5 MAJOR Violations DIYers Are Making When Installing Metal Electrical Boxes! MOST Are Guilty Of #3!
HTML-код
- Опубликовано: 4 апр 2023
- ITEMS I USED ON THIS VIDEO:
- Metal 3/8” NM Cable Clamp Connectors - amzn.to/3ZLAsZs
- metal 3/8 NM SNAP LOCK Clamp Connectors - amzn.to/3nPuqK3
- Plastic 3/8” NM Cable Clamp Connectors - amzn.to/3zwD5Ui
- Green Ground Screws - amzn.to/3GiYvIa
- WAGO Wire Connector Set Kit - amzn.to/418lFJr
- VOLTCLAW Multi-Tool - amzn.to/40HBfvv
SHOP MY OFFICIAL FIX THIS HOUSE WEBSITE! : www.fixthishouse.net
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
☕️ Buy me a coffee 🙏🏽! This will greatly help support this channel and will allow me to help more People by creating more helpful and useful How To, DIY & Product Review videos! :
www.buymeacoffee.com/fixthish...
On today’s episode I will be showing you 5 MAJOR Violations DIYers Are Making When Installing Metal Electrical Boxes! MOST Are Guilty Of #3!
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
DISCLAIMER:
This video is meant for informational, educational, and entertainment purposes only! To better your knowledge on the concepts of electricity, electrical circuitry, entertainment component circuitry and all other wiring methods. Electrical codes in my area may be different from yours so always make sure you follow and stay current with your local code. With different codes around the world constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Fix This House cannot claim liability with all applicable laws, rules, codes and regulation for a project. DO NOT ATTEMPT ANY WIRING OF ANY KIND if you lack the knowledge and understanding required. Otherwise, personal injury and/or death as well as property damage or loss could occur. Your safety is your own responsibility, including proper use of equipment and safety gear, and determining whether you have adequate skill and experience. If you are a younger person or are inexperienced with electrical devices, ask for help from a parent, teacher or a licensed professional.
WARNING- Electricity is dangerous and can cause personal injury or DEATH as well as other property loss or damage if not used or constructed properly. If you have any doubts whatsoever about performing do-it-yourself electrical work, PLEASE do the smart thing and hire a qualified and licensed electrician to perform the work for you.NEVER WORK WITH LIVE VOLTAGE. Always disconnect the power source before working with electrical circuits.When performing electrical work, ALWAYS READ AND FOLLOW THE MANUFACTURERS INSTRUCTIONS AND SAFETY GUIDELINES. Always follow your local electrical code and requirements which are specific to local areas.By utilizing this video and the information given, YOU are expressly holding "FIX THIS HOUSE" HARMLESS FOR ANY PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH, OR ANY OTHER LOSS OR DAMAGE THAT MAY RESULT FROM YOUR ACTIONS. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Fix This House cannot be held liable if they cause any damage to their homes. Fix This House and all parties associated with it ARE NOT responsible for the use and results of this information by any party, especially those lacking sufficient skill or knowledge to perform these steps safely and ANY HAZARD CREATED IS THE SOLE RESPONSIBILITY OF THE USER.
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#electrical #outlet #diy 
Хобби
Really appreciate your videos. I know they are a lot of work to make. You really helped me with my remodel of my apartment. Completely redid all of the electrical using nothing but metal.
I’m learning something new each time you post. Look forward to it. I’m glad you show the how of the small things. I honestly didn’t know about the “plugs”or how they attach. Simple I know but if you don’t know you don’t know. There’s so much to do in this 121 year old house. I’ve already bought two carpenters new trucks and put there kids through college!
Helpful !
The 1/4 inch sheathing is a minimum. It is not "out of code" to have extra sheathing in the box. (although it looks amateurish to leave more than necessary)
Thank you !
It also fills up the box and is hard to bend if you leave more than a couple inches.
I subscribed to your channel a couple weeks ago for my diy project and my mom mentioned she needed something you have a video for too 😊 I really like how you walk us through with great layman term and explanations. You are helping me save money and my 80 year old mom too! Thanks for your videos!
Thank you so much for the meaningful comment! 🙏🏽If you have the chance please send me an email! - fixthishouse1@yahoo.com
I swear, Jay knows everything!!
Very informative. Thk you
Really enjoy your videos. I always learn something new.
There are wrenches for those screw-on star nuts. I have a couple. They're needed for things like adjusting motion sensitive lights and such.
Good to know about needing minimum 6" of wire. Seen some existing boxes have previously been worked on & have less than 6" left🤦
GREAT video for me to watch before I did my diy
Thanks for all your nolage
Why is it bad for leaving shielding inside the box? 🤔
Thank you.
When I've done Romex into metal, I use the old screw on type mostly becuase the metal snap-ons were not availabe and/or hard to find.
The plastic ones are too wonky. The metal screw-ons really need to be tighed down witch is a PITA without a pair of pliers or a tool made for that purpose. And, yes, people will use a screw driver to bang those nuts in, which is sub-optimal for many reasons. For DIY, the snap-in metal ones are your best option.
On a metal box, it's better to leave enough of the feed ground wire to go around the box ground screw and then go to everything else. Going to a push in or screw on nut can potentially come off and be again a hazard.
Thank you for the tip! 🙏🏽😊
Thanks for the money saving tips...
Thank you! 🙏🏽😊
Regarding grounding the ungrounded outlet to the metal box. What if your house was built in the 1950s and there is no copper ground wire, like in your video???
Great job
Just a point, even if you touch a hot box, unless your other hand is touching a
grounded object or you are standing in a wet area you wont get a shock necessarily. But a good idea when working with high voltages is to keep one hand behind ur back.
As much as people tell me that electrical is easy to do, I still am uneasy when attempting any repairs. Maybe one day it will click with me and I will be confident when I am doing repairs.
That in quite common when it comes to electrical work. Good on you for acknowledging your comfort level. Hope you overcome this fear.
I am not an electrician but I know that cable clamps are required. How can you forget that?
Yah but the problems with the screws is that students tend to over tighten the 2 outer screws and then it puncture through the insulation and then it creates a short circuit. I tutor electrical wiring with my teacher and we've seen so many students blow the fuse because they over tighten the 2 screws. In the past, he had to call security to turn on the circuit breaker again if it flips, and at one point the security guy wasn't happy and complained to the school. The school almost shuts down the class for good. Now my teacher uses 3 safety devices so that it wouldn't tricker/shuts off the breaker. He uses an isolation transformer, a quick blow fuse, and a GFCI.
One semester, I saw a Mexican guy puts the hot wire on the metal box. I told him "NO, DON'T DO THAT". He keeps arguing with me, and in the end, he even said "this is how we wire in Mexico".
I asked people where they learned electrical wiring and they say "RUclips". I tell them to take a class at Santa Ana College in California. There's the basic and advance class. My neighbor and I teach people the correct way to wire, not RUclips way. We go over a lot of theory, which some youtuber don't teach you. My cousin learned from youtube and he wires for the temples. I've seen dangerous wiring or ways that would violate the codes or inspector would not like it.
Why does metal conduit feel hot on a electrical circuit
This makes a lot of sence but what I have seen here is that u should run to a connector then pigtail back to the screw, does'nt make sence.
Why bother? Just use a plastic junction box.