How To Pass An Electrical Home Inspection!! -(Open Splice Box)

Get the Open Splice Junction Box HERE: bit.ly/3QQdak1
Open Splice Junction Box is a one-piece electrical junction box that helps you encase open splices in minutes. Open splices are a common, but dangerous, electrical wiring issue. They need to be repaired right away but with traditional junction boxes you can easily find yourself wasting time and money rewiring and remaking open splices. Wire splices left open need a wire cover, and none are as easy-to-use as this.
Cut how much time you spend in damp crawl spaces and hot, dark attics trying to work in poorly designed standard junction boxes. Go from dangerous, illegal open splices done by amateur handymen to a fully installed and safe box with just 4 screws and a few minutes of your time.
This ingenious electrical wire cover makes the routine job of repairing open wire splices less tedious. If the connectors are tight and undamaged, you can bring electrical work up to code without splicing wires from scratch with the Open Splice Junction Box.
Mfg. Note: Always inspect the wires to make sure the connectors are in good shape before enclosing the splice.
Here’s how easy it is to use the Open Splice Junction Box for repairing open wire splices:
1.Turn off electricity to safely handle the wires.
2. Before you begin installation, make sure all your wiring and
connections are correct and tight.
3. Bend the doors on the side of the plastic box inward to make room for the wires.
4. Attach the box to the structure.
5. Position the wire splice in the box.
6. Close the lid using the two provided screws to safely enclose the wire splice.
With almost no effort at all, you can complete your junction box installation and meet electrical code. The Open Splice turns junction box wiring into a quick fix, rather than a difficult annoyance. Electric wire splices that are exposed to the elements can become loose over time, causing dangerous sparks and heat. Using a junction box keeps wires encased and away from flammable materials.
U.L. Listed in the U.S. and Canada
25.8 Cubic inches of volume.
No need to disconnect the wiring.
Slots for wiring on four sides of the junction box.
Made in the USA.
SAFE - Developed through rigorous laboratory testing, this j-box (junction box) is built with fire-resistant polymer designed to meet U.S. (U.L. 514C)
𝙁𝙤𝙡𝙡𝙤𝙬 𝙍𝙖𝙘𝙠-𝘼-𝙏𝙞𝙚𝙧𝙨 𝙤𝙣:
𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙞𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢.𝙘𝙤𝙢/𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨/
𝙏𝙞𝙠𝙩𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙩𝙞𝙠𝙩𝙤𝙠.𝙘𝙤𝙢/@𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨
𝙁𝙖𝙘𝙚𝙗𝙤𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙛𝙖𝙘𝙚𝙗𝙤𝙤𝙠.𝙘𝙤𝙢/𝙍𝙖𝙘𝙠𝘼𝙏𝙞𝙚𝙧𝙨
𝙐𝙎 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙤𝙢/
𝘾𝘼𝙉𝘼𝘿𝘼 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙖/
Credits:
@HowToHome DIY
Dewayne Black- Open Splice Junction Box
HubCity Electricians
@builtwithtools
Voice Over: Brandon Reed @PoolVolution

[@TheNextStepAgency]

Key point for this is the time savings. If you had the remake the open splice you'd have to FIND THE BREAKER to take it apart and redo it.
You're up in an attic, the open splice likely wasn't even what you went up there to deal with, you don't know where it's connected to, you don't have an outlet to plug a circuit chaser in, the panel's on another floor.
Skip all that. That's the time saver.

[@trepidmetor513]

Just pop it and trip the breaker....