How to use DEFU 368A manual cutting machine Laser cut key HON66 Honda Civic
HTML-код
- Опубликовано: 24 июл 2021
- Key was purchased on amazon
I already programmed the key to the car to it’s immobilizer.
Using DEFU 368a
Please support me by donating so i can keep making great content.
Paypal: autopurlieu@gmail.com
Cashapp: $AutoPurlieu
Venmo: @Legend_gary
Thank you
Join this channel to get access to perks:
/ @autopurlieu 
Авто/Мото
very good video!
Amazing and satisfying video
Thank you for your support
Hi the bro that’s a cavity key cutter not laser as shown on title. Great job for a budget machine 👍
Maybe you have a different definition.
You can google what “laser key” means.
Thank you for your support 🙏
If you hold your key guide at a 45° angle facing up, it will make it easier and more accurate when setting the distance of the block
Yes and I tried that. Unfortunately, the probe and cutter won’t reach the bottom part of the key. I meant to extent the key blade over the top so it will cut from top to bottom .
Lol, You scared me I watched this video as a refresher, been four or five years since I cut one. It’s the only blank I have but I just tested it. It works fine. Thanks for the refresher video. Do you have any on the programming?
@@Jonny5aliv3 yes. You can browse my playlist. Plenty of different kind of programmers video
How can I get this machine and at how much.
Wow nice video
Great video
Thank you, pls share
Hello po watching now
gracias por la ilustración😊
Denada ! Thank you for your support 🙏
Nice
Everytime I do this it seems like there's a 1/16 inch difference between the tracer and cutting bit
nice video
Thank you
Nice video, remove the nuts and just use the black handles that came with the machine I had issues with that part of the sitting up until I figured that out
Thank you , yes , I’ve remove the nuts. It’s driving me nuts lol. It makes a lot easier 👍🏽
@@autopurlieui saw that lol, when I first got it I was using both nuts n handles the key kept flipping out and also damaged 😅 so I sat and think
Which nut
@@mosestm1099 the nut thata between the black tighten knob
@@ricardowhyte6100 thank you
Done share en watching
Super!
Will this cut regular car keys as well?
That's good
Thank you sir
What size cutting bit did you use? You make it look so easy! Nice video.
Thank a lot . I used 1.5 but I think I could’ve used 2.5 with no problem and it would cut faster.
Compared to other RUclips videos right?
I have same question do you happen to have a link to tool in each side
@@RobertDickens2002 link on what is it ?
That would be 2ml
I have a similar Honda key. Where I can cut the duplicate? I stopped at HD, they said they don't do Honda keys. I just need to cut, no programming is needed.
Ace hardware do cut and program. Or find a local local most around or look on Facebook marketplace
done
Physical key is fine but how is the bluetooth unlock is working?
Please explain...
What Bluetooth ?
What size adapter or spacer are you using? and where to find thank
I had a home made spacer. But I believe there’s a pair selling on eBay
I got a question I did duplicated a key for a crv but it won’t turn the ignition but the original it does turn it but I have the same bite
Sometimes when the clamp is over tight it goes crooked at end tip of the blade. It goes sideways. That makes it not turn the ignition cylinder .
@@autopurlieu so what should I do
What machine did you use to program the key to the car's immobilizer? Thanks.
For this particular one, I used Launch X431 V pro.
I do use APP most of the time now
@@autopurlieu APP ? Which is that? Thanks.
@@istvanmeissler2238 AutoProPad
, I used in this video
ruclips.net/video/vr1jB8UxhfA/видео.html
@@autopurlieu Thank you very much for the information and for your video. Very good information. Best wishes to you.
@@istvanmeissler2238 thank you brother.
Is it possible to cut a key without a copy on the other side? When customer has lost all keys scenario. If not how to do it?
Not with this machine. Cut it by key code
Wish you could have shown setting the machine up, I think you have to do a few tweaks to it before using it
I barely use this manual machine now but once in a while I use it .
The most critical part is to set the level tip of the both cutter and the other tip level.
Maybe I’ll make a quick video how I do it
Check my new video , I hope it helps you. 👍🏽
@@autopurlieu thank you for taking the time to do the video!!!! needed this really badly
@@pouncerminned863 check it now. It’s already uploaded . Not sure if that’s what you need . I hope it helps.
Just message me if you need more help. 👍🏽 or if anything I can help remotely
@@autopurlieu i just bought this deful 389A machine and wanted to know how to set it up out of the box, as I heard you had to fix a few things on it in order to cut properly
I saw that you put something under the key, what is that for?
So it won’t sit too low. If it sits too low, the top layer gets flat/flush on the holder. It will cut the holder.
Great videos! Just got the same machine. Tried to cut my house key #68 and HY17 ( Hyundai key), cut 5 key total and none of it work. Just wondering what bit do you recommend using for both? Salamat po!
Maski yung house key doesn’t work?
When you say doesn’t work, it won’t turn to lock or unlocked ?
Make sure na align na align sya . Pati yung depth
@@autopurlieu ayaw sya mag turn. Maybe I’m using the wrong bit and tracer. I’m new to this maybe I just need more practice. I love your videos. Salamat po. Rey form Reno Nevada
@@RPdesign71 mahirap talaga pag house key. Kc hindi sya made for that kind. “Laser high security @ type key sya. Tulad sa video ko. Yung flat parang pang honda.
MAs maliit na bit and probe, MAs accurate . Kaso, dapat dahan dahan. Kc madaling maputol. Yung bit at tracer dapat match ang size
@@autopurlieu I was able to make two house key :). Tried to make HU100 key for Chevy Cruz ( laser cut), wasn’t successful full. Felt like the bit was worn down. Cuts were not smooth. I’ve only done about 10 keys on this bit, how long do they last? Thx
@@RPdesign71 depends on how you use it. You must cut it slowly a little by little so it won’t worn out easily . And maybe replace the cutter with better quality . China made kc
Which key is best pital or loha
I means duplicate or original
After we lost the key
They would be the same
@@autopurlieu local duplicate key handle lock ko khrab kar deti hai
@@POKEMONGOEPISODESHindi I am sorry, I am not fully understanding your question
Duplicate key model for honda civic? 5:04
I just got my key made a hour ago why is this on my suggestion I didn’t even ask how they cut them
Hahahaa I have no idea brother
You know your phones is listening all time and can surprise you by such unexpected spying results . Isn't it terrifying , gov is spying on people by using their cellphone.
Your phone has a microphone, it listens to everything you say, ever seen adds of something you've talked about on Facebook, Instagram etc? That's why.
You share your location with google?
Maybe you googled the key cutting place you went to or called them, phone listens to your calls and knows what you search for
Where did you buy the keys that are not yet cut ?
Local key distributors
@@autopurlieu thank you man 🙏🏿
Hi! I’m kind of interested learning skills such like this. Do you know a store located in the PH you can recommend for me to buy tools like yours? Thanks.
Where in Philippines are you?
@@autopurlieu Thank you for the swift response. I’m from Leyte po. Ormoc city.
@@SaltPapiii boss, Wala ba nyan sa Lazada or shoopee?
@@autopurlieu May nakita nman ako kaso im kinda hesitant kasi. Yung ibang stores, iilan lang sales. Concerned ako baka ma scam.
why are these keys called 'laser cut'. I don't see a laser involved in this process.
Donde queda la parte del la programación
Check out my other videos. I have plenty of videos how to program. Most Honda are almost the same process of programming (Honda Pilot / Accord / Acura )
Start a note that tall women die What's the Tory of D Wales
Is this a chinese machine would this work to cut keys in the uk please ?
What kind of keys do you have in UK? This is for high security blade key, will also work on regular side key blade
@@autopurlieu transponder keys ? i just need to get a programmer and get the machine so i can learn to do it myself struggling to find a cheap programmer for the uk
Iska price kya he
Hi Guys
Pero las llaves están al revés
What backwards ? Need cut. Both sides lol
hi, can the DEFU 368A cut Gm key,s. thanks
Yes
@@autopurlieu cheers
Hey i started following you because i found this interesting... if u dont mind... whats the name of that machine? I would like to buy one because im the guy that loses keys like crazy lol
It’s a DEFU vertical manual key curing machine
@@autopurlieu thank you so much brother i appreciate you and i will continue to like your videos because it is very helpful. Thank you again!!!
@@capitalerose6410 I appreciate all your support 🙏
Where do I get one?
eBay or alibaba
إسم الماكينة أخي
What is the name of this machine? Can I have a link to buy?
Defu on ali express
Can this cut hard iron
No it won’t .
@@autopurlieu thanks
@@mosestm1099 no problem . Trust me I tried it hahaaa
Broke my cutter lol
@@autopurlieu ok good information
Prce in kenya
Sorry I’m not a seller
Invited by Jocelia Ugbamin
Gringo wey sustituye las tuercas por las mariposas naranjas de plastico
Your soap address
Price in Bangladesh
$1000
I need a duplicate key. ... your address.
For what car year and model?
@@autopurlieu R15 V3
@@angrydetapul7503 what is that lol. A bike ?
@@autopurlieu yes
@@angrydetapul7503 go to your local locksmith. They can do it for you. I will need your bike to program it
Contact details
Facebook page “auto purlieu”
Very bad machine not recommended
It’s actually not bad for personal use or back up manual machine
totally not accurate, have got day
Nice
👍🏽
done