This video gave me a reference to install them on my SRT8 and I can tell from experience that this is not an easy job and will test your patience. Fr Fr cap cap I was straight up not having a good time, Not Bussing. The happiness will come once you turn the car on for the 1st time.
Have you seen or heard anyone who has use the flowmaster single chamber mufflers, I think the baby flowmaster is called something like super 40 series etc,.? I was wandering if these would sound good on the hemi engines
How did you get your dipstick to mount. I couldn’t get the stock bolts to work on mine and didn’t have a bolt that would work to mount the dipstick tube?
@@mysterygarageCA hand doesn’t fit from the top. Lol. I use a 1/4” ratchet on all so far. But can’t on this one because the tube is over top the hole. 2” primary tubes. What size were yours?
I hate white cars. That being said, these chargers look badass in white! Something about the grill and headlights make it one of the best colors in my opinion! Nice ride
hey i have a 2013 pursuit with the same cai as you and I plan I ordering bbk long tubes but I was wondering do you feel a big difference or does it feel about the same
@@mysterygarageCA do you think its worth it I was going to do a stage 2 comp cam but I don't have much experience so I would haft too take it too a shop that's why I was thinking for now long tubes
@@mysterygarageCA I just got mine installed couple months ago alot more power I gapped a newer subi was back firing and being cocky so I gave him that work at the light honestly thought I was gonna lose
I went long tubes, after shorties. They're a deeper sound, 9 DCB quieter, not much changed in the butt dyno. I did race another RT with the exact mods once, he had LTS while i had shorties. I had him til 65.
This video gave me a reference to install them on my SRT8 and I can tell from experience that this is not an easy job and will test your patience.
Fr Fr cap cap
I was straight up not having a good time,
Not Bussing.
The happiness will come once you turn the car on for the 1st time.
Support the engine with a hoist and drop the subframe. It's literally half the time and work😊
Is it? Next time I have to do another set I’ll try it like that.
Have you seen or heard anyone who has use the flowmaster single chamber mufflers, I think the baby flowmaster is called something like super 40 series etc,.? I was wandering if these would sound good on the hemi engines
Nice work man!
Thank you!
How did you get your dipstick to mount. I couldn’t get the stock bolts to work on mine and didn’t have a bolt that would work to mount the dipstick tube?
There’s bolts with stud at the head or get a longer one and put washers as spacers.
Thank you great job
Do they come with a o2 bung at the top of the header like the old manifold that was one the car?
Yes
Whats up man dope seeing the car on youtube i just stumbled across the video
Whats up!
Im looking for a pcm 2015 or new for my charger if you stumble across or know anyone lmk
Did you have trouble with the passenger side top middle bolts. Can’t get them started.
No, try different tools, use wrenches and 1/4inch ratchets. Also, try to get some of them from the top.
@@mysterygarageCA hand doesn’t fit from the top. Lol. I use a 1/4” ratchet on all so far. But can’t on this one because the tube is over top the hole. 2” primary tubes. What size were yours?
Did you tune it.
I heard U can't run them with out a tune I'm about to get my done in two day..
Just wondering....
No, you don’t need a tune!
I hate white cars. That being said, these chargers look badass in white! Something about the grill and headlights make it one of the best colors in my opinion! Nice ride
hey i have a 2013 pursuit with the same cai as you and I plan I ordering bbk long tubes but I was wondering do you feel a big difference or does it feel about the same
You feel a difference on throttle response
@@mysterygarageCA do you think its worth it I was going to do a stage 2 comp cam but I don't have much experience so I would haft too take it too a shop that's why I was thinking for now long tubes
I think it’s worth it
Best bang for your buck is exhaust work and rear end swap. These cars respond great breathing better.
I recently bought some, would I need anything else to install it?
Long tubes?
Just the flange on the ends of the headers
@@mysterygarageCA do you remember what size of flanges you used?
@@KevinMartinez-yk6uj 3inch
Do you have a new number?
How much power did you make with headers
Is more like throttle response!
@@mysterygarageCA I just got mine installed couple months ago alot more power I gapped a newer subi was back firing and being cocky so I gave him that work at the light honestly thought I was gonna lose
@@christianderby806 you get that throttle response
@@mysterygarageCA I'm about to buy jay green tune
I did feel more throttle response I bet I felt more power too
How long did it take to install
Couple of hrs
Where you located and how much you charge for this job??
Pomona
Did you get a tune for it ?
No
I was the owner and yeah i got it tuned after install
Any problems with the bbk long tubes
No
@@mysterygarageCA so will the bbk flange with those cause exhaust leaks or anything
@@mysterygarageCA because that the reason I don’t wanna get them if those flanges are gonna cause exhaust leaks
Did you throw any sensor codes
You should get catalyst efficiency code
Regretting my shorties... Should've got the long tubes 😬!
Yup!
I went long tubes, after shorties. They're a deeper sound, 9 DCB quieter, not much changed in the butt dyno. I did race another RT with the exact mods once, he had LTS while i had shorties. I had him til 65.
Where did you get headers from
Online, customer brought them.
Im going to have another project for you soon
Is that a R/T
No
Should be same process
Okay so that's the big engine SRT8 no wonder
@@kevinthomas6924 no that's the police edition 5.7 hemi