Behringer X32 - X-Dante Output to PA & Monitors
HTML-код
- Опубликовано: 23 июл 2024
- The Behringer X-Dante Expansion Card or the Klark Teknik DN32-Dante Expansion Card allows the Behringer X32 to connect to a DANTE network for integrating with other consoles, wireless products, system processors, streaming devices and any other Dante enabled equipment. In this video I go through how to get the X-Dante card configured on the Behringer X32.
X-Dante Install & Configuration Video: • Behringer X32 X-Dante ...
Become a member and help support me and my channel: / drewbrashler
Find more resources and downloads at www.drewbrashler.com.
Chapters:
00:00 Intro
00:21 Overview of the Dante Setup
01:48 Routing & Set Up on the X32
06:57 Patching inside of Dante Controller
09:18 Conclusion
Products shown in this video:
Behringer X32 Full Size: imp.i114863.net/7m2gKy
Behringer X-Dante: imp.i114863.net/WDmy3X
Klark Teknik DN32-Dante: imp.i114863.net/n10XJX
Focusrite RedNet AM2: imp.i114863.net/P0LGmR
This was a HUGE help. I knew how to get Dante into the board, but I had not figured out how to get Dante audio back so I could route it using Dante Controller. It's big day 'round here!!
You make very informative and helpful videos!
Hi Drew, could you do a video to show how to multitrack record each channel directly through Dante. Then to be able to use the multitrack recording to playback into the X32 as a virtual soundcheck or sound tech training sessions etc. Thank you for your videos, they are very helpful
Hello Sir, Hi Drew. I just found out that you are a fellow ham radio amateur. I've been working in RF comms for a couple of decades now, but I also serve as a senior audio engineer in our local music club. Using the x32 with 4.06, I learned a lot from your video tutorials. So: best wishes from Belgium, and thanks for all the effort you put into producing videos that explain all things networked audio. 73 de Glenn ON4WIX dit dit
Hi Drew,
I appreciate your tutorial videos for the x32 I have learned so much from
It. Have you ever thought of recording a full version tutorial training course from beginners to advance. That would be nice to do. I would buy the course if you do it.
Is it maybe possible to do a video about the Waves Card for the X32
Thanks for this video. As I understand it, you are explaining how to send audio via Dante to external Dante devices. I have a different problem. I am getting audio via Dante into my computer running Live and Waves plugins. I want to send this back to my X32 to use as outputs of the main LR speakers. Can you explain this for me?
Thank you
This is a great video. I have a behringer wing with a dante card installed. I am sending inputs from dante into ableton live. How to I get the master out from ableton to go to obs using dante on another computer handling the church live stream?
So, though it’s post fader, would one still be able to adjust their personal IEM and not affect the main mix?
The X32....Can the front USB audio playback be routed to the P16? We can't figure this one out.
Hey Drew …is there a specific app to be used with Behringer x32 to control it remotely ?
Hey Drew, Do you think its possible to link 2 X32 consoles together to get 64 inputs and a PA using Dante?
I have the X32, Dante card, VSC, and Controller. My DAW is Presonus6 Professional. I'm trying to record rehearsals for doing virtual sound checks. The setup seems straight forward but I am only getting a signal from the first ten channels, I looks like I am getting input from the rest of the channels, but only the first 10 play back.
Good day i have a problem with my behringer x32 one of the scribble strip is not showing any display but the lcd color is working and audio is coming through .what is the cause of this problem and how can i fix it
I saw the same problem. It’s visible on this video on DCA #6 channel. Note that on latest Drew’s videos it has been fixed, or it’s another X32 board. It looks like hardware problem of this little LCD display of X32.
Good afternoon I have a question about the Behringer X32. I have the Compact x32 version. I didn’t have enough power from the built-in audio card to work in the sequencer, so I bought the Antelope zen q card, but now I’m facing a problem because I don’t understand how to set up the correct routing between the mixer and the external sound card. I use outputs behringera from XLR OUT 7/8 and send it to the INST inputs of the sound card. In Routing, I set Output Main L and Main R, respectively. The problem is that when I connect a microphone to the mixer, a signal comes to it, but not to an external card. Please tell me what I did wrong!
I'm trying to find a way to take all 32 outputs from the soundboard, adjust them as I need using EQ, effects, etc. to just a stereo out for live stream. Right not I'm using 2 channels out from the board and controlling them like I would IEMs (left and right channel) but if they make a change in the gain or EQ, etc. it effects my live stream.
I was wondering if I could use a Dante card to virtual sound card and route the output to the computer's sound card output?
Hey guys I need help for a Church Upgrade. I have Full Size X32 and would like to run Waves Superack Performer + Klang for IEMS, how would this be possible with Dante Card? Since there wont be anymore USB Out
Hindi me translate karo india me sell karna h to pls
Don’t bother with question, this guy doesn’t respond.
EXACTLY 💯
You have to pay him to respond.