Thanks for your hard work and video good information. I have a honda accord 10 generation and I get all dash lights all car work fine drive fine but i get main message EPS and supplemental restraint system problem local car parts plug cod reader and said that but also said right front passenger side wheel sensor is bad,,, please can you share your insight how to cure this issues? Thanks
The handbrake can't be lowered on the 2019 Honda Civic, what do you think? even though the parking switch has been replaced but still can't get off the handbrake
Sir i have already encountered that kind of trouble. i have uploaded that video herein my youtube channel. Handbrake is stuck-On. The only difference is that the electrical connection is obviously damage but just the same symptom. You have to find the open circuit. It might be fuse, wire, ground line or worse is the motor/actuator itself. But of course functional test using scanner is always easier than manual way of troubleshooting.
The EPB button suddenly stops working and I cant release the brake. Can this scanner send commands to the EPB motor to release the brakes? My car is a Honda Civic 2019.
Yes it can, if your scanner has the link for functional test. You also have other option to release the brake by applying direct voltage to the actuators.
Sir may tanong po ako.. Nagpalet po kasi ko ng key cylinder assy.. Tapos nun naprogram nakatanggal un pinto ng driver side. Ngaun po 2 door lang un ng lock n unlock na gumagana sa remote ano kaya problema nun sir..
Hi sir, first of all equipped ba ang sucurity system ng car ng keyless entry 5th generation and above? Kung "yes" hindi po talaga gagana dahil meron sensor and antenna specially driver side. Kung "no" dapat gumana yan. Check first voltage across the load which is your door lock actuator. Seconds lang yun sir, there should be battery voltage during lock and unlock function. Because of your comment, i will upload my old videos soon which is related to that.. nagtravel ako kaya late reply ko but i hope nakatulong ito.
Good work , hi sir am working on 2019 crv and my electric parking brake is not working, o test the motor on the rear brake caliper and it’s working perfect but if I press the parking brake switch it’s working, I scan the the abs module and it was given me C1100 which says electric brake actuator malfunction and CAN communication with SRS failure, I checked all fuses and everything is working. I need your help to solve this issue. Tanx
that’s more likely loose connection if you are 100% sure there was no faulty component. But there is a possibility of intermittent failure. i advice you to retighten contacting terminals specially the motor and the switch. Clear all DTCs, reset and perform system initialization. if still didn’t work, further troubleshooting is advised for component failure.
Honda CRV 2018 ito Sir.. Kung Honda Odyssey ang kursunada mo sir i recommend year model 2012-2015 ang pinaka maganda ang performance compare among the rest of all the year model of honda odyssey.
Thanks for your hard work and video good information. I have a honda accord 10 generation and I get all dash lights all car work fine drive fine but i get main message EPS and supplemental restraint system problem local car parts plug cod reader and said that but also said right front passenger side wheel sensor is bad,,, please can you share your insight how to cure this issues? Thanks
The handbrake can't be lowered on the 2019 Honda Civic, what do you think? even though the parking switch has been replaced but still can't get off the handbrake
Sir i have already encountered that kind of trouble. i have uploaded that video herein my youtube channel. Handbrake is stuck-On. The only difference is that the electrical connection is obviously damage but just the same symptom. You have to find the open circuit. It might be fuse, wire, ground line or worse is the motor/actuator itself. But of course functional test using scanner is always easier than manual way of troubleshooting.
@@generescudero9492 ok thanks you
Congrats po sa 1k views 👏😘❤..
The EPB button suddenly stops working and I cant release the brake. Can this scanner send commands to the EPB motor to release the brakes? My car is a Honda Civic 2019.
Yes it can, if your scanner has the link for functional test. You also have other option to release the brake by applying direct voltage to the actuators.
whats the name of the function test @@generescudero9492
Thanks i have a crv and have a same problem
Why you don't try active test or this car not support this option
Wow dami na views❤️🥰🥰
Sir may tanong po ako.. Nagpalet po kasi ko ng key cylinder assy.. Tapos nun naprogram nakatanggal un pinto ng driver side. Ngaun po 2 door lang un ng lock n unlock na gumagana sa remote ano kaya problema nun sir..
Hi sir, first of all equipped ba ang sucurity system ng car ng keyless entry 5th generation and above? Kung "yes" hindi po talaga gagana dahil meron sensor and antenna specially driver side. Kung "no" dapat gumana yan. Check first voltage across the load which is your door lock actuator. Seconds lang yun sir, there should be battery voltage during lock and unlock function. Because of your comment, i will upload my old videos soon which is related to that.. nagtravel ako kaya late reply ko but i hope nakatulong ito.
Good work , hi sir am working on 2019 crv and my electric parking brake is not working, o test the motor on the rear brake caliper and it’s working perfect but if I press the parking brake switch it’s working, I scan the the abs module and it was given me C1100 which says electric brake actuator malfunction and CAN communication with SRS failure, I checked all fuses and everything is working. I need your help to solve this issue. Tanx
that’s more likely loose connection if you are 100% sure there was no faulty component. But there is a possibility of intermittent failure. i advice you to retighten contacting terminals specially the motor and the switch. Clear all DTCs, reset and perform system initialization. if still didn’t work, further troubleshooting is advised for component failure.
@@generescudero9492 I checked every wire and everything is ok -fuses ok , I scan all the module but only the airbag that machine can’t communicate,
Sir crv ba yan? Anong yr model?
Kung kursunada ko sir ng honda odyssey na 2nd hand, anong yr model sir ang maissugest mo?..
Honda CRV 2018 ito Sir.. Kung Honda Odyssey ang kursunada mo sir i recommend year model 2012-2015 ang pinaka maganda ang performance compare among the rest of all the year model of honda odyssey.
@@generescudero9492 thank u idol, ipon ako ng pambili.. 😁
Broom, broom!..