www.paypal.me/rahfree PayPal link for entry, please be sure to include shirt size and mailing address for shirt! Good luck everyone! This is gonna be an awesome ride for whoever wins it!! #rahfree
It's a Kobalt compressor from Lowes, got it a few years ago, the sand blaster keeps it working hard but it doesn't require a 220 outlet and that's what sold me, it's very portable and works great in the storage unit.
Good Luck with your Project I just completed this swap and I love it. It was fairly simple. Rear Driver Coil will hit Brake booster. If you use Headers, you will get heat soak into the Starter, I'm still trying to fix that may get mini starter, I did do a starter wrap and its still happening.
Hey! Thanks for watching and sharing that helpful info. I was going to cover that in the next video lol. I think I was able to resolve my heat soak starter issues on a previous impala ls swap, the car sold shortly after experimenting but I belive everything worked out well. I had the headers ceramic coated and used a mini starter. I wasn't driving it hard but cruising around, traffic, or any other situation where heat wasn't able to get pulled away from it like during highway speeds seemed to be fine. Every since then I do ceramic coated on all of my headers to help with that. Haven't had any issues since under normal driving conditions. Do you have anyone local to you who does jet hot coating or ceramic coating?
@@RahFree - I ceramic wrap then and did a wrap on starter and still getting heat. Next im going to try mini starter do you have mini starter part number you used? Thanks
@@smithmj2010 oh wow! I'm surprised your still getting that kind of heat with that combination. Out of curiosity, what mounts are you using? I'll have to check and see what starter I used previously, it was either a Powermaster or Sikky, I wanna say it was a Sikky starter. I'll see if I can find some pictures or receipts on it. I'm curious if you try different mounts to get the header away from the Starter if that would help.
@@RahFree i used original mounts and raised them 3/4 in and ls plate. The headers connect right next to starter and i had the gasket blow and burned the trans wires. Guy that helped with putting trans end did not put the complete gasket back. I see you are not to far from Chicago and in low rider seen. I built mind more like restro mod.
I sent payment for ticket back on September 22nd but still haven't received my numbers. Will you enter everyone's. name and numbers in future video? And when is actual drawing date?
Hey Douglas, I haven't processed last week's entries yet. I will be working on it tonight and will get it over to you this evening. I haven't put anyone's names in these Rah-ffles yet but I can definitely post yours if you'd like, just let me know. Some people don't want their names posted just in case they don't win. The previous Rah-ffle there was someone who had over 20 entries and didn't win, but he did get $1000 from the runner up winnings. Im hoping to have the drawing for this before Thanksgiving. I keep finding extra stuff to throw in with the car but it's coming along pretty well now. Just needs wheels installed and some odds and ends and it'll be ready for the winner to finish to their liking. This process takes a little longer get than expected doing it by myself and juggling family and work. It's coming along nicely though!
@@RahFree any vibration while driving? I've seen a lot of people say you need to cut the frame to lower the engine or drive line angles will be off and cause vibration, I really don't wanna cut my frame but I'm dropping a twin turbo LS into my 63 and I don't want vibration issues w the kind of hp I'm making
@@louisward3654 their website will have you verify the trans style also, they do trans mounts too, along with fuel tank, pumps, etc. Quite a few solutions available from them. You will need to relocate the coils though, they won't clear the driverside brake booster. It's not a difficult process.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
www.paypal.me/rahfree PayPal link for entry, please be sure to include shirt size and mailing address for shirt! Good luck everyone! This is gonna be an awesome ride for whoever wins it!! #rahfree
Got my tickets this time want me this round it maybe just my luck and I win thanks brother 🙏
🔥🔥🔥🔥
That’s crazy
🙋🏾♂️what's up man?!?!?
love the ending "Only fans" lmaooooo
😂🤣😂
💯💯✊🏽✊🏽 got a spot waiting 😂🤣
Good luck!
What air compressor did you use to blast the frame that was strong enough. I need to get the same one
It's a Kobalt compressor from Lowes, got it a few years ago, the sand blaster keeps it working hard but it doesn't require a 220 outlet and that's what sold me, it's very portable and works great in the storage unit.
That's what I need thanks
@@markwatts6683 no problem 💪🏿
First of all.... I don't watch long videos, BUT this was awesome! I have a ticket, gonna get two more on pay day! I wanna see this thing in my garage!
🤣🤣🤣🤣 Thank you! This one was fun and exhausting at the same time!! I just hope it goes to a good home!
Good build on the captain 👏💪🏽👍🏼
Hey! Thanks man!
Nice bro.. can't wait to see it in my driveway 🙏🙏🙏
Just takes one ticket to win!
We going big this time bro I dont even like bubble gum hahaha
🤣😂🤣😂🤣 You're a machine man!!
That frame looks pretty good man. Idk what the heck my mechanic is doing but your making it look pretty easy.
Thanks man!! It's been pretty fun so far doing this, just time consuming!
How much for shirt (to enter the raffle)? -joe from WYOMING
Hey Joe! Shirt is $100 free shipping for vehicle to the winner also.
@@RahFree if it doesnt go up yet i 'll get at you on the 1st of the month, thx.
@@joefromWY ok sounds good. Got a 63 two door up next
Good Luck with your Project I just completed this swap and I love it. It was fairly simple. Rear Driver Coil will hit Brake booster. If you use Headers, you will get heat soak into the Starter, I'm still trying to fix that may get mini starter, I did do a starter wrap and its still happening.
Hey! Thanks for watching and sharing that helpful info. I was going to cover that in the next video lol. I think I was able to resolve my heat soak starter issues on a previous impala ls swap, the car sold shortly after experimenting but I belive everything worked out well. I had the headers ceramic coated and used a mini starter. I wasn't driving it hard but cruising around, traffic, or any other situation where heat wasn't able to get pulled away from it like during highway speeds seemed to be fine. Every since then I do ceramic coated on all of my headers to help with that. Haven't had any issues since under normal driving conditions. Do you have anyone local to you who does jet hot coating or ceramic coating?
@@RahFree - I ceramic wrap then and did a wrap on starter and still getting heat. Next im going to try mini starter do you have mini starter part number you used? Thanks
@@smithmj2010 oh wow! I'm surprised your still getting that kind of heat with that combination. Out of curiosity, what mounts are you using? I'll have to check and see what starter I used previously, it was either a Powermaster or Sikky, I wanna say it was a Sikky starter. I'll see if I can find some pictures or receipts on it. I'm curious if you try different mounts to get the header away from the Starter if that would help.
@@RahFree i used original mounts and raised them 3/4 in and ls plate. The headers connect right next to starter and i had the gasket blow and burned the trans wires. Guy that helped with putting trans end did not put the complete gasket back. I see you are not to far from Chicago and in low rider seen. I built mind more like restro mod.
Yo yo . I'm in Columbus I'd like to come get hands on and learn What I can. And definitely need a ticket
I sent payment for ticket back on September 22nd but still haven't received my numbers. Will you enter everyone's. name and numbers in future video? And when is actual drawing date?
Hey Douglas, I haven't processed last week's entries yet. I will be working on it tonight and will get it over to you this evening. I haven't put anyone's names in these Rah-ffles yet but I can definitely post yours if you'd like, just let me know. Some people don't want their names posted just in case they don't win. The previous Rah-ffle there was someone who had over 20 entries and didn't win, but he did get $1000 from the runner up winnings. Im hoping to have the drawing for this before Thanksgiving. I keep finding extra stuff to throw in with the car but it's coming along pretty well now. Just needs wheels installed and some odds and ends and it'll be ready for the winner to finish to their liking. This process takes a little longer get than expected doing it by myself and juggling family and work. It's coming along nicely though!
Did you have to cut the front crossmember for the oil pan to clear?
No cutting required. F BODY LS1 oil pan and good mounts are very helpful for a good fit though.
@@RahFree any vibration while driving? I've seen a lot of people say you need to cut the frame to lower the engine or drive line angles will be off and cause vibration, I really don't wanna cut my frame but I'm dropping a twin turbo LS into my 63 and I don't want vibration issues w the kind of hp I'm making
@@louisward3654 I'm not sure what mounts those people used but the F body LS oil pan and the mounts I used have never caused that problem for me.
@@RahFree thank you, I'm ordering the brp mounts
@@louisward3654 their website will have you verify the trans style also, they do trans mounts too, along with fuel tank, pumps, etc. Quite a few solutions available from them. You will need to relocate the coils though, they won't clear the driverside brake booster. It's not a difficult process.
What up bro I still need to hook up with you to get my tickets and t shirt
Hey Mark!!! Are you available this weekend? I can come meet you somewhere.
Hey what did you get those frame mounts for the swap?
I'm not sure what you mean, are you asking where I got them from?
Can you help me out with parts info
Sure, are you on Instagram or Facebook? Message me on there and I can help you.
How are you brother..