Superrrrrrrrrrrrrr Mein Auto 4 Monate beim Michaniker hat das probleml nicht gefunden Nur durch dein Video habe ich selbst das Auto repariert Herzlichen Dank ❤❤❤
Hi I have a 2013 Peugeot boxer van and I have tried three OBD readers none of which were linked I have power on pin 16 fuse in fuse box is ok is there any other fuses any help would be appreciated 👍 excellent videos by the way
Sorry for the late reply daniel, I use the phoenix plus model which allows you to use it as a normal tablet for google etc, The quick save function is what saves the reference waveforms for the micsig although i find it to be limited compared to the pico with the captures etc !
Hello friend. The car arrived today in working order. Car won't start after installing new software. There is no problem with the battery and fuses. I would be grateful if you could help.
Bonjour j'ai un boxer de 2007 3 litres HDi 157 j'ai mon BSM qui a cramé suite à l'eau qui a coulé dessus j'ai remplacé celui-ci mais le problème n'est pas encore résolu quand je roulais j'ai perdu la DA et le camion n'a plus jamais voulu démarrer j'ai le fameux logo voiture avec cadenas je voulais savoir si le schéma du BSM était comme le vôtre car nous n'avons pas la même motorisation
Hello mate. I have a Peugeot Boxer3 2.2 with 140 hp from 2020 with 110,000 km and when I passed the second MOT, last Thursday it came back UNFAVORABLE. The defect is SERIOUS: “5.3.6 VEHICLES WITH COMPRESSION IGNITION ENGINE: OBD reading. Distance or time since MIL activation is greater than 1h or 1km with OBD reading MIL OFF” The ITV doesn't give me any explanations, the operator told me to take it to the Workshop to see the problem. It should be said that there is NO warning light on in the car dashboard, I do remember the symbol coming on on several occasions. yellow for engine failure because according to the official company they had to do the maintenance (oil change) but that failure warning light when changing the oil disappeared so at the time of the inspection everything was OK. The problem I have is that I have not been able to drive with my work tool since last Thursday since I am a self-employed transporter, and to think that I have had an MOT issued without justification by the ITV makes my blood burn, you can't imagine how much. That same day I called several Peugeot dealerships and they did not give me an appointment until 15 days later. This is unacceptable for my job, so in desperation due to the situation, I decided to buy the lauch CRP 123E PLUS scanner on Amazon to clear up any doubts and see if it really there is some fault. Well, after carrying out the diagnosis with the scanner, the result is FAVORABLE, my van has no fault whatsoever. Could it be because the switchboard needs an update? In December of last year, Peugeot sent me a letter indicating that in order to prevent engine stall anomalies, the engine control calculator had to be updated, but since the vehicle never had any faults, I didn't take it home because every time it enters a workshop it comes out worse.
Hi. Is it possible you can please give some paid advices? I have the same issue on my 2013 Peugeot Boxer. But won’t find the wiring diagram nowhere. Best regards
Ecu on peugeot boxer 2007 says not matched. It was cloned by another person before me. So the ecu cost the customer £700 thereabouts. They sent it back and it was installed and yet van cranks but no start. Says cam crank not synchronised and ECU not matched. Any ideas how to match it
Mine has the same problem at the moment. The ECU is on the verge of being replaced but this has stopped me in my tracks. Being a complete novice with auto electrics, how do wires just break like that (in all honesty I couldn’t see the break in the clip!)?
Hi Sean is yours the same age as the one in the video? If you need any guidance or help be my guest and fire away. The corroded wire on this van was very fine and I know what to look out for just by experience :). They usually break due to poor quality copper/water ingress.
@@mrautoservices7354 thank you very much! Ours is a 2007 (57 plate) and has suffered water ingress that should now be cured. We have the exact same symptoms though; it turns over but doesn’t fire up. Engine management light doesn’t come on but the immobiliser light stays on. Diagnostic gives a ‘no ECU communication’ fault code
Hello friend. The car arrived today in working order. Car won't start after installing new software. There is no problem with the battery and fuses. I would be grateful if you could help.
Just taken inspiration from this video to find a wiring break in my 2007 ducato. Two hours to find, 2 minutes to fix-thanks
Superrrrrrrrrrrrrr
Mein Auto 4 Monate beim Michaniker hat das probleml nicht gefunden
Nur durch dein Video habe ich selbst das Auto repariert
Herzlichen Dank ❤❤❤
Hallo Can i please have those Circuit diagrams? I need to fix my Jumper
Fantastic job, well done. Shocking considering the age & mileage of the van.
I have exactly the same problem with a 2018 boxer. I'll be sure to check it out tomorrow. Can't wait. I love auto electrics!
Thanks!
Under 10.000 miles shocking. Very good diagnosis though 👍
What codes did u have on the scanner??
Could u please share...
Does that ecu have permanent live ?
Thanks
Clever guy, wish you was local to me, could do with your expertise
Hi I have a 2013 Peugeot boxer van and I have tried three OBD readers none of which were linked I have power on pin 16 fuse in fuse box is ok is there any other fuses any help would be appreciated 👍 excellent videos by the way
Two questions Ryan, which model topdon scan tool are you getting wiring diagram on and how do I save the capture on the micsig to analyze later on?
Sorry for the late reply daniel, I use the phoenix plus model which allows you to use it as a normal tablet for google etc, The quick save function is what saves the reference waveforms for the micsig although i find it to be limited compared to the pico with the captures etc !
Hello friend. The car arrived today in working order. Car won't start after installing new software. There is no problem with the battery and fuses. I would be grateful if you could help.
Having a lot of trouble with a 07 Relay. Injector driver internal fault. Van starts and runs ok until you try and rev it
Bonjour j'ai un boxer de 2007 3 litres HDi 157 j'ai mon BSM qui a cramé suite à l'eau qui a coulé dessus j'ai remplacé celui-ci mais le problème n'est pas encore résolu quand je roulais j'ai perdu la DA et le camion n'a plus jamais voulu démarrer j'ai le fameux logo voiture avec cadenas je voulais savoir si le schéma du BSM était comme le vôtre car nous n'avons pas la même motorisation
Hello mate.
I have a Peugeot Boxer3 2.2 with 140 hp from 2020 with 110,000 km and when I passed the second MOT, last Thursday it came back UNFAVORABLE.
The defect is SERIOUS: “5.3.6 VEHICLES WITH COMPRESSION IGNITION ENGINE: OBD reading. Distance or time since MIL activation is greater than 1h or 1km with OBD reading MIL OFF”
The ITV doesn't give me any explanations, the operator told me to take it to the Workshop to see the problem.
It should be said that there is NO warning light on in the car dashboard, I do remember the symbol coming on on several occasions.
yellow for engine failure because according to the official company they had to do the maintenance (oil change) but that failure warning light when changing the oil disappeared so at the time of the inspection everything was OK.
The problem I have is that I have not been able to drive with my work tool since last Thursday since I am a self-employed transporter, and to think that I have had an MOT issued without justification by the ITV makes my blood burn, you can't imagine how much.
That same day I called several Peugeot dealerships and they did not give me an appointment until 15 days later. This is unacceptable for my job, so in desperation due to the situation, I decided to buy the lauch CRP 123E PLUS scanner on Amazon to clear up any doubts and see if it really there is some fault.
Well, after carrying out the diagnosis with the scanner, the result is FAVORABLE, my van has no fault whatsoever.
Could it be because the switchboard needs an update? In December of last year, Peugeot sent me a letter indicating that in order to prevent engine stall anomalies, the engine control calculator had to be updated, but since the vehicle never had any faults, I didn't take it home because every time it enters a workshop it comes out worse.
Hi. Is it possible you can please give some paid advices? I have the same issue on my 2013 Peugeot Boxer. But won’t find the wiring diagram nowhere. Best regards
Ecu on peugeot boxer 2007 says not matched. It was cloned by another person before me. So the ecu cost the customer £700 thereabouts. They sent it back and it was installed and yet van cranks but no start. Says cam crank not synchronised and ECU not matched. Any ideas how to match it
Thank you sir for posting this useful video, however can I kindly ask you to upload English narration please. Thank you
What service do you use for your wiring diagrams?
Alldata?
Do you do Peterborough area ?
Sorry we only cover Scotland
Nice job.
Mine has the same problem at the moment. The ECU is on the verge of being replaced but this has stopped me in my tracks.
Being a complete novice with auto electrics, how do wires just break like that (in all honesty I couldn’t see the break in the clip!)?
Hi Sean is yours the same age as the one in the video? If you need any guidance or help be my guest and fire away. The corroded wire on this van was very fine and I know what to look out for just by experience :). They usually break due to poor quality copper/water ingress.
@@mrautoservices7354 thank you very much! Ours is a 2007 (57 plate) and has suffered water ingress that should now be cured. We have the exact same symptoms though; it turns over but doesn’t fire up. Engine management light doesn’t come on but the immobiliser light stays on. Diagnostic gives a ‘no ECU communication’ fault code
@@seanDB1989 First thing that i personally would check is powers and grounds, The most basic check that can be done with a multimeter
@@mrautoservices7354 sounds a good idea to me! Seems sensible to check those before replacing the whole ECU only to land back at square one!
@@seanDB1989 Definitely! Get back to me with your findings 👍
do You have wire diagram to JUMPER 2008 2.2 HDI?
THX
Paid for Diagnostics - No Joy
Paid for New Keys Pairing - No Joy
Now guy is saying no communication to ECU
Not sure what to do next
This sounds like we have done the work to your van lol but we haven’t just to make people aware 👍👍
For me it was the relay you have disconnected, sou try ať First this :)
I got this code while shutting down my engine during a scan. Beware, might not be so serious
Broken wire on an 18 plate !! 🤷🏽♂️
<
< *NOT, NOT, NOT ... Peuge-NOT.*
<
<
<
<
<
<
<
<
in ENGLISH please
Don’t watch.. Simple 🙂
These vans have the security system caljwd (ghost) if stolen very offective however very temprentle in starting
Hello friend. The car arrived today in working order. Car won't start after installing new software. There is no problem with the battery and fuses. I would be grateful if you could help.