How to Replace Rear Brake Calipers 2008-2010 Ford F-450

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABC...
This video shows you how to install new rear brake calipers from TRQ on your 2008-2010 Ford F-450. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2008 Ford F-450 Super Duty
2009 Ford F-450 Super Duty
2010 Ford F-450 Super Duty
Tools you will need:
• Pry Bar 1aau.to/oWU/1AX...
• 10mm Wrench 1aau.to/oYY/1AX...
• 24mm Wrench
• 14mm Socket 1aau.to/obCH/1A...
• 16mm Socket 1aau.to/obCH/1A...
• 21mm Deep Socket 1aau.to/oamv/1A...
• 24mm Socket
• 1/2 Inch Impact Gun 1aau.to/ouR/1AX...
• 1/2 Inch Breaker Bar 1aau.to/oqM/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/obCH/1A...
• Socket Extensions 1aau.to/obCH/1A...
• Torque Wrench 1aau.to/oaLa/1A...
• 3/8 Inch Wrench
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/oajz/1A...
• Rust Penetrant
• Safety Glasses 1aau.to/oacs/1A...
• Floor Jack 1aau.to/oaax/1A...
• Jack Stands 1aau.to/oXI/1AX...
• Rubber Mallet 1aau.to/ohm/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money