My feet size is 41 (EU) tried 40. Hesitating but in the end I choose to downside to 40, which was a very good decision. I feel so great in them when the Intuition liner adapted to my feet. 2:11 also the buckle is not plastic but metal, i already scratch it and it is silver below :)
How would you compare the Neo 1 Intuition with the FR1 Intuition in terms of responsiveness, lets say for slalom skating? You already showed us the Neo shell is wider then the FR1 shell, does this mean the Neo is more focused on comfort and less on responsiveness? As a slalom skater I'm very interested in this.
Great video. I bought all my skates from Loco, except a second hand pair of linerless Seba High that I put Intuitions in (Intuitions bought from Loco 😁) and a Wizard setup I bought years ago from Shoptask. I have several pairs of Seba FR1's with different frame setups, and a "deluxe Intuition" FR1. I do feel I prefer the older Seba FR1 boots to the FR ? But I can't put my finger on why. They feel more substantial somehow, more solid, different plastics used? Idk. Anyway, I like the matte look of this Neo One, the dual density, especially in the top of the cuff, and the low ride height, but I'm not sure that's enough to warrant yet another pair of new skates 😁 Great review tho, covers everything well. Love you guys.
I'm curious how long the softer parts of the boot will last. After many sweaty skates, I'd just hope it doesn't start to degrade and fall apart. Compared to the full hard shell that is still great for me after 2 years with a LOT of skating.
Love the format of the vid as I wait in agony for these to release in US. The size chart displayed shows neo2 and think the neo1 has a slightly different chart and shell sizing. It has been tough to get the actual official neo 1 size chart but it does exist. FR was kind enough to send when I asked.
Looks like they adjusted the mondo sizes to be a bit different on the Neo 1 chart. Makes sense, I suppose the Intuition liner would give you slightly more room in it's respective shell size because it's lower volume. Shell sizes are the same on both though obvs.
The ride height difference doesn't look as large at the heel... Can you measure that too? If true then theyve actually changed the stance you adopt, almost as you would in a hi-lo / hockey setup. Might explain the 'turniness' of the skate.
I like how streamlined the mounting plate is, wish they did this for the SL carbon models. Its possible this design was a response to the trinity mount's lower ride height with some trinity frames like the endless trinity 90 lr.
They do, but the stock frame is optimised to fit perfectly with the shape of underside of the boot so you get way more height-saving advantages with the stock-frame.
compare the ride height against aeons though. Nothing fancy just put them on their wheels next to each other and visuallze. I did this with my aeons against a seba high and the difference was stunning. I wonder how this looks. Great video, as usual.
![[唯一!?]国内店舗で実物を手にしながら相談➝購入できるカーボン系スケート！](http://i.ytimg.com/vi/_-n6UUpUB84/mqdefault.jpg)
![[唯一!?]国内店舗で実物を手にしながら相談➝購入できるカーボン系スケート！](/img/tr.png)
Correction, the skate isn’t £260 like I said at 06:55 - The Neo 1 is £399 (and the Neo 2 is £260) 🙃
Excellent video! How do these compare to the FR 1's with Intuition layer? They're both at the same price point.
My feet size is 41 (EU) tried 40. Hesitating but in the end I choose to downside to 40, which was a very good decision. I feel so great in them when the Intuition liner adapted to my feet.
2:11 also the buckle is not plastic but metal, i already scratch it and it is silver below :)
Imagine aeons with this dual density tech 🤤
How would you compare the Neo 1 Intuition with the FR1 Intuition in terms of responsiveness, lets say for slalom skating? You already showed us the Neo shell is wider then the FR1 shell, does this mean the Neo is more focused on comfort and less on responsiveness? As a slalom skater I'm very interested in this.
Finally they added grip to the FR/Intuition liners 🤙 Those look so damn clean🔥
It's a metal buckle! I scratched mine and they are definitely metal :)
Great video. I bought all my skates from Loco, except a second hand pair of linerless Seba High that I put Intuitions in (Intuitions bought from Loco 😁) and a Wizard setup I bought years ago from Shoptask.
I have several pairs of Seba FR1's with different frame setups, and a "deluxe Intuition" FR1.
I do feel I prefer the older Seba FR1 boots to the FR ? But I can't put my finger on why. They feel more substantial somehow, more solid, different plastics used? Idk.
Anyway, I like the matte look of this Neo One, the dual density, especially in the top of the cuff, and the low ride height, but I'm not sure that's enough to warrant yet another pair of new skates 😁
Great review tho, covers everything well.
Love you guys.
😘
the older fr1 shells are even beefier
@@flownyc6165 they are!
Mine are 2015 and 2016 model Seba FR1's, same boot but differences in frame and liner
Ugly frames imo.
Edit: looked them up, Ugly boot too.
I'm curious how long the softer parts of the boot will last. After many sweaty skates, I'd just hope it doesn't start to degrade and fall apart. Compared to the full hard shell that is still great for me after 2 years with a LOT of skating.
Wishlist followup vid request, showing if the frames do or do not fit on other 165 boots…say…SL Freeride, FR1, FRX
Pretty certain these frames are not going to fit on any other skates. The mounting block will be in the way.
Love the format of the vid as I wait in agony for these to release in US. The size chart displayed shows neo2 and think the neo1 has a slightly different chart and shell sizing. It has been tough to get the actual official neo 1 size chart but it does exist. FR was kind enough to send when I asked.
Looks like they adjusted the mondo sizes to be a bit different on the Neo 1 chart. Makes sense, I suppose the Intuition liner would give you slightly more room in it's respective shell size because it's lower volume. Shell sizes are the same on both though obvs.
The ride height difference doesn't look as large at the heel... Can you measure that too? If true then theyve actually changed the stance you adopt, almost as you would in a hi-lo / hockey setup. Might explain the 'turniness' of the skate.
@@AlvinosTomatos Valid point. Will check!
I like how streamlined the mounting plate is, wish they did this for the SL carbon models. Its possible this design was a response to the trinity mount's lower ride height with some trinity frames like the endless trinity 90 lr.
@@CritCommanda Probably much harder to make the mounting plate like this on a carbon fiber boot though! 🙂
I really appreciate the personal touch of showing the skates on your feet while you are skating them. Great work Loco gang!
Love you getting some hard measurements/data at the end there!
@@aldolega Follow the science
where is this? looks like skating heaven
@@shifuugincii Hove, sussex
@@LocoSkates gotta move down there. im in bolton and the roads are rough, any wheels smaller than 100 is like hell
Would endless 90s frames fit these skates?
yes, they work just fine
They do, but the stock frame is optimised to fit perfectly with the shape of underside of the boot so you get way more height-saving advantages with the stock-frame.
@@LocoSkates Would love to see these on some Endless Swans. The pairing as far as ride height would be epic
compare the ride height against aeons though. Nothing fancy just put them on their wheels next to each other and visuallze. I did this with my aeons against a seba high and the difference was stunning. I wonder how this looks.
Great video, as usual.
@@udihu Will do a proper test at some point by drilling the bottom of the shell. Aeon will be close. Also… Loco Boot.
@@LocoSkatesloco boot! Excited!
we want a review on ufr street diako diaby🙏🏻
@@КириллАпакидзе Here: ruclips.net/video/2DATECUTkB4/видео.htmlsi=aElE9xvEamn1WoHP
Would you say they pretty true to Size boot wise?
09:15 🙂