its sad to say that I've owned a Tonex pedal and Amplitube for almost six months and just learned more about both of them in the 29 minutes it took to watch your vid. Great break down and explantion of the software, thank you!
Love that plate reverb!!! I have tried the Tonex CS version, & it is awesome. I’m going to get the pedal version since it also comes with the full version on the software. Can’t wait to get it!
Perhaps the most intuitive walkthrough video on RUclips on ToneX. I learned more after watching this video then what I’ve learned in one month. Thank you!!!
Thanks for sharing that Cameron preset, I found it and it’s now my fav amp! However, I wanted to learn how to share Tonex amps with AmpliTube on iPhone and this is completely different.
OK so I use both amp modeling and guitar modeling when playing out and recording...I have been using a BOSS SY 1000 to do this playing in the cover band I am in, and it sounds just OK to me...I use guitar modeling because I need the capability on some songs to switch to alternate tunings, acoustic guitar tones, etc...I have also experimented patching in an amp through the aux in and out, and it works, but it is just not an on the fly solution...but this, with it's midi capability, I could connect it midi, and have that great tone, and then still have all the effects that the SY 1000 offers....hmmm....probably going to get one....
The main problem of all modelers like this is latency. Imagine sending it to the FOH main mixer through a 50 meter xlr and then sending it back to you from their monitor out. My question, how's the latency sir especially doing solos?
Definitely the best ToneX video I've seen on YT. Thank you Perfecto, this video added me as a Subscriber! I was wondering if its possible to still connect the ToneX pedal into my tube amp in order to use just the power amp or speaker, via the send / return or 4CM or would only a FRFR type setup work in this case? Thanks for the amazing post.
I have a suggestion, if someone like me only has the basic version because i know nothing about this, can you PLEASE show how to get into each area? I only have one amp in mine but how do you see the right hand panel with all the packages? Does that only display if you buy them? What about demo's or where to choose the amps?
Like how in the hell do you make it sound so good like that , whats the trick my sounds arent this good , they are scratchy and the distortion is not very defined.
Great tutorial, thank you. Where can I find cabs like the ones you've got loaded in? Like the ones you had as options when you did the TC-100 High Gain amp model.
That’s great stuff, but why capture a cabinet as part of a amp tone capture if you are just going to replace it with an Amplitube cab? From a different perspective, considering that Amplitube offers so much flexibility in tweaking it’s cab parameters, why even bother capturing a personal cab that is going to be non-tweakable? I’m sure that you have a great reason that I am not aware of. Regardless, that was a very informative video. Thanks
I messed up the mic placement and was gonna redo the capture, but since ToneX can separate the amp and cab I decided to feature that so people don’t get intimidated by the Tone Capture process
Hi Sir Perf!!! Good Day! I already have a tonex pedal and looking at purchasing valeton gp200. I would like to know if you can control tonex with valeton when switching patches (different amps between patches). Hoping you could put out a video on how to do it and is it a good pair. Hoping to hear from yoh soon. More power Sir Perf!!!
Hey Perfecto. How are you? Happy 2023 to you man. Nice video! I dig this Tonex Capturing Thing. I have uploaded a few Captures on Tone Net. Check them out. You will find my trusty JCM 800 from 1983, a Fender Super Reverb 1974 direct and a Room Sound. Then my EVH 5150 and 2 Versions of a Ryra Klon Pedal. You can find them if you searching for "String Theory". Tell me what you think. Hug from Germany. Carsten ✌🏼
As I understand you just can't upload the pedals from Amplitube to Tonex Pedal... but is it possible to transfer the whole preset from Amplitube (all signal chain with overdrives, amp, cabs, delay, etc.) to Tonex Pedal? It would work as a capture of the virtual tone just like the real one by capturing procedure....
Beautiful video, thank you! I have seen you are able to load in amplitube some tonex ampli and cabs: Is it possible to load also some Preset of Tonex ? many thanks, Enrico
What is the quickest way to switch between presets or even pedals using amplitube? Like if you are playing live and don't want to click with your hand to turn off the pedal or change the sound without missing a beat?
Is there a reason when I pull up a tonex amp in amplitube it's so much quieter than an amplitube amp? Seems strange , doesn't seem to mattress which one I pick. Have you experienced this? Thanks
so If I import a preset from the tonex pedal, tweak it in amplitube 5.5 can I then reload the tweaked preset back into the tonex pedal, if so I can't figure out how....any help or answer would be appreciated
I show my ToneX audio interface settings at the beginning. My tone capture pretty much feels like the presets that come with the software as far as latency goes
@@OfficialPerfectoDeCastro User the ASIO drivers whenever possible combined with low buffer settings on the interface settings tab his was 128 I believe. Mine works fine with VST drivers and 128 buffer settings in stand alone. It's when you build a bigger project with samples being trigged on tracks in your daw it's a problem balancing the buffer settings for sample track playback with near 0 latency. Guitar plug in's need low buffer settings, Sample tracks will need big buffer settings but you can always freeze those to allow setting low buffers for near 0 latency. If you playing ToneX or Amplitude stand alone it's not an issue set the buffer low.
How does this hook up just for regular playing, not captures, ?? I’m completely new at this. So I need an audio interface to plug my guitar into then into computer then into computer speakers or guitar speaker cab?? Am I close?
Okay but how does it sound nowhere near the same when I use ToneX? The quality is literally night and day and it's the same with any other plugin out there. I watch youtube videos, they all sound amazing, but when I use them they sound super fizzy and digital. Any ideas?
@@OfficialPerfectoDeCastro So my setup is as follows: I am using a PRS Tremonti SE with Seymour Duncan pickups into a Focusrite Scarlet Solo. As headphones I am using the Sennheise HD558. I have a pretty powerful PC as well to handle the processing load on the CPU.
@@RavenflashLP Hmmmm.... the only thing I could think of is perhaps you have an audio enhancement or audio effects applied to your Windows sound or speaker properties. If that's not the issue then play around with different IRs/cab sims. The Virtual Cab is pretty good and you can play around with mic placement to dial in tones. As you can see my ToneX EQ settings are pretty conservative and I don't really add much in terms of post processing.
Hey this is great. I have a question, thank you for posting this. I have both the TONEX and Amplitube 5 on my ipad 10. I have the iRig HD2. Is there a way I connect the iRig to the spark amplifier? Thank you.
@@OfficialPerfectoDeCastro It doesn"t work. I am connecting my cable from the guitar to the guitar port of the iRig. Then another cable from amp icon of the irig into the amp. I can't disable the spark effects.
@@AngelMartinez-qs3cf not familiar with the Spark but you should be able to build and save a preset with all the amps/effects turned off. The other (and possibly less fussier) solution is to go out of the iRig headphone out into the Spark Aux in
@OfficialPerfectoDeCastro Hey thank you so much. Sorry for the many questions. On Tonex, I have been saving presets, but I don't chorus pedal effects. I am still trying to figure how can I input the presets in amplitube .
Hey man, im use the tonex but if i dont hit the strings of my guitar in get a Chamber/buzz sound every 10sec what can it be? Somthing with my tonex of interface? Nee help.... thx!
@@OfficialPerfectoDeCastro Thanks for the reply, I'm looking for some kind of direct unit that sounds in my headphones. I have to do most of my playing through headphones and only once in a while when my neighbors are gone, go loud.
I purchased tonex max software, and all I can do is sample the tones. Can’t play them at all. The manager says version 1.2.5 is installed. But right now it’s a digital paper weight. Do you have any idea of what I’m doing wrong?
Digital garbage. Shreds your ears with digital noise. Only sounds good when you forget what real amps sound like. As soon as you A/B it against the real thing it doesn't compare.
its sad to say that I've owned a Tonex pedal and Amplitube for almost six months and just learned more about both of them in the 29 minutes it took to watch your vid. Great break down and explantion of the software, thank you!
This clarified some after thoughts i had after ordering the pedal, thanks bro really good stuff.
Great demo of the software, you made it vert easy to follow along. Brilliant playing as usual!
Love that plate reverb!!! I have tried the Tonex CS version, & it is awesome. I’m going to get the pedal version since it also comes with the full version on the software. Can’t wait to get it!
this video unlocked what I needed to know about toneX....thank you!
Awesome, enjoy!
Perhaps the most intuitive walkthrough video on RUclips on ToneX. I learned more after watching this video then what I’ve learned in one month. Thank you!!!
Great playing and tone Mr. DeCastro!
Thanks for sharing that Cameron preset, I found it and it’s now my fav amp! However, I wanted to learn how to share Tonex amps with AmpliTube on iPhone and this is completely different.
Right now you can’t share Amplitube presets that have ToneX in the chain
Sounds fantastic. Thank you.
The lead tone at 22:22 is killer
You can tweak that Texan coffee and make it much better. That Minimum Dirt sounded Great, and the Deluxe after it sounded good too.
OK so I use both amp modeling and guitar modeling when playing out and recording...I have been using a BOSS SY 1000 to do this playing in the cover band I am in, and it sounds just OK to me...I use guitar modeling because I need the capability on some songs to switch to alternate tunings, acoustic guitar tones, etc...I have also experimented patching in an amp through the aux in and out, and it works, but it is just not an on the fly solution...but this, with it's midi capability, I could connect it midi, and have that great tone, and then still have all the effects that the SY 1000 offers....hmmm....probably going to get one....
Very useful video. Thanks.
Great explanations,thank you so much 🤟
I'm new here. Great job, I got ToneX on the way. THANKX Perfecto
See what I mean? When I purchased the Tonex software, NOWHERE on the Tonex page did it say I was required to have a Tonex capture box > $200.
You're not required to buy the ToneX box, you can use the reamp output of your audio interface or any other reamp device.
Jr.-- is that you?!
Thanks you saved me the trouble :)
I think it's perfect review :)
I do not see Tonex on the option on amplitube. I have amplitube max 5 and Tonex free 😅
Thank you. That was very great
Glad you enjoyed it!
The main problem of all modelers like this is latency. Imagine sending it to the FOH main mixer through a 50 meter xlr and then sending it back to you from their monitor out. My question, how's the latency sir especially doing solos?
Thnk u 4 a gr8t dmo vid. ❤
Definitely the best ToneX video I've seen on YT. Thank you Perfecto, this video added me as a Subscriber! I was wondering if its possible to still connect the ToneX pedal into my tube amp in order to use just the power amp or speaker, via the send / return or 4CM or would only a FRFR type setup work in this case? Thanks for the amazing post.
Thanks for the sub! Yes, just disable the ToneX cab when plugging into a power amp/efx return
@@OfficialPerfectoDeCastro Thank you so much!
I want the pedal platform of this tonex so bad!
I just noticed sir, is the input signal clipping.
I have a suggestion, if someone like me only has the basic version because i know nothing about this, can you PLEASE show how to get into each area? I only have one amp in mine but how do you see the right hand panel with all the packages? Does that only display if you buy them? What about demo's or where to choose the amps?
Like how in the hell do you make it sound so good like that , whats the trick my sounds arent this good , they are scratchy and the distortion is not very defined.
Start with the EQ centered and not extreme and also watch the gain settings when stacking distortion
why does everyone skip the installing process for pc, 5th how to tonex one and nothing
Great tutorial, thank you. Where can I find cabs like the ones you've got loaded in? Like the ones you had as options when you did the TC-100 High Gain amp model.
Thank you bro!👏😄😄
That’s great stuff, but why capture a cabinet as part of a amp tone capture if you are just going to replace it with an Amplitube cab? From a different perspective, considering that Amplitube offers so much flexibility in tweaking it’s cab parameters, why even bother capturing a personal cab that is going to be non-tweakable? I’m sure that you have a great reason that I am not aware of. Regardless, that was a very informative video. Thanks
I messed up the mic placement and was gonna redo the capture, but since ToneX can separate the amp and cab I decided to feature that so people don’t get intimidated by the Tone Capture process
Hi Sir Perf!!! Good Day! I already have a tonex pedal and looking at purchasing valeton gp200. I would like to know if you can control tonex with valeton when switching patches (different amps between patches). Hoping you could put out a video on how to do it and is it a good pair. Hoping to hear from yoh soon. More power Sir Perf!!!
Can i connect tonex to amplitude in android phone for guitar fx?
Hey Perfecto. How are you? Happy 2023 to you man. Nice video! I dig this Tonex Capturing Thing. I have uploaded a few Captures on Tone Net. Check them out. You will find my trusty JCM 800 from 1983, a Fender Super Reverb 1974 direct and a Room Sound. Then my EVH 5150 and 2 Versions of a Ryra Klon Pedal. You can find them if you searching for "String Theory". Tell me what you think. Hug from Germany. Carsten ✌🏼
I will check it out! Thanks, hermano! Hope all is well!
First comment..pa shoutout next upload idol..
Hello 😊
Can you add your own pedals?
Is this pedal stereo in and out? It looks like only one input.
Great video.
Mono in, stereo out. You can load any amp/pedal you capture with the ToneX app
Buen tutorial pero si lo haces en español te lo agradecerían miles de personas, gracias
As I understand you just can't upload the pedals from Amplitube to Tonex Pedal... but is it possible to transfer the whole preset from Amplitube (all signal chain with overdrives, amp, cabs, delay, etc.) to Tonex Pedal? It would work as a capture of the virtual tone just like the real one by capturing procedure....
Tonex is amp only, no delay/modulation
My presets are not working but tonex works in amplitude. I can't figure it out
Beautiful video, thank you! I have seen you are able to load in amplitube some tonex ampli and cabs: Is it possible to load also some Preset of Tonex ? many thanks, Enrico
Yes, you actually load a ToneX preset in Amplitube. If you want to use Amplitube cabs, disable the cab in the ToneX block or load an amp only preset
Thank you! How can you do to load a preset? I just manage to load a tone model… many thanks again
What is the quickest way to switch between presets or even pedals using amplitube? Like if you are playing live and don't want to click with your hand to turn off the pedal or change the sound without missing a beat?
Look into a bluetooth footswitch like the IK Blue Board
Can I insert the Amplitube signal in tonex pedal?
No, treat ToneX as a virtual amp only
Is there a reason when I pull up a tonex amp in amplitube it's so much quieter than an amplitube amp? Seems strange , doesn't seem to mattress which one I pick. Have you experienced this? Thanks
so If I import a preset from the tonex pedal, tweak it in amplitube 5.5 can I then reload the tweaked preset back into the tonex pedal, if so I can't figure out how....any help or answer would be appreciated
Use the Tonex App to load presets onto the pedal
@@OfficialPerfectoDeCastroso if I tweak a tonex preset within amplitube how do I get it back onto the pedal with the effects?
The Tonex pedal doesn’t hold Amplitube effects, only the amp tone captures
Is captures done on this software downloadable to the new Tonex pedal?? And does this software or access to it, come with the Pedal purchase??
Yes! I loaded this capture and used it on my ToneX pedal video
Thanks for the vid!
Question? How are you playing the completed profiles with zero latency?
Thanks!
I show my ToneX audio interface settings at the beginning. My tone capture pretty much feels like the presets that come with the software as far as latency goes
@@OfficialPerfectoDeCastro User the ASIO drivers whenever possible combined with low buffer settings on the interface settings tab his was 128 I believe. Mine works fine with VST drivers and 128 buffer settings in stand alone. It's when you build a bigger project with samples being trigged on tracks in your daw it's a problem balancing the buffer settings for sample track playback with near 0 latency. Guitar plug in's need low buffer settings, Sample tracks will need big buffer settings but you can always freeze those to allow setting low buffers for near 0 latency. If you playing ToneX or Amplitude stand alone it's not an issue set the buffer low.
How does this hook up just for regular playing, not captures, ??
I’m completely new at this. So I need an audio interface to plug my guitar into then into computer then into computer speakers or guitar speaker cab?? Am I close?
Yup, interface into computer then app then computer speakers
Hi Perfecto, one questions...i have Tonex SE, I can import profile to another account? My friend have Tonex MAX...
Yes, you can. Probably the easiest way to to upload to Tone.net then download to the other account
@@OfficialPerfectoDeCastro can you tweak a tonex pedal preset in amplitube then reload the tweaked preset back into the pedal, if so how?
So can I get the modified sound with the delay on my Tonex Pedal for using it live too?
No Delay. Treat the ToneX pedal as a standalone amp
What is the model of this Guitar??? 25:21
ruclips.net/video/JZxXm-C2gvU/видео.html
@@OfficialPerfectoDeCastro ¡Thanks!
Hi i have tonex max i don't know how to upload from tonex to tone net my presets can you help with that .thanks
Can I use my created Amplitude 5 preset up for m,y rig and call it up in the Tonex stomp box and app?
When is someone who is not sponsored by IK Multimedia going to do a video on how bad Tonex SUCKS?
Okay but how does it sound nowhere near the same when I use ToneX? The quality is literally night and day and it's the same with any other plugin out there. I watch youtube videos, they all sound amazing, but when I use them they sound super fizzy and digital. Any ideas?
What are you playing through?
@@OfficialPerfectoDeCastro So my setup is as follows: I am using a PRS Tremonti SE with Seymour Duncan pickups into a Focusrite Scarlet Solo. As headphones I am using the Sennheise HD558. I have a pretty powerful PC as well to handle the processing load on the CPU.
@@RavenflashLP Hmmmm.... the only thing I could think of is perhaps you have an audio enhancement or audio effects applied to your Windows sound or speaker properties.
If that's not the issue then play around with different IRs/cab sims. The Virtual Cab is pretty good and you can play around with mic placement to dial in tones.
As you can see my ToneX EQ settings are pretty conservative and I don't really add much in terms of post processing.
Hey this is great. I have a question, thank you for posting this. I have both the TONEX and Amplitube 5 on my ipad 10. I have the iRig HD2. Is there a way I connect the iRig to the spark amplifier? Thank you.
iRig output into the Spark input. Disable all the Spark effects
@@OfficialPerfectoDeCastro Thank you so much! You're the greatest!
@@OfficialPerfectoDeCastro It doesn"t work. I am connecting my cable from the guitar to the guitar port of the iRig. Then another cable from amp icon of the irig into the amp. I can't disable the spark effects.
@@AngelMartinez-qs3cf not familiar with the Spark but you should be able to build and save a preset with all the amps/effects turned off. The other (and possibly less fussier) solution is to go out of the iRig headphone out into the Spark Aux in
@OfficialPerfectoDeCastro Hey thank you so much. Sorry for the many questions. On Tonex, I have been saving presets, but I don't chorus pedal effects. I am still trying to figure how can I input the presets in amplitube .
so when tonex connected to pc, it will integrated with blok chain amplitube5?
Yes it shows up in Amplitube 5
@@OfficialPerfectoDeCastro so in that video when you doing demo amplitube5 , you using tonex as interface , not using another soundcard?
Hey man, im use the tonex but if i dont hit the strings of my guitar in get a Chamber/buzz sound every 10sec what can it be? Somthing with my tonex of interface? Nee help.... thx!
Not sure I get what you mean but contact IK and send them a video of your issue, they’re pretty good with responding
@@OfficialPerfectoDeCastro oke i will!
White noise for none included presets on free version is not you it’s IK media doing it on purpose
How's it sound through headphones?
Sounds like how it sounds through monitor speakers
@@OfficialPerfectoDeCastro Thanks for the reply, I'm looking for some kind of direct unit that sounds in my headphones. I have to do most of my playing through headphones and only once in a while when my neighbors are gone, go loud.
Is that a Sully behind you?
Yup!
Is it possible to load any presets or plagings from amplitube 5 to tonex pedal?
No, it’s only for amp models
@@OfficialPerfectoDeCastro
Is it possible to load amplifires plagins from amplitube 5 to tonex pedal?
21:22 😂😂😂
16:40
I purchased tonex max software, and all I can do is sample the tones. Can’t play them at all. The manager says version 1.2.5 is installed. But right now it’s a digital paper weight. Do you have any idea of what I’m doing wrong?
Perhaps you can check your interface settings. That's what I needed to do. ASIO works the best
I love the Diezel VH4 amp from amplitube, is it possible to save amps from amplitube on the Tonex pedal and use it for a gig?
You can load ToneX in Amplitube but not the other way around
If they only could transfer it to a stand alone multi effect pedal
Stay tuned 😉
@@OfficialPerfectoDeCastro I will 😀
Are they ??? 🤞🤞✌️✌️🤠
Can't confirm nor deny 🤐
@@OfficialPerfectoDeCastro if they did they would be top of the food chain in the multi pedal world
Saw a Tonex pedal today.
Scandal
why u look like mexican kirk hamett?
Because he's Philippino??? 🤔
Digital garbage. Shreds your ears with digital noise. Only sounds good when you forget what real amps sound like. As soon as you A/B it against the real thing it doesn't compare.
Well, also depends which amps coz not all real amps sound good 🙂