Installing A Cheap 2JZ-GTE And It DOESN'T FIT (And Leaks A TON Of Oil)
HTML-код
- Опубликовано: 7 сен 2024
- Subscribe to Wrench Every Day ► bit.ly/2D4iSp8
Follow us on Instagram ► / wrencheveryday
------------------------------------------------------------------------------------------
Today we are installing our cheap 2JZ-GTE and it doesn't even come close to fitting. Not to mention, SOMEONE forgot to drain the oil...
------------------------------------------------------------------------------------------
Questions? Comments? Business inquiries? Email us at iwrencheveryday@gmail.com
------------------------------------------------------------------------------------------
Twitter ► / wrencheveryday
Instagram ► / wrencheveryday
Tavarish on Social:
Instagram ► / therealtavarish
Facebook ► / asktavarish
Twitter ► / therealtavarish
Jared on Social:
Instagram ► / jaredpink
Twitter ► / thejaredpink
I love how Tavarish asks a question and Jared instantly goes into full professor mode.
He reeeeeealy understands cars.
Jared is a fantastic addition to this channel.
They're a great couple. Love watching these guys
Dude is a 2JZ sicko
Ya and they make them dirty
Oil spill everywhere
Normal people: *put a bucket below *
RUclipsrs: " wow that’s a lot of oil! "
When things get tough, you make it fit. Good life advice right there.
When there's a will there's a way.
The wife hates that
My brain started to think about weird thing
@@the_law2145 you don't say
@@getchasome6230 LOL
Travarish: No, we are not gonna to that are we?
Jarred: Oh, we are!
I almost choked on my food when they said that... hahaha
Eyes wide open...OHHH we ARE !! LOL
@@yukiotakata this is like the third time jarred said something like this and it is still funny
... the weight distribution with the engine like that is going to be horrific. not worth. just go through the proper effort of moving or swapping the trans.
I read that as he said it
Its still leaking earl. So... Im guessing the 2jz swap was meant to be
jared is literally a wizard of all cars, his knowledge is insane
Frankie Lord * the car wizard would like to know your location *
Just change the transmission and simplify the whole damn project. Still gonna be a sick ride. Love this channel guys.
Or they can keep that transmission and get a shorter driveshaft so the engine can go back more against the firewall cause they don't need it that far forward and its going to throw off the balance of the car and make it more heavy in the front.
Yeah just go CD009
Sometimes spending the extra money saves a crap load of time. And time is something you can never get back, you can make more money.
@@opie7afe I agree to the extent when someone doesn't have the money, then relies on their skills to make it happen
William gates i get that for sure..im restoring a 68 mustang with not much money, obviously parts are needed but not paying anyone to do any work on it.
If you use a 1993-2004 xterra frontier pathfinder 2WD 5 speed transmission its the same transmission you have now but just 4 or 5 inches short to shove the 2jz further back and yes they're just as strong as what you have now.
🙏👏👏👏👏
And all the wrong gear ratios
@@insane320 you can swap gear guts and just swap outputs lol
Gear ratios are screwed up probably tho
Finding a vg33e or vg30e 5 speed isnt easy lol
Seems like you’re creating way more work figuring out the rad/intercooler/mounts/hood, etc. when all you need to do is take the driveshaft out and shorten it 3-4 inches lol. Maybe I’m missing something lol
Shortening/ balancing the driveshaft is not much money either..but the other issue i think is the oil pan clearance.
I thought he explained that it would be less trouble, less fabrication, if the transmission was a direct bolt in . There for that is the basis for setting in the transmission and allowing the engine sit forward. However it forward a bit too much.
Not to mention weight bias.
Watch JRGo crossed this bridge on his very awesome and entertaining "Rolls Smoke" LS swap that is now playing. And you will notice he had all kinds of highly skilled buddies at his disposal to weld and fabricate and do what it took to mount the transmission. I dare say Tavarus is not fortunate to have tthat nor skilled enough of a car guy to make short work of something so labor intensive. Jared is very very good however.
"Measure twice, cut once!"
😂👍🏼
carnage6ar that’s how I was taught to work on cars
Cut away! dont think about it!
I live videos with Jared! Freddy, you finally found the greatest possible companion! Cheers from Russia))
Suddenly this channel has become factful and professional. I hope jared gets paid by the hour for all the info and resource he brings to the table
Says : "everything will go fine from here"
Realises nothing fits in as planned
But then again,the optimism of these guys make this content so fun to watch.
Sorry Dude, Jared is bringing this channel new life, the moment he goes Han Solo I'm out!
Jared's undying sense of sarcasm brings out the best in Tavarish. This chemistry is so awesome.
Man be nice to Jared. He's a good man and friend to you, seems very loyal like he'd truly have your back if someone was talking Shiate about you. Those kind of people are rare nowadays brother Fred. You're a good man too Freddy. I love your attitude and kind outlook.
Weight distribution with the engine that far forward, 90 front - 10 rear. Seems like a great idea.
This is very quickly becoming my favorite RUclips automotive channel.
Florida black bears live mainly in forested habitats, and are common in sand-pine scrub, oak scrub, upland hardwood forests and forested wetlands. Black bears in South Florida are the only American black bear subspecies to live in a subtropical region.
Jared is a genius.... Eddie is quite a character. Perfect duo on projects..
I've been watching Tavarish since he bought that Aston from Hoovies, really enjoyed all the content since, but you guys together make a good duo ! Funny and entertaining. Well done !
You know..I started watching tavarish ep one of the fire damaged Lamborghini. I enjoyed ever since. HOWEVER, Tavarish and Jared together? So much more enjoyable. Love their dynamic
How about: " Jared needs his own Channel" Dude your killing it!
That’s why I gravitated to hot rodding Chevys many moons ago even if I preferred other brands over the years for daily drivers or specific functions , lots of interchangeable parts among the brand , especially transmissions.
Man, I love this channel. Really loving the content. I really like Tech Time with Jared. I'm learning so many little details.
16:40 Florida man invents 2jz terror tube
They should put an alcohol or nitrous dump into that dump pipe. Just to make that flame a little higher. :)
Just when I thought the project couldn't get crazier.
I wouldn't like being a passenger then with the windows down... 😷😂
I heard billet and and suddenly thought I was watching a rob dahm video
Rob dahm does have the copyright on billet. He should sue.
These two are some of the fine examples of best friends out there.
Rob dahm: *did someone say billet?*
Rob dahm: if it ain't billet I dont want it... 🤑
You Guys creating something really big... the combination of Tavarish and Jared boosting this channel. ..
*pulls pressure plate out of box*
Jared: "here's the clutch disk and alignment tool..."
Man I love these two together A LOT!!!
Looks like you guys need a $200 5-spd BMW gearbox and Collins adapter & coolerworx shifter. You can move that sucker back to where you need, replace the front sump with a rear one and you're GOLDEN! Skip building all that complicated nonsense up front.
Really digging this channel and Jared’s knowledge of 2J’s is impressive.
That being said, I would love to see a build involving Japan’s OTHER inline 6, the Nissan RB.
For the Radiator solution, I used a similar front (ahead of core support) setup when I swapped in my RB26. Not to self-promote, but if you check out EP17 of my swap vlog, I show the rad that I went with. It was a C&R Racing dual-pass rad that is approx 13x24, which fills that entire front space perfectly. And SPAL supplies the electric fan and cowl in the kit. Lemme know if you have any additional questions. Here or IG.
Kalvin's garage did the swap, try reaching him out for some info. I love how this car is gonna look with that body kit and also having a 2JZ .. whoosh
Yea i just made the same comment! Kalvins build is really well done!
Someone has been watching cleetus McFarland with that exhaust setup
Jared needs to finish the Bentley!
7:59 What the heck is that noise!?
Aidan MaKinster you’re winning at life 😂
I would like but you have 69 likes so I'm not gonna ruin it
i hope this channel grows and keeps the setup as is right now ♥️
Jared is the car guru he is a wealth of knowledge i like that guy learned so much from him
I seen a 1JZ fit in the 300ZX with out much issue and they're about $1000+ cheaper than the 2JZ. You should have got a rear sump for that engine and moved it back. What I love about the 1JZ-300ZX combo is that the 300ZX now has plenty of room under the hood to work, Nissan should have went back to the straight 6 when they came out with the 1990's 300ZX.
Not sure how far behind we are or if there are other plans. If it's possible try swapping the 2JZ engine mounts from side to side. It looks like they might angle back over the original mounting points better.
I got there now... Jared is more gripper than a sleeper!! Omg give us more of that stuff!!! lol
I was reluctant for some time, but it's official now: These two are my favorite couple in the internet!
I thought you gave up on vlogs Freddie. But I see the "Wrench Everyday” podcast channel is now the "Tavarish” channel? Glad I found you again!
We're not going to be burning up anything are we!. Jared: Oh! We are! Lol🤣🤣
The z32 chassis is a front engine mid Mount set up. Having the engine in the front message up its balance. Short in the drive shaft set the engine back And it might actually handle like it's supposed to.
You two are awesome together. Really love watching you guys work and explain what you're doing and why.
Side exit fireballs are a badass idea!!!
I would run a hood so you can run in the rain if it happens. Remember driving lambo in rain.
Also you can mess with the front bar an chop it up and fab around everything
They should fabricate a polycarbonate hood with a big clear cowl bump.
I want to be jarreds friend so bad he seems like the nicest guys ever and honestly one of the well rounded mechanics ive ever seen
Man I laugh so much listening to you two! (I'm a gripper, not a slider) hahaha
BUMP THIS COMMENT SO the Guys read this!!!
Do not cut the front upper radiator support, Regardless if you put it back with bolts it removes rigidity from the front of the car. The 2JZ CAN fit with modified mounts and keeping a normal ish sized radiator. I have a friend who has done this swap and it looks and functions phenomenally. He is making close to 800hp at the tire. I have owned 4 300zxs, If yall need any help hit me up I will be glad to help.
BUMP
Freddy: check out my new floor!
2J: ima ruin this man’s whole career
I wonder if the transmission tunnel would interfere if you shifted the engine back farther? At that point it would be easier to just go cd009. Trying to take notes for my build.
Really enjoying this series, and the two of you are really funny together. Plus I’m learning too, who’d have thunked it? 🤷♂️
My favorite thing is Tavarish is constantly surprised by Jared has planned
Colins trans adapter for the z32 trans is problematic. You kinda have to mix and match some stuff to make it work
for radiator question i have a idea: if you are going to make it streetable then go with your thoughts,but if not then why not to rock a rear radiator setup,that will clear up front and give room for activities,while shifting weight back which makes car sit straighter not lean towards front
14:46 - I seriously thought that garbage can behind Jared had your name on it, Freddy....
Wrenching every day is better with a partner. I had a 2005 Kia Optishit that started falling apart at 125k miles. Everything under the hood was meant for tiny people to work on. Having a skinnier partner in grime made it a lot easier and more pleasant to take apart and replace damn near everything but the engine.
It’s not leaking oil; it’s sweating horsepower
9:59 "all right let's take that out of context" xD xD
Love that Jared chronically out "Smart Arses" you! You could get a bit more flexibility on where then 2JZ will sit; I believe the upeer pana nd sumpr from the Lexus IS 300 is forward sumped- I know of an IS 300 that some "Stalians put a Toyota V12 into, and it required either a compatible chassis (Toy 5L V12 is available forward sump only and no other pan set will bolt up) or a dry sump (other "Stralians blew that away by CAD- made an upper pan that fit the V12, and shifted the sump enough to fit it into a Supra!). At any rate, a look through a Toyota junkyard might be in your future! Most Toyotas and Nissans under the skin re use the same parts or parts closely derived from what they have used n the past- I suspect there is a bolt in front cross member for Earl (from say an S30 or S31 Z Car) with rear mounted R&P. I may be wrong- I am not as smart as Jared, and unfortunately make as many as three mistakes in a year. This year's New Years resolution is to get that down to two; I think I am going to have to cheat- only counting the bad decisions when I get caught out! There is about an inch and a half, make that 35mm, you can and need to get the 2JZ back. It will simplify much afterward; this swap (no, I don't know the details) has been done before, and on YT. When/If I find it I'll post it too you!
8:00 the sound of my people
I thought the 1jz in my is200 was far forward but this is art 😂
Jared is still so much better than the old guy. Atleast he doesn't JUST complain
Jared knows his stuff.
I like these two. They remind me of an American version of Project Binky. I bet the car turns out just as awesome.
This car is gonna be so badass when it's done, love it!
Tbh, I had an unsprung 6-puck clutch in my E36 and daily drove it just fine to be honest. Just gotta be gentle. I put it in because I wanted the clutch to be ready to make 3-400 hp and take whatever abuse I could throw at it... Of course, now that I've actually got enough money saved up to make 300hp, it's probably time to replace the clutch again...
Only thing that bothered me was that the pedal is suuuuper heavy but yeah, whatever.
Hi Jared and Tarvarish nice video 📹 and workmanship i doubled check my work and rememberd to do Tarvarish name !!!!
Gotta love that 75/25 weight distribution to make handling extra interesting. ;)
'Who would've known' that the trans adapter people knew exactly what they were on about.
Honestly u guys make the best partners , hilarious to watch while knowledgeable:)
Do a duel Mishimoto radiator set up. One on each side, behind the headlights with some ducting forcing the air to both rads
9:55 😂😂😂😂😂 my record stands at 4 to 5 times going in and out of the hole.
I seriously don’t know how the two of you get anything done! Lol 😂
I want to ask you for something. Can we get a build where Jared is in charge. Let him make all the decisions of what to do because I feel like it would be badass what he would come up with.
7:59 "What the heck is that noise?" 😂😂😂
You should get a cowl hood and mount it with hood pins instead of a normal latch
7:58 this whole episode in a nutshell...
This reminds me that I'm still waiting on the Volvo ghini video. Peter is struggling a bit to fit a v10 mid engine front in a Volvo. The gearbox didn't fit in he's late so he cut it off with a angle grinder to shorten the gearbox.
A fender exit exhaust is a cool idea when your fenders aren't plastic. Not so much when they are. lol
Lonely and forgotten Bentley in the back ground.😔
That's why Colin's Adaptors said go 6 speed. They probably meant CD009
Also, the 2JZ DOES fit normally, no need to remove the rad support
“A twisted tree never straighten up”... Earl Leaker 😂
Tavarish and Jared!!!!! Drop that 2jz on the Mk3 Supra!!!!!!!!!!
I really can't wait to see the finished product after all this work.
You can use a Twin Turbo clutch in the NA Trans, You just gotta Grind a little and i do mean just a tad bit at the bottom of the NA trans! And BTW, You Said that backwards, The 6 puck is the DISC and the other is the pressure plate! Not disc!
Freddy, you need to complete that supra!!! Make it look nice and put it on the dyno and get a nice tune!!
This car deserves it.
Completely unrelated, but why have some places in the English speaking world started saying “Reached Out”.... when it’s far easier just to say “Contacted”???????
Keep the great videos coming guys...
Very stoked for build progress
Make the brass exhaust heat shield the Wrench Everyday nut logo! That’d look sick!
Honestly it fit a lot better than I expected.
Good morning everyone, Happy Tuesday!
Taking off the cam gear guard cover could help a little. Maybe have just the cam gears projecting from the hood
Guys. It's going to be great, but you should really move the engine and trans back. Having it that far forward will throw off the balance of the car and it is obviously over complicating your cooling situation. The only reason I could think that it would have to be that far forward would be to clear the front subframe, and if that is your reasoning then carry on. If you have space to move the engine back, then please do. It will look a lot better with the hood off if the engine fills the bay in a more ideal fashion. Having a drive shaft made would save you so much time on the cooling, unless you also have to cut up the front subframe.
No matter what, this is a cool project. Please finish it.
You NEED to open up the trans tunnel or do something else to get the enigine back. You MUST get the engine back. If you don't it will handle like a shopping cart and may other problems.
😂😂😂 not the worst, I once took off an oil pan, full of oil, and promptly spilled it on the floor.
You should do a custom cowl hood on it, it would give it a whole different look. I think it would look pretty sweet.
I agree. In clear polycarbonate.
@@MessalineApghar that's a good idea. Clean up the top of that engine, an polish the turbo housing up. Give it a Blasphemi look.
Make questionable choices, and double check your work!
I like that.