Definitely would like to see one for the newer ford fusion. I want a slight stance and chrome wheels but don’t have a clue how to go about it. Still new to this.
please, please, please do the e92 BMW series. I've been checking your gallery for 335 setups and its such a hard car to find wheels with close to 0 ETS to get deep dish unless you go m3 and I prefer the 335 stock body.
Or you can do like I did w/my 2017 Sport: powder coat the stock rims! I had my rims powder coated black for just over 1/2 the price of new rims. Ordered black lug nuts & spray painted the Honda emblem black. Not only do they look AWESOME, but I know I still have all the stock rim specs in place, meaning more peace of mind for the old guy that I am.
Love the video, question for you. I have a 06 TL on tein suspension and I'm looking for a flush fitment using an 18 inch rims. What offset do you recommend? Help!!
What if you don't want to lower your car. You just want a stock setup that's sporty and clean. I love the Niche Targas; I have 2015 Honda Accord Ex-l. I would like to run stock 17s'
I'm trying to figure out what wheels to put on my 15 EXL Coupe as well... Like you I plan on keeping my suspension stock because I think it looks amazing the way it sets.. I am going up in tire size though to a 18×8.5 +35-40 offset depending on the wheel style... I saw the M131 Targas in a 17×8 +40 on MAPerformance for $204.. Awesome looking wheel especially for the quality & $.. What other wheels have you been looking at ✌️
I'm in a 2013 Accord sedan on 215/55/17 with pilot sport all season 4. I'm looking to go to a 235 with 18s. Daily driver, no stretch. I like my pilot sports. What tire and wheel do you recommend?
2016 Honda Accord Sport Help! There’s no straight forward answer, I’m planning on running DS05 19x9.95 +22 offset. I will be adding eibach pro kit springs. Will I have to roll the fenders or adjust camber?They’re seriously the only wheels I like. Also any recommendations for tire size?
I found that 19x9.5 +22 offsets pokes quite a bit on my 2017 coupe. I'll definitely have to roll and pull the fenders. Did you go with this size? How is the fitment?
Advan does a lot of rim sizes. I was able to fit 19x9.0 et35 front (on 245/40/19 and 255/35/19) and 19x10.0 et 35 (275/35/19) without any rubbing issues and I'm dropped on Tein Colivers around 2.0 inches. I do have a 3-piece camber kit, in the rear, with the camber and caster dialed in. Most importantly, I'm within alignment specs with no rubbing. Car looks mean as hell with the wide set-up. I can't stress that caster plays a big role in the rear with wide tires.
You aren’t wide until you’re running 20x9.5 up front (245/30/20) and 20x11.5 in the rear (275/35/20) with a +42 offset and -5 degrees of camber in the rear with -3.5 degrees of camber up front
@@johnacevedo3028 but the tire sizes I mentioned are still wider. I can respect the size. There is no doubt that It does look good. However, with those aspect ratios, on the tires, curb rash is just a matter of time. In addition, if the rims are not forged, you're now hampering performance. In addition, Advan doesn't make those specific rim sizes for the RZII's. Lastly, the degree of camber will hamper performance. For me, it's all about balance. Respect the size, but it's too costly to maintain especially with that degree of camber. Slightly, over flushed is as far as I can take it while still keeping it performance oriented.
@@johnacevedo3028 I'm aware that toe is the primary driver of tire wear. I was running negative -4 degrees of camber with zero toe. The inner side of tires still were still degraded prematurely on my personal set-up. Again, I like the look you mentioned and i agree it looks A LOT better than my set-up but unfortunately, for me, it's too costly.
Can you please do 04-08 TSX? I have been looking for wheels for 8 months now. It’s a big investment for others and me, if you can please do! I have the perfect design from you guys websites but im afraid of ordering them and not having it fit correctly. I can buy camber arms no problems but I don’t wanna raise my car, I’m already running in the fron and back has 1” to go still but I have to mess with the preload to lower it. Please and thank you!!
@@FitmentIndustries thank you! I already sent a email yesterday to you guys. My wording my have been bad for explaining but I included my information in case you guys need more in-depth. Thank you so much!
Definitely would like to see one for the newer ford fusion. I want a slight stance and chrome wheels but don’t have a clue how to go about it. Still new to this.
You should do Top 10 Wheels for 2023!! Would love to see what you guys think
Imma need that 10th gen vid!!!!!
please, please, please do the e92 BMW series. I've been checking your gallery for 335 setups and its such a hard car to find wheels with close to 0 ETS to get deep dish unless you go m3 and I prefer the 335 stock body.
Nice video but this should have been out! I already know what fits my car. I needed this in 2020.
Square front wheels from the 370Z Ray's Racing wheels are the best looking!
Can't wait for the 23 Camry episode, I'm to basic to come up with my own setup. 🤣🤣
We can see what we can do 🤘
U guys should do 8th gen si coupe video again....
Can y’all please talk about the Infiniti Q50. Mods, setup, diff between 3.7 vs 3.0t. Thanks
Can’t wait for the vid on the 10th gen 🫡
Do 10 th gen accord plz!! 🙏
Can yall do acura tsx as well from 04 to 08 ?
DIDNT THINK SOMEONE ELSE HAD ONE HERE! YES PLEASE!!
Can you guys do a "what fits, Volvo 240"?
✨8th gen with staggered 19” perf fit✨
Any specialized gauge clusters for honda accord sports? digital preferably.
Do a video on the 8th gen accord because I can't decide what wheels to put maybe Advan GT wheels
Have you checked out the 8th gen in our gallery yet?!
@@FitmentIndustries I have but I still can't decide what to put on as a daily driver setup
After the last Accord vid and it helping me get my setup together, I was REALLY hoping my Build would make this one 😅
Maybe next time! 🙏
Do a video on 9th gen civic si (2012-2015)
Day 344 of asking for a "So you want a nissan juke"
You should do a 1996 Nissan Altima i what to do wheels and tires and lowered it
Static 9th gen here, just ordered my Atrisa Titans from FI…oh lawd this is about to be spicy 🌶️!!!
Make sure you tag us in some photos on IG! 🤘
Or you can do like I did w/my 2017 Sport: powder coat the stock rims! I had my rims powder coated black for just over 1/2 the price of new rims. Ordered black lug nuts & spray painted the Honda emblem black. Not only do they look AWESOME, but I know I still have all the stock rim specs in place, meaning more peace of mind for the old guy that I am.
Love the video, question for you. I have a 06 TL on tein suspension and I'm looking for a flush fitment using an 18 inch rims. What offset do you recommend? Help!!
What width are you running?
@@FitmentIndustries I was thinking 235 45 18
Is possible to put some TE37SL on a Honda accord????????????
Yes
What fits the new sedan rollas 👀
What if you don't want to lower your car. You just want a stock setup that's sporty and clean. I love the Niche Targas; I have 2015 Honda Accord Ex-l. I would like to run stock 17s'
I'm trying to figure out what wheels to put on my 15 EXL Coupe as well... Like you I plan on keeping my suspension stock because I think it looks amazing the way it sets.. I am going up in tire size though to a 18×8.5 +35-40 offset depending on the wheel style... I saw the M131 Targas in a 17×8 +40 on MAPerformance for $204.. Awesome looking wheel especially for the quality & $.. What other wheels have you been looking at ✌️
I'm in a 2013 Accord sedan on 215/55/17 with pilot sport all season 4.
I'm looking to go to a 235 with 18s. Daily driver, no stretch. I like my pilot sports. What tire and wheel do you recommend?
Have you checked out our gallery yet for some ideas?! 👀
@@FitmentIndustriesyes
Do 6th gen accord please
2016 Honda Accord Sport
Help! There’s no straight forward answer, I’m planning on running DS05 19x9.95 +22 offset. I will be adding eibach pro kit springs. Will I have to roll the fenders or adjust camber?They’re seriously the only wheels I like. Also any recommendations for tire size?
Have you checked to see if anyone else is running those specs in the gallery?
@@FitmentIndustries only one I found had stock suspension.
I found that 19x9.5 +22 offsets pokes quite a bit on my 2017 coupe. I'll definitely have to roll and pull the fenders. Did you go with this size? How is the fitment?
Advan does a lot of rim sizes. I was able to fit 19x9.0 et35 front (on 245/40/19 and 255/35/19) and 19x10.0 et 35 (275/35/19) without any rubbing issues and I'm dropped on Tein Colivers around 2.0 inches. I do have a 3-piece camber kit, in the rear, with the camber and caster dialed in. Most importantly, I'm within alignment specs with no rubbing. Car looks mean as hell with the wide set-up. I can't stress that caster plays a big role in the rear with wide tires.
You aren’t wide until you’re running 20x9.5 up front (245/30/20) and 20x11.5 in the rear (275/35/20) with a +42 offset and -5 degrees of camber in the rear with -3.5 degrees of camber up front
@@johnacevedo3028 but the tire sizes I mentioned are still wider. I can respect the size. There is no doubt that It does look good. However, with those aspect ratios, on the tires, curb rash is just a matter of time. In addition, if the rims are not forged, you're now hampering performance. In addition, Advan doesn't make those specific rim sizes for the RZII's. Lastly, the degree of camber will hamper performance. For me, it's all about balance. Respect the size, but it's too costly to maintain especially with that degree of camber. Slightly, over flushed is as far as I can take it while still keeping it performance oriented.
@@ErwinSchrodinger64 actually… for your knowledge, -5 degrees of camber isn’t really excessive nor does it cause excessive tire usage.
@@johnacevedo3028 I'm aware that toe is the primary driver of tire wear. I was running negative -4 degrees of camber with zero toe. The inner side of tires still were still degraded prematurely on my personal set-up. Again, I like the look you mentioned and i agree it looks A LOT better than my set-up but unfortunately, for me, it's too costly.
Even on Saturday morning.
I'm kinda upset my 9th Gen wasn't featured in this video
🥺
What about a 2010 sentra
Can you please do 04-08 TSX? I have been looking for wheels for 8 months now. It’s a big investment for others and me, if you can please do! I have the perfect design from you guys websites but im afraid of ordering them and not having it fit correctly. I can buy camber arms no problems but I don’t wanna raise my car, I’m already running in the fron and back has 1” to go still but I have to mess with the preload to lower it. Please and thank you!!
You can message us on IG or FB and we can help out as well!
@@FitmentIndustries thank you! I already sent a email yesterday to you guys. My wording my have been bad for explaining but I included my information in case you guys need more in-depth. Thank you so much!
what wheels fit a bmw e82 e88
I'm going 26" on my CRV. 😮
Hey, can someone plz help me I’m looking for wheels for my my 2006 fiesta I want some wheels that won’t stick out and have any offset
DM us on either IG or FB!
@@FitmentIndustries okay I only have insta, so I left you message on there, thanks so much
10th Gen superiority
Pretty sure I tuned the car in the thumbnail lol
TSX TSX TSX!
🔥
I should’ve come this video :(
😎
@_CameFromDetroit.. 2013 Accord V6 sedan bagged on airlift 3P.. Weds Kranze Bazreias 19x10/11 +15/+20 235/35 and 245/35
@bagd_cr2 best accord 😵💫