Pahjo Designs ok thanks I’m thinking about doing this to my 93 Range Rover, I also followed you on Instagram on both my accounts @sam.huml and @93_rover
Excellent. Kudo's for the safety reminders, I've seen far too many RUclipsrs ignoring simple safety gear while grinding or using pants and chemicals. Double amputee here. It takes a second to have your life changed.
I've got a 2004 LJ that I'll be ordering 1.5 gallons for. I'll likely have plenty of leftover to do a drop coat for a more even texture. I'm not planning to take it to bare metal because I have no rusting, just removing the clear coat with a 150 grit sandpaper I think. Looking forward to this project. Thanks for the video.
Quick way to clean your gun put the tube into acetone and spray it until it's clean use carb cleaner for the rest works great ,I use raptor a lot great stuff,did my tundra and 3 other SUV with it
I’m very glad I did this. It’s been over a year since I installed it and it’s performing very well! Be sure to visit my blog post for this project as it has more detail. Blog post link is in the video description.
Thank you! It’s an awesome project and well worth it. It has performed very well in salt air near the beach - no issues... I have more tips on my blog as well..
Wouldn't recommend mixing in your Jeep. If you make a mess or knock it over good luck with the finished product! Overall, decent video. Also, wire brush wheel for overall scuffing usually gives a better result.
How did the liner hold up ? I have a 75 jeep cj5 that I just painted the inside tube with Por-15 and was concerned about Raptor sticking . Ill try your method of lightly sanding with 80 grit sand paper before I paint . Great video , thank you .
I am from Venezuela and I would like you could tell me where I can buy the painting but in beige. if you recommend a link. since I only see pure black color
@@PahjoDesigns Food for thought. Next time try not using the sink to clean your materials. That stuff goes back to our drinking water. It needs to be poured into a metal container and desposed of properly.
@@stevenharms338 All waste water goes through a dramatic cleaning process , If you have a floor drain in your garage it ties into the sanitary drain system , which is treat and released . I wouldnt be to concerned about small amount of chemicals you poured into the drain . Stevie boy just wants to bitch !
Yes. I was worried about this as well so I called U-POL and asked them if this would be ok. They said folks did it with a 10 gallon without issue. I rolled the dice and had no issues whatsoever.
I drive with a bimini 99% of the time. I haven’t noticed any difference in sound when I do have my winter soft top, but I don’t think I drive it enough with that top to notice.
do you think it would look okay to do a black jeep with the tan liner, i think it would make dust and sand less noticable than my black interior does now
Yep, that was it. The interior tub doesn’t take nearly as much as the exterior. It was very easy to apply and it holds up well. The hardest part was removing all the old rusted bolts and preparing the floor for the spray. I highly recommend POR15 to reinforce the drivers side floor as well.
Visit my blog for additional tips/techniques and a free digital download for this project. bit.ly/2EiNTvr
Thanks for watching!
Pahjo Designs does that stuff help with road sounds?
I noticed a difference bc of the age of my previous sub floor, but not significant.
Pahjo Designs have you heard of lizard skin? and do you know if you can spray the bed liner on top of that
I’ve heard of it. I’m not sure if you can, but I wouldn’t see why not as long as the surface is scuffed/sanded, it should bond to it.
Pahjo Designs ok thanks I’m thinking about doing this to my 93 Range Rover, I also followed you on Instagram on both my accounts @sam.huml and @93_rover
Excellent. Kudo's for the safety reminders, I've seen far too many RUclipsrs ignoring simple safety gear while grinding or using pants and chemicals.
Double amputee here. It takes a second to have your life changed.
“Gonna let that sit for about ten minutes, while I beat my son in a game of horse” dad level 100
Love it
“While I beat my son....(pause).... in a game of basketball 😂
I've got a 2004 LJ that I'll be ordering 1.5 gallons for. I'll likely have plenty of leftover to do a drop coat for a more even texture. I'm not planning to take it to bare metal because I have no rusting, just removing the clear coat with a 150 grit sandpaper I think.
Looking forward to this project. Thanks for the video.
Thank you for your time, the P.O.R. 15 works well it’s the best and it’s best to spray topcoat when the POR is tacky
Quick way to clean your gun put the tube into acetone and spray it until it's clean use carb cleaner for the rest works great ,I use raptor a lot great stuff,did my tundra and 3 other SUV with it
Jason Christman awesome tip! I’ll definitely use it next time
Can i put sound skin over top raptor liner?
Want to use raptorliner for the rust protection butneed to deal with sound issues on my 67 stepvan.
2:02 And the Jeep gets the rebound!
How is holding up now. I am looking at this or Monstaliner. Monstaliner claims to be the only UV safe liner out on the market
It’s holding up great! Mine is out in the sun quite often and no issues so far.
This is the video I was looking for.
I have a 99 tj in about the same shape.
That looks like it would work well with the desert sand pearl paint job.
I’m very glad I did this. It’s been over a year since I installed it and it’s performing very well! Be sure to visit my blog post for this project as it has more detail. Blog post link is in the video description.
Nice job and thanks for the video. My son and I have been prepping his '97 TJ to do the exact same thing!
Thank you! It’s an awesome project and well worth it. It has performed very well in salt air near the beach - no issues... I have more tips on my blog as well..
So two bottles of raptor liner was plenty for the tub, sides, and tailgate? How's it holding up?
Good job dude!
Beautiful job! Thanks for taking the time to post. 97 TJ here
You are welcome! I have much more detail on my blog - link in description
Does it get "dirtier", i.e does the dirt/hair stick to it at all? I've got golden retrievers.. and the hair sticks to the carpet.. so hard to clean.
Wouldn't recommend mixing in your Jeep. If you make a mess or knock it over good luck with the finished product! Overall, decent video. Also, wire brush wheel for overall scuffing usually gives a better result.
Thank you! Currently working on my 91’ YJ
Well done! I am gonna do this to my 1963 Ford Econoline van interior, and if that works well I’ll do it on my 2016 Wrangler!
this is gonna be my summer project!
CrossFin aweome man, well worth it for sure.
Very very nice job, different from common black floor lining
Thanks man! It’s meant to look like sand. ;)
Does the smell ever go away I've had my jeep done for a couple months and it still has a strong smell to it if its been shut up for the night.
No wonder you beat your son, he played you left handed to give you an advantage. Oh nice job on the spray in bed liner.
I’m going to be doing this to my 73 Blazer soon.
It was the best improvement I’ve done to my Jeep so far. Very very worth it!
How did the liner hold up ? I have a 75 jeep cj5 that I just painted the inside tube with Por-15 and was concerned about Raptor sticking . Ill try your method of lightly sanding with 80 grit sand paper before I paint . Great video , thank you .
You did a great job with the liner.
Thanks so much, Jason. It was surprisingly easy. The Hardest part was removing all the rusted bolts. I have more detail on my blog.
Awesome video that was very well done. Going through the same thing on my 94 land cruiser right now
Thank you! It is holding up very well.
Awesome color came out great !
love it! great job!! Planning on doing the same soon to one of my project cars. very encouraging.
Looks good- much better than black. Is it hot and noisy now though?
I am from Venezuela and I would like you could tell me where I can buy the painting but in beige. if you recommend a link. since I only see pure black color
What kind of Chemical did you use to clean the gun between coats?
Acetone
What were you using to clean it off? Paint thinner? Acetone ?
does raptor liner work on fiberglass?
Yes, it should work fine on fiberglass.
Good vid, same product and application I'm planning. Thank you
Thanks man, good luck!
Very well done I'm very impressed very nice jeep man 👌
Thank you!!!
Have you noticed any reduction in road noise, with the top on?
Yes, a small amount. However, I rarely put the top on. I mostly ride with the Bimini top only.
@@PahjoDesigns Thank you, I'm thinking I'll spay mine, but with the sound deadener
How is the liner holding up?
Really nice job and great video
What were you using to clean the equipment with in the end?
Acetone or mineral spirits.
@@PahjoDesigns Food for thought. Next time try not using the sink to clean your materials. That stuff goes back to our drinking water. It needs to be poured into a metal container and desposed of properly.
@@stevenharms338 All waste water goes through a dramatic cleaning process , If you have a floor drain in your garage it ties into the sanitary drain system , which is treat and released . I wouldnt be to concerned about small amount of chemicals you poured into the drain . Stevie boy just wants to bitch !
Can you paint over this stuff once you place it down? I will wanna paint it back to my original color (rescue green)
Bonavita raptor liner comes in black but you can buy a tintable version to paint it any color you want. I literally just finished my 95 YJ in white
Did you really spray this with a 6 gallon air compressor?
Yes. I was worried about this as well so I called U-POL and asked them if this would be ok. They said folks did it with a 10 gallon without issue. I rolled the dice and had no issues whatsoever.
With the top on does it echo a lot?
I drive with a bimini 99% of the time. I haven’t noticed any difference in sound when I do have my winter soft top, but I don’t think I drive it enough with that top to notice.
do you think it would look okay to do a black jeep with the tan liner, i think it would make dust and sand less noticable than my black interior does now
Yep, I live 3 blocks from the beach and that is part of the reason why I used this color. :)
Great job and thanks for tips !!!
What air compressor did you use?
I used this one. amzn.to/2pLFXZz
Dads got a stroke! *Buckets*
Popping trips these youngens. 😀. Thx for watching!
How is it holding after 3 year?
Holding up very well. I live 3 blocks away from the ocean in very salty air and it’s held up great.
How many of those bottles you ended up using? I am trying to do the same to my jeep.
All info is on my blog - I cant remember off hand. pahjodesigns.com/how-to-spray-bed-liner-for-jeep-wrangler-interior-tub/
Pahjo Designs apparently two bottles, thank for all the info on your blog 😄🤙.
Yep, that was it. The interior tub doesn’t take nearly as much as the exterior. It was very easy to apply and it holds up well. The hardest part was removing all the old rusted bolts and preparing the floor for the spray. I highly recommend POR15 to reinforce the drivers side floor as well.
Nice job👍👍🇦🇺🇦🇺
You covered rust with bedliner. Goodbye floor boards.
Ballers 🏀
🙏👍
your son has a akward shot but lefty can shoot a little lol
ubecool454 - lol, he shots from the hip. He only plays basketball in the driveway at home. He is a tall lefty baseball dude.
Your def a ball player huh????
Nice observation. D1 athlete a long time ago. :)
@@PahjoDesigns still got them skills 👍👍👍👍👍👍