing motor ??
Whr can get the spool? What if arrma limitless spool can be use?
Wanting to upgrade my apache.any suggestions on motor escape combos
Very nice video and besutiful car ! Did you change the center spur diff for a fixed diff ? Or its running the stock one witht the 27 pinion gear ?
That's such a cool car, and that speed is ridiculously quick!
Because of your video I've just ordered one in blue,
Credit card shredded😂😂 Hopefully misses won't find out..
you said yours comes with 22 pinion , mine is a 12t fitted and a spare 14t but I only maxed at 52mph on 12T so are you saying that I can add a 20/22 pinion .
Can I buy the car and how to buy it?..❤🙄
Lol you messed me up with your thumbnail being a blue car😂
Where can I get that red body??
Will that servo help my Deathwatcher turn shaper??
Whats a good tyre for this my first outing the tyres are shot off one battery haha
Why put a rear diff in front? Front diff is a talker ratio than rear to spin the smaller tyres faster. Wouldn't putting a front in the rear make more sense?
Does anyone know the spur size or if you can change the spur on this?
Sick outro!
Cheers dude
Have no idea what he's talking about. But this seems cool
Hello,
Thanks for sharing your video.
Please I want to buy an RC drift car and I can't make a final decision between the Arma Infraction 3s and the FTX GT. There is not much difference in price, but i hope you can recommend the best overall.
Many thanks
If the GT is better over the 3s, still the Interaction 6s is the best ?
Thank again
Whr can get the spool?
Why dont you car guys use ExpressLRS like we drone folks do?
How much is this ? And whats it hit mph from stock