I use different implements/equipment with male/female ends. I actually had it like that when I first got the grapple, but as I acquired more equipment I switched so everything is easily swapped between all my stuff.
Last year I bought a brush hog for mowing my pastures and on one side closest to my building down over the hill there was nothing but junk. I found the remnants of a pole barn like the trusses that was totally rotted. Old chain link fence, kinda rolled up. Then all along there are trees out about 10 feet from the property fence. I found some tools an old cable wire for maybe internet. Then just before I was going to cut the weeds i noticed a braided metal cable without insulation on it. That would have made fun getting it out from under the brush mower. The first time cutting another section was a tire and wheel and so i bumped it with the bucket and the mice went everywhere. This past summer first time cutting i came up to a bicycle frame and frankly don't know how it got there. My 2 little fenced off areas i used my trimmer to cut down and found all kinds of stuff. And then I went over to the next little area i used the trimmer and thought I would use my zero turn mower, well I hit barb wire and of course got it wrapped up in the blades so then back to the shop to remove the blades. I was pretty pissed by then.
I just got a new TYM a month ago and it is set to Celsius. It is driving me crazy! I have not gotten the manuals for it yet so I was waiting. I knew there had to be a way. Thank you!
The temp of tractor engine will rise after you turn it off and let it sit for a little bit once you start it back up it start cooling down once the coolant starts moving. That on all engines that's liquid cool. Thanks for the video
HAY HANK, I GOT THE SAME FEATURES IN MY JEEP. THAT'S REALLY COOL THEY HAVE THE SAME FEATURES ON TRACTORS. I GUESS THAT MAKES YOUR LIFE A LITTLE EASIER TO BE ABEL TO CHECK ALL YOUR PRESSURES AND TEMPS ON THE FLY. I KNEW THEY HAD THAT COMPUTER STUFF IN THE NEW TRACK LOADERS, BUT I DIDN'T KNOW TILL NOW THEY HAVE THEM ON FARM EQUIPMENT. STAY COOL HANK... PEACE...
Hey Hank, how do you change the battery voltage and the hours from metric to standard units? Haha Thanks for the video and God bless you and your family!
Hank, I've been wondering about the celsius to fahrenheit change. Thanks! (I've got my overheating problem figured out..a bunch of stuck grass clippings between the screen and radiator. Had to use my fiberglass fish stick with the hook attached to reach in there and pull it all out. I use my small 18 V Milwaukee blower a lot, however this grass clippings was stuck pretty bad, causing a lot of blockage).
Thanks for another great video. Most interesting. Thanks for showing us those extra functions on your tractor. Nice to have that. White tips on fork lift is a good idea. Can see them better. Neat All kinds of things you can do with your equipment as time permits. Thanks. All for now. Thanks for everything. The Iowa Farm Boy. Steve.
i tired this on my TYMt474 it did not work. i tired low beam and hi beam both. it will not change from c to F. noticed on some of the TYM forums others with newer models say it does not work. there must be another method to swap from c to f on some models any one have another method?
I feel like the headlight light bright setting is bait to get me to comment. 😂. Does it really need to be set to bright. 🤷♂️ kinda strange if so. *Keep on tractoring!*
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Thanks for showing us that. I almost had it, and was thinking about turning the lights on lol.
Keep rocking with all that great Knowledge.
Great info Hank.
In regard to the hydro lines on the grapple.....swap a male and female coupler around. No more zip ties. Then they can only go 1 way.
I use different implements/equipment with male/female ends. I actually had it like that when I first got the grapple, but as I acquired more equipment I switched so everything is easily swapped between all my stuff.
Last year I bought a brush hog for mowing my pastures and on one side closest to my building down over the hill there was nothing but junk. I found the remnants of a pole barn like the trusses that was totally rotted. Old chain link fence, kinda rolled up. Then all along there are trees out about 10 feet from the property fence. I found some tools an old cable wire for maybe internet. Then just before I was going to cut the weeds i noticed a braided metal cable without insulation on it. That would have made fun getting it out from under the brush mower. The first time cutting another section was a tire and wheel and so i bumped it with the bucket and the mice went everywhere. This past summer first time cutting i came up to a bicycle frame and frankly don't know how it got there. My 2 little fenced off areas i used my trimmer to cut down and found all kinds of stuff. And then I went over to the next little area i used the trimmer and thought I would use my zero turn mower, well I hit barb wire and of course got it wrapped up in the blades so then back to the shop to remove the blades. I was pretty pissed by then.
I just got a new TYM a month ago and it is set to Celsius. It is driving me crazy! I have not gotten the manuals for it yet so I was waiting. I knew there had to be a way. Thank you!
You bet!
You've got to be from Vidor to Deweyville.... I assume the prior. That pipeline looks really similar to mine.
The temp of tractor engine will rise after you turn it off and let it sit for a little bit once you start it back up it start cooling down once the coolant starts moving. That on all engines that's liquid cool. Thanks for the video
HAY HANK, I GOT THE SAME FEATURES IN MY JEEP. THAT'S REALLY COOL THEY HAVE THE SAME FEATURES ON TRACTORS. I GUESS THAT MAKES YOUR LIFE A LITTLE EASIER TO BE ABEL TO CHECK ALL YOUR PRESSURES AND TEMPS ON THE FLY. I KNEW THEY HAD THAT COMPUTER STUFF IN THE NEW TRACK LOADERS, BUT I DIDN'T KNOW TILL NOW THEY HAVE THEM ON FARM EQUIPMENT. STAY COOL HANK... PEACE...
Superb video Mr Hank 👍🏼 Your property is looking fantastic
I had a buddy help me with some grapple work.
Hey Hank, how do you change the battery voltage and the hours from metric to standard units? Haha
Thanks for the video and God bless you and your family!
Nice job onthe secret function thanks just got mine 2 days ago .also what brand of implements do you like
I'm a huge fan of Homestead implements
Man, When I cut my "front yard" I'll just steal your video. They are that close. 😂
Hank, I've been wondering about the celsius to fahrenheit change. Thanks! (I've got my overheating problem figured out..a bunch of stuck grass clippings between the screen and radiator. Had to use my fiberglass fish stick with the hook attached to reach in there and pull it all out. I use my small 18 V Milwaukee blower a lot, however this grass clippings was stuck pretty bad, causing a lot of blockage).
Glad it helped👍
Thanks for another great video. Most interesting.
Thanks for showing us those extra functions on your tractor. Nice to have that.
White tips on fork lift is a good idea. Can see them better. Neat
All kinds of things you can do with your equipment as time permits.
Thanks.
All for now. Thanks for everything.
The Iowa Farm Boy. Steve.
Thanks 👍 I always enjoy reading your comments
That bush hog is pretty impressive taking down that brush!
I have really beat the mess out of it. It's holding up really good
That gas pipeline passes right on the edge of my property here in Suwannee county, you in the area?
I heard it runs from the Tampa area to Houston Tx. 😳
You are the man. Was trying to figure that out today.
Right on!
179 is normal operating range, most are 210 degree thermostats
I have a 2019 474HST, this procedure is not working for me?
i tired this on my TYMt474 it did not work. i tired low beam and hi beam both. it will not change from c to F. noticed on some of the TYM forums others with newer models say it does not work. there must be another method to swap from c to f on some models
any one have another method?
I have a tym t353 HST is there trick to turn on the cruise or just press the green button.
Just press the button and let off throttle pedal
What is the Draft lever for on the tractor?
Sets depth for implements such as plows
Марат 👍 😊
MaRaT😊
I did that but why kilometers per hour and not miles per hour... don't really matter though .
Thank God I can chg it
Any way to make the temp stay on the screen?
Yep, just hit the info button and it should stay on
does that work for mph too?
I would assume so
I feel like the headlight light bright setting is bait to get me to comment. 😂. Does it really need to be set to bright. 🤷♂️ kinda strange if so.
*Keep on tractoring!*
Indeed it does. Lol. Ain't that crazy!
Yes because you use the dim switch for miles/kmh
Wow who knew ty 😊 🙏 🏆🏆👴🐕🚜😎🤠🤦♂️
You bet!
Anyone know how to change to MPH from KPH?
lol. It's literally in the video😂
@@hhamilton1970It’s literally not. Changing your Temp to F, doesn’t change your speedometer to MPH. It’s still showing in Kilometers.
Put the light switch on low beam then hold the info button for approximately 10 seconds to change KPH to MPH.