This seemed so much easier then on the Durango SRT, lol took us 3 days. We are currently running Kooks headers and we think they might be leaking but not sure yet. We are getting misfires only on a cold start and getting P0300 codes and it's been bothering us for so long so wish us luck this weekend! Great video man and love that charger 👍
@@marcosmoreno7490 We used the supplied gaskets. When we took the headers off we found out the gaskets were leaking, we're pretty certain that the gasket was the problem.
@@trashdiligence5284 ok my boss at the shop I work at has been thru the problem or something cause when we ordered my headers he ordered me mopar OEM gaskets too I think I’m putting them on this weekend
@@marcosmoreno7490 Yeah I would say the OEM gaskets are going to be your best option. People say the supplied ones are just as good which is why we opted to put them on but after that I don't think we're even going to mess around with after market gaskets again lol. Did you get Kooks headers as well?
@@trashdiligence5284 yes sir, Kooks 1 7/8 I believe with catless mids, going to cut out the rear resonators/mufflers (already deleted mid muffler) also going to do a active exhaust delete cause I constantly hear it squeak open and close when driving slow and put some black powder coated dual square angled tips
Every shop I find to put a gaskets and locking header bolts on my already installed long tube headers say that they have to pull the engine and quote me a arm and a leg
Can someone explain to me how dynos work? Like wheel horsepower and a car makes *** to the crank..? I’m a little confused and I’m sorry I don’t know much about cars
Dynos measures force, torque or power & they are designed to create a load to duplicate various speed (RPM) and torque requirements. Based on this data, horse power can be calculated. This in turn provides a snapshot of the engine performance for comparison to the manufacturer’s specifications.
Where did you get your tune from and how can I get the same one? Because I plan on getting corsa long tube headers as well with catless mids and I would like to have everything ready like the tune and stuff. Also just about how much was the tune?
Hey Steve, just wondering if you can put these Corsa long tubes with a lowered charger scat. I have the corsa extreme exhaust and H&R lowering springs. Just wondering if I have enough clearance for the long tube headers?
Hey man. Question. I picked up a srt 392. I am getting a corsa extreme cat back exhaust. But I have looked everywhere for these catless mid pipes. I can’t find them anywhere. Did they discontinue.
So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.
I’ve got a 2012 Dodge Charger RT and i want the first bolt on to be bbk long tubes. Does anyone know if i’ll need a tune for just the headers? I wanted to get fbo before i got a performance tune
Honestly the headers won't bother you unless you love speeding over speed bumps.. I have Kooks Long tube headers and dropped my Challenger Scat pack wit the Eibach "Prokit " which PERFECTLY leveled the car to where Dodge should have had these cars leveled from the factory ..0 issues (it been 3 years since ), yes the headers come down and out towards the rear of the car but I rarely scrape anything so it not what you think..This isnt my you tube account im at the job but I can show you picutres on my face book Carlo Santi..Looks sick..highly recommend it+ way better handling ..
@@BEASTProjects thanks you sir ,another question I’m not getting a tune when I install these yet can I use to the o2 sensor adapters to not get a cel ?
@@BEASTProjects question buddy I installed my headers but for some reason now there’s a leak on both do u think I need to retighten the bolts again I put lock tight on them before going in as well
@@BEASTProjects thanks my guy I have the exact same charger with the exact same color and exhaust I wanted to get the long tube headers to enhance the corsa extreme !!
So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.
this video will blow up in the next 5 years
I wish it out now! lol
I’m definitely getting this set up ,when I start performance mods. Was always going with corsa but you just set it in stone for me ,thanks.
This seemed so much easier then on the Durango SRT, lol took us 3 days. We are currently running Kooks headers and we think they might be leaking but not sure yet. We are getting misfires only on a cold start and getting P0300 codes and it's been bothering us for so long so wish us luck this weekend! Great video man and love that charger 👍
I know this is old but did you use the supplied kooks gaskets or the OEM mopar
@@marcosmoreno7490 We used the supplied gaskets. When we took the headers off we found out the gaskets were leaking, we're pretty certain that the gasket was the problem.
@@trashdiligence5284 ok my boss at the shop I work at has been thru the problem or something cause when we ordered my headers he ordered me mopar OEM gaskets too I think I’m putting them on this weekend
@@marcosmoreno7490 Yeah I would say the OEM gaskets are going to be your best option. People say the supplied ones are just as good which is why we opted to put them on but after that I don't think we're even going to mess around with after market gaskets again lol. Did you get Kooks headers as well?
@@trashdiligence5284 yes sir, Kooks 1 7/8 I believe with catless mids, going to cut out the rear resonators/mufflers (already deleted mid muffler) also going to do a active exhaust delete cause I constantly hear it squeak open and close when driving slow and put some black powder coated dual square angled tips
Watched your video and knocked mine out in 4 hours. Thanks.
Glad it helped! Thanks for watching.
You are the man! Life saver. Just finished my removal today with the help of your last video. And I will do the install another day.
Glad I could help! Thanks for watching!!
Pete is a beast. That’s a real deal install.
Great video.
I got my stock manifolds out thanks to the other video now to study this video for the tips lol
If i could find a shop around me that would take their time and install these with this kind of TLC id be all over it.
Finally I was waiting for this review for a long time, thank you for sharing.
Thank you for watching!
Great work corsa is one of the best I also love Borla exhaust
Hey just wondering what the startup sounded like. I recently purchased the Corsa LTs to go along with the Corsa Extreme and Catless Mids
Stay tuned for Friday’s video. 😊
It’s hard finding anyone to install shorty header aside from a dealership.
Every shop I find to put a gaskets and locking header bolts on my already installed long tube headers say that they have to pull the engine and quote me a arm and a leg
Great video, very helpful, loved the commentary as well
Can someone explain to me how dynos work? Like wheel horsepower and a car makes *** to the crank..? I’m a little confused and I’m sorry I don’t know much about cars
Dynos measures force, torque or power & they are designed to create a load to duplicate various speed (RPM) and torque requirements. Based on this data, horse power can be calculated. This in turn provides a snapshot of the engine performance for comparison to the manufacturer’s specifications.
Where did you get your tune from and how can I get the same one? Because I plan on getting corsa long tube headers as well with catless mids and I would like to have everything ready like the tune and stuff. Also just about how much was the tune?
Check out my playlist: ruclips.net/p/PLGMOElExUdjrhN27y-OYfO05qH7o6KV-n
Can't wait for the startup!
Great job!! Thank you. Soooo how many o2 extensions are required. Both front and back?
Does it hang past the oil pan that's why I'm kinda skeptical of long tube haven't seen any videos abt that question yet
great video....great product....great look.....you know it's gonna sound great.....lol
Sweet video very informative 👌
Hey Steve, just wondering if you can put these Corsa long tubes with a lowered charger scat. I have the corsa extreme exhaust and H&R lowering springs. Just wondering if I have enough clearance for the long tube headers?
How do I get the service airbag warning light to go out?
Can you run the mid pipes without the headers ?)
Hey man. Question. I picked up a srt 392. I am getting a corsa extreme cat back exhaust. But I have looked everywhere for these catless mid pipes. I can’t find them anywhere. Did they discontinue.
Yea they did. A couple years ago. I’ve been trying to find some but haven’t had luck
@@gdelacerda4117 cornerstone performance
What size bolts are those ? To go onto the clamps ?
Great video
What size are they
Did you keep both of the braces?
Man after all that - no sound test !? Good vid though - keep up the good work
Those are nice
Is the exhaust still stock for the most part or is it all corsa
I gotta do mine but... I don't feel like it lol... It'll take a WHOLE DAY
It will! Haha
So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.
Yes, the info is in the video description...
Would lifting the engine make it easier?
Do you really need the rear o2 sensors? It should not trip the cel if they are tuned out right?
Not sure... Would make sense that you wouldn't need them if they're tuned out though.
I might've missed if you said it in the video, how much did they charge for install? They're close by to me
Hit up Andy at CCT for a quote. www.chestercountytransmissions.com
At 16:48 do you have a link to that 4 bolt flange?
Anyone know what size is the header boots mount on engine needed for installs ??
Corsa's kit comes with new header bolts.
Did you get any check engine lights after the install because I want to put mine on in the next few days but can’t get a tune until mid July
I had tuning....
@@BEASTProjects ok gotcha so I’ll probably get a light so I think I’ll just wait
Where did you get your tuning done because my check engine light came on a day after they were installed
DiabloSport or Hemifever can get you all set up.
you just need a 02 sensor spacer if you dont want to spend hundreds on a tune or dont plan on future mods, other wise yes you will need a custom tune
Do you think this will fit in a v6? 2018 Dodge charger sxt
No
I’ve got a 2012 Dodge Charger RT and i want the first bolt on to be bbk long tubes. Does anyone know if i’ll need a tune for just the headers? I wanted to get fbo before i got a performance tune
It's best to get them tuned I'm getting along two headers added on my vehicle this month going to holler at my muffler dude 2 day
Is the car lowered? Was thinking of going LT but I'm worried I'll be too low with lowering springs.
It’s bagged...
Honestly the headers won't bother you unless you love speeding over speed bumps.. I have Kooks Long tube headers and dropped my Challenger Scat pack wit the Eibach "Prokit " which PERFECTLY leveled the car to where Dodge should have had these cars leveled from the factory ..0 issues (it been 3 years since ), yes the headers come down and out towards the rear of the car but I rarely scrape anything so it not what you think..This isnt my you tube account im at the job but I can show you picutres on my face book Carlo Santi..Looks sick..highly recommend it+ way better handling ..
Sir gotta question I have a cat back corsa extreme I want To put some long tube Corsa headers . Do i just need Corsa headers no extra pipes.
I’m pretty sure you’ll need the mid pipes also , I think he bought a kit that includes both LTH and mid pipes .
I don’t think he answers any questions on the charger anymore since he got rid of it. I miss the charger vids they were very informative.
Will you guys have the Gueston and Bell at the Chrysler Nationals?
We might swing by one of the days w/ Gaston.
That would be awesome. I'm a local guy I see your vehicles around all the time. We actually sort of raced down 82 the one time.
Where’s the removal video ?
Are these 1 7/8 or 1 3/4?
Will this setup work with the 6.2L hellcat Charger?
They have a kit for the 6.2 Hemi.
Just past you in the jeep lol
We just picked up crabs from Hill Top.
I hope there's big horsepower gain for all that work.
Me too! Haha
Does this pass inspection?
Did you buy the o2 sensors separate?
Nope, used the stock ones.
Did you have to delete the converter? I didn’t see
Removed them
@@BEASTProjects this kit comes with converters?
No
What’s that tool called that he used to spread the xpipe ?
Expander Kit, amzn.to/3r5k2tt
@@BEASTProjects thanks you sir ,another question I’m not getting a tune when I install these yet can I use to the o2 sensor adapters to not get a cel ?
No guarantee that it won’t throw a CEL w/o tuning for off-road use.
@@BEASTProjects question buddy I installed my headers but for some reason now there’s a leak on both do u think I need to retighten the bolts again I put lock tight on them before going in as well
so i shouldn’t put this on if i daily the car ?😂
How does it work with active exhaust
Just fine
@@BEASTProjects so how does it work, is it eliminated or stays in place
The valves stay in place.
The exhaust valves are incorporated in the Corsa Systems. It’s shown & explained in a prior video.
@@BEASTProjects I had clicked on this video first, I’ll check the other vids to see the install, thanks
Are you going to dyno it again?
If my schedule ever frees up... I'm dying to get back to Maple Grove Automotive, LLC
1,300 or 13k
start up Video?
Full blown review & comparison video coming this Friday at 6pm.
Is there any way to get these still ?
Maybe, if you can find a company that has old inventory.
@@BEASTProjects thanks my guy I have the exact same charger with the exact same color and exhaust I wanted to get the long tube headers to enhance the corsa extreme !!
Check my website for the discount code.
Did you get any check engine light ?
Nope, I have tuning
@@BEASTProjects what happen if we don’t get a tune
You might get a check engine light
@@blkedout_3928 if you get a spacer fir the secondary sensors you will not get a check engine light
@@adorno1010 bet bro thanks 💯
I need a tool list
LOL
Big Job but it look nice and I know it going to sound Bad A$$
First hey guys !!
Again with the teaser! Ugh
This Friday is the review.
So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.
Correct, cat-less mid collector pipes.