I run mine on a A520M board and am thoroughly impressed at how this bad boy is hitting 5.2ghz on 4 cores and 4.9 on 2 cores on stock. I can't really do much messing around with this mobo but will watch it anyway
Other notes: ofc enable XMP(DOCP) profile if you haven't. You can also enable Precision Boost Overdrive (via BIOS or software) for a pretty hefty FPS increase (though note this is overclocking and may cause system instability) - e.g. I was getting 90fps in LoL and enabling PBO took me to 125. This made the game feel considerably smoother and reduced input 'lag'.
Great tip. Furthermore, AMD warranty does not support overclocking. People doing this should be very mindful of that if crashes or even system failure occur.
U dont even know how mutch u helped me ive been trying to make my pc works for weeks and i only needed to unlock ram but i didint know how tanks you so mutch man❤
thank you I've been searching to increase my GPU vram on this brilliant CPU, was stuck on 512 mg but now have 4.0 gb, most other videos show just one bios option but your explanation was very helpful, keep up the good work .. many thanks
You have no idea how much this helped me, this is my first build and when i started playing a game, i was running at 20 fps max sometimes dropping to 10. After this, i get 144 fps consistently. I am so thankful for this video! +1 like & +1 sub
@@ghost8417 if you leave the voltage on auto it fluctuates. 1.1V would be safe to lock it to, most say you can lock it to 1.2V. 1.1V should support 2200-2300mhz of the igpu. From my sample of two 5600G processors.
I'm using an ASRock 320m board, it also has rebar, though is unstable with 4G enabled. Rock solid with ReBar and no 4G though, and running 3600 memory that was XMP rated for Intel, so call me impressed.
Courtesy notice to anyone who can still make the change: I can't enable the Resize Bar option myself since my SSD is formatted as MBR type instead of GPT. This means I can't turn on UEFI for my boot option, I must have CSM as my boot option. I understand that it's a hassle to change the format of my drive to GPT so I just won't do it now, but in the future I will make sure my drives are GPT.
Experimented with using an RX 580, had a few issues but finally got some stability. AMD really do need to sort out that 0 RPM options though, terrible idea.
It will help if you're thermal throttling (going to 100C) and the cpu downclocking so most of the time you should be fine. But if you run any cpu intensive programs then would be worth upgrading.
I’ve always been confused on this subject. If I have a dedicated card now, but still use the Ryzen 5 5600g as my cpu do I need any of the software or drivers?
You do not have to do UMA frame buffer resizing if you don't have any good reason. Explanation: Your iGPU can already access upto half of your RAM as it's "VRAM". As soon as the preset "Dedicated Video Memory" exceed, your RAM will automatically be used to cover the excess. I have set Dedicated memory from 512MB to 64MB, and no visible benchmark difference was found. I had to do this to play Darksiders 3 properly, as the game auto loads Low Quality textures ignoring all configs if it detects just 512 MB VRAM; as soon as I either increas it to 2 GB or go below 128 or to 64MB, it auto loads normal textures and use it's required VRAM (auto use 2GB+ memory as VRAM, auto allocates upto half of RAM as VRAM). Thus I conclude that unless you have such specific usage cases, you don't have to adjust UMA Frame Buffer a.k.a, dedicated Video Memory.
Hey my motherboard Bios only shows up to 2GB option in the vram settings (frame buffer size). I use a B4500 AII, can anyone recommend a not so expensive motherboard that allows +2GB?
while reinstalling windows change the format of the drive .. mine was something fat32 if u change it to gsm or cdm i don't remembe the name.. it works oh wait i realised ur comment was two years ago.sorry too late ig
How are your temps so low?. My 5600g runs at 48c iddle. Any idea on how to fix this?? Also whenever I resize bar the boot drive disappears and I can’t boot into windows.
How is the process called to increase VRAM für the APU? I found nothing on My gigabyte x570 Bord…. No frame buffer size, no UMA or anything…. Edit: you need to first set other parameters to see the UMA setting and you downloaded the wrong driver. You can’t see the last number on the CPU you selected and you downloaded the second one which is the GE not the G driver. To check the version scroll down on the selected site and check the Product Box Id
How do I turn on Multi-threaded rendering on bios since I play valorant in integrated graphics, and it the 'Multi-threaded rendering, on or off' doesnt show up. I also have the same CPU RYZEN 5 5600G
You have to test it bro. From the multiples reviews that I've seen, some use the stock cooler with no problem. Sometimes just tweaking the fan curve on the bios is enough. I went with a 4 heatpipe cooler, it's not expensive and I can overclock a lil bit with no problems
Hello I tried to change my settings and now my pc doesn't boot . I changed my cpu frequency to 3600mhz too and I think that is the problem but I can't change it back to what was before
I recently got the 5600g but i an not able to get any good FPS, when i do Heaven beach test it gets abt 17fps. i have a B550 elite updated bios and chip drivers
Sounds to me like you haven't installed the AMD IGPU drivers. Check on CPU-Z, if it doesn't say Radeon Graphics and says some variant of Microsoft or Windows display Adapter, it isn't set up right.
Have u ever encountered after boot up. Minutes later, the pc starts to glitch or freeze displays weird artifacts on the screen. Only way to do is to restart the pc. Then after the restart the radeon driver is gone on the system and have to reinstall it again. Just wondering
its not working have same apu processor have activated resize bar support but its not showing in device manager and amd software also vram adding 2 gb is not giving any performance
When your pc is booting, press and hold F2, or del, or another Functin key, (it depends on your motherboard brand). Then, you will be able to access BIOS
why wouldn't you enable Precision Boost Overdrive? It's one of the most epic things you can enable and this will get you the best performance out of your CPU... sad that you didn't even say anything about it :/
Technically, yes. But as long as you find a resource that shows simple, reasonable, conservative overclock settings for your exact processor/RAM, you should be fine. Honestly, for RAM, simply enabling SMP will help a lot and for most people is probably enough. In my opinion, BIOS are not to be feared, but rather respected and appreciated for what they allow us to do. Use common sense and don't change a setting unless you understand what it will do.
Hola bro una consulta, tengo el 5600g y estoy hace meses con el problema de ah surgido un error en el controlador de la grafica, alguna solución? Saludos desde argentina
I have x570 r5 5600g 3200mhz ram 600w and when i play fortnite its 144 fps but it shows like 30 60 fps and sometimes fps drop it’s unplayable can somebody help me
Hi! I mounted a pc with the config: aorus b450m motherboard; ryzen 5 5600g; 16gb RAM (2x8) fury beast 3000mhz; SSD 512gb. However, there are some "stucks" during games, even playing at more than 200fps, I updated the drivers, I did everything right, but I don't know why. If I play and open the browser, it gets kind of jagged too. Is this some configuration/optimization issue? The processor is cold and does not go beyond 55% usage.
@@armaantyagi6854 hey mr smart im playing on a520m apro and its smooth like silk and i have a freind of mine that runs it on a a320m and no problem u should update your brain budd
Sadly this can happen sometimes, Unfortunately our optimization guides aren't always be all and end all solutions, there are times where certain PC configurations just don't work as well with optimizations, but we do encourage you to go out and find you own optimizations and comment down below to help others like yourself!
@@hagneroliveira2415 Yeah its working good. As the convo is going on then I would like to ask that at what speed your memory/ram is working and what the actual frequency is? Mine are 2x 8gb 3200mhz but running at base speed of 2666
I changed my UMA setting to 4gb but it is still showing 512 mb in task manager ........Please suggest a solution (AMD 5600G, B550m gigabyte and 16 Ram)...
at least 1660 or at max 3090... going 4000 might not be enough on some settings of games at it might get CPU bottlenecked. Suffice to say, anything higher or equal to 1660 would be decent. Lower than that might cause you to play on all low res and 1080p only so you wont have any input lag
buffer only affects how much memory windows can't "use" as anything other than GPU memory. You can just leave it at 4gb and if the system needs more, it'll ask for more
You can leave it on, it's compatibility support so provides support for older hardware. So if it doesn't work off, leave it on, it should only affect boot time
I run mine on a A520M board and am thoroughly impressed at how this bad boy is hitting 5.2ghz on 4 cores and 4.9 on 2 cores on stock. I can't really do much messing around with this mobo but will watch it anyway
NN J uuu cc c🗣️😩🗣️😈🗣️😩🐥🐥😩😩😅
HOW THE FUCK TELL ME YOUR OC SETTINGS PLEASE, WHAT COOLER ARE U ALSO USING
Other notes: ofc enable XMP(DOCP) profile if you haven't.
You can also enable Precision Boost Overdrive (via BIOS or software) for a pretty hefty FPS increase (though note this is overclocking and may cause system instability) - e.g. I was getting 90fps in LoL and enabling PBO took me to 125. This made the game feel considerably smoother and reduced input 'lag'.
Great tip. Furthermore, AMD warranty does not support overclocking. People doing this should be very mindful of that if crashes or even system failure occur.
@@eightleggedanarchistjust revert the CPU to stock or any traces or evidence of overclocking and you should get the warranty back
U dont even know how mutch u helped me ive been trying to make my pc works for weeks and i only needed to unlock ram but i didint know how tanks you so mutch man❤
i got a 600w psu with r5 5600g and rx 6600 should i turn that setting on? im playing competetive so i need the fps and low input delay
Great guide, needed exactly this. I do have a gigabyte B550 but managed to find the same set of configs from the menu.
Which setting you did i have the same
thank you I've been searching to increase my GPU vram on this brilliant CPU, was stuck on 512 mg but now have 4.0 gb, most other videos show just one bios option but your explanation was very helpful, keep up the good work .. many thanks
You have no idea how much this helped me, this is my first build and when i started playing a game, i was running at 20 fps max sometimes dropping to 10. After this, i get 144 fps consistently. I am so thankful for this video! +1 like & +1 sub
Glad I could help!
what game was
thats impossible lol
kinda sus did you perhaps buy a gpu? this is impossible my friend
@@versethy in possible bc he dont have any software before of apu
came across this, perfect !!.. thank you
getting mine soon, thanks for the vid now i know what to do
Glad I could help!
Got mine today.. Will be doing this later.
Thank you. This will be useful and helpful.
awesome guide, straight to the point !!!
I need help, i did everithing that the video said and now my pc is not showing image
When I follow this guide my system boots back into bios evertime
Mines as well
@@etaui3449 maby press on reset button on front io
Tnxxx here is my sub❤❤❤
Thanks, pal. :D
You have made my day sir! Would you also recommend overclocking?
if u motherboard supports it u can do it, but in my opinion its not good for apu health
@@wonka430 You can find the highest stable overclock at stock voltage and harm nothing.
@@robertkubrick3738 tell her
@@robertkubrick3738 cuál es el voltage estándar de el Ryzen 5 5600g?
@@ghost8417 if you leave the voltage on auto it fluctuates. 1.1V would be safe to lock it to, most say you can lock it to 1.2V. 1.1V should support 2200-2300mhz of the igpu. From my sample of two 5600G processors.
Ty! Works now!
That is why I love this Channel they always have a way of helping us 🇿🇦
theres no way to help ya,amd fanboys,u r mental
@@advancedmomuser-kb2qn🤡L
I'm using an ASRock 320m board, it also has rebar, though is unstable with 4G enabled.
Rock solid with ReBar and no 4G though, and running 3600 memory that was XMP rated for Intel, so call me impressed.
Thanks for this guide. BTW, how did you manage to get your idle temp at 31 C?
Resize bar wont work if you dont have dGPU
Courtesy notice to anyone who can still make the change: I can't enable the Resize Bar option myself since my SSD is formatted as MBR type instead of GPT. This means I can't turn on UEFI for my boot option, I must have CSM as my boot option. I understand that it's a hassle to change the format of my drive to GPT so I just won't do it now, but in the future I will make sure my drives are GPT.
this needs to be pinned. my system is stuck on bios, only way to bypass it is to disable resize bar again.
Experimented with using an RX 580, had a few issues but finally got some stability.
AMD really do need to sort out that 0 RPM options though, terrible idea.
Sounds like PEBKAC to me pal. This video is about gaming with an igpu not a discrete gpu.
i have set the UMA frame buffer size to 2gb but it just stays at 512mb. What to do? There is no error massage or grayed option
Will a better CPU cooler other than the stock one included, help with performance?🤔 Thanks for the update 🤓
It will help if you're thermal throttling (going to 100C) and the cpu downclocking so most of the time you should be fine. But if you run any cpu intensive programs then would be worth upgrading.
@@WePCBenchmarks not a big gamer, but got the 5600G as the GPU market is still not in my PC budget! Thanks
I have ordered mine and i only play valorant will it be good for competitive gaming for longer hours
@@SleepyGiant1 I got the Cooler master 212 black hyper. Have not started my PC build yet, but I got my RAM, so I am ready!
@@j.lietka9406 nice 👍 mine will arrive after 6 days
thanks 😸
I’ve always been confused on this subject. If I have a dedicated card now, but still use the Ryzen 5 5600g as my cpu do I need any of the software or drivers?
what is your motherboard for ryzen 5 5600g
He is using ROG Strix B550-XE Gaming WiFi. His full PC specs are listed in description if you want to check them out.
Buy lossless scalling and use it. It's worth it especially for iGPU
for some reason my amd software adrenalin doesnt show most settings.
You do not have to do UMA frame buffer resizing if you don't have any good reason.
Explanation: Your iGPU can already access upto half of your RAM as it's "VRAM". As soon as the preset "Dedicated Video Memory" exceed, your RAM will automatically be used to cover the excess.
I have set Dedicated memory from 512MB to 64MB, and no visible benchmark difference was found.
I had to do this to play Darksiders 3 properly, as the game auto loads Low Quality textures ignoring all configs if it detects just 512 MB VRAM; as soon as I either increas it to 2 GB or go below 128 or to 64MB, it auto loads normal textures and use it's required VRAM (auto use 2GB+ memory as VRAM, auto allocates upto half of RAM as VRAM).
Thus I conclude that unless you have such specific usage cases, you don't have to adjust UMA Frame Buffer a.k.a, dedicated Video Memory.
thanks for the comment. helped me understand how this works.
So i will just leave it on auto? 2gb to be exact.
You'll get a lot more FPS if you upgrade that memory, I'm using 32GB of 3600 that I picked up in the US for $80.
I did everything the same, but GPU-Z says "Resizeable BAR disabled" because of "Unsupported GPU". Probably it only affects dedicated GPU?!
Hey my motherboard Bios only shows up to 2GB option in the vram settings (frame buffer size). I use a B4500 AII, can anyone recommend a not so expensive motherboard that allows +2GB?
Hello I got the msi a pro it’s only 120-160 so it’s not to bad
I am very happy with it
only active resize bar and its appear
Seguramente tienes 16gb de ram si aumentas a 32gb te deja poner hasta 8 gb
you need to disable CSM support. This will unlock more VRM
When i disable csm my windows is not launching anymire
while reinstalling windows change the format of the drive .. mine was something fat32 if u change it to gsm or cdm i don't remembe the name.. it works
oh wait i realised ur comment was two years ago.sorry too late ig
Which software u used to record this video?
I cant enter my BIOS. everytime I attempt via bios key or other methods it just says INPUT NOT SUPPORTED
i have i problem with my software where it gets bugged every few days and i have to reinstall it everytime
What's the boost of Ryzen 5 5600g from 3.9 GHz to 4.4ghz and it's not overclocking right?
How are your temps so low?. My 5600g runs at 48c iddle. Any idea on how to fix this?? Also whenever I resize bar the boot drive disappears and I can’t boot into windows.
My Ryzen 5600g never more than 45 C°, check your cooler and thermal paste
Impatiently waiting for my favorite games to implement FSR :/
Same, at home I have a 10 series nvidia GPU so can't even use DLSS so hoping for more FSR implementation.
How is the process called to increase VRAM für the APU? I found nothing on My gigabyte x570 Bord…. No frame buffer size, no UMA or anything…. Edit: you need to first set other parameters to see the UMA setting and you downloaded the wrong driver. You can’t see the last number on the CPU you selected and you downloaded the second one which is the GE not the G driver. To check the version scroll down on the selected site and check the Product Box Id
I had this issue as well. under iGPU option I changed it to "forced" then a list of other options appeared.
I have a Gigabyte Aorus B550 Elite V2. I cannot find similar settings
Can this modification be bad on my hardware or nah?
How do I turn on Multi-threaded rendering on bios since I play valorant in integrated graphics, and it the 'Multi-threaded rendering, on or off' doesnt show up. I also have the same CPU RYZEN 5 5600G
Do I need a pro cooler to do this optimization ? Or the stook cooler is enough? Please answer me 🙏🏽
You have to test it bro. From the multiples reviews that I've seen, some use the stock cooler with no problem. Sometimes just tweaking the fan curve on the bios is enough. I went with a 4 heatpipe cooler, it's not expensive and I can overclock a lil bit with no problems
Bro i hope you get a million views on your vid3is
Hello I tried to change my settings and now my pc doesn't boot . I changed my cpu frequency to 3600mhz too and I think that is the problem but I can't change it back to what was before
Quita la batería de la placa y la desconectas de la corriente esperas 5 segundos y la conectas y enciendes
How about amd ryzen 7 5770g , same for this?
Gaming Live streaming with 5600G in Streamlabs which encoder should I choose Software based x264/Hardware based gpu for better streaming quality?
cpu ussally dosentdo anything so x264 the way
I used hardware for streaming, just check my channel to see the result
Right after i did this my screen, my keyboard and my mouse won't turn on, i need help 🥺
Yo, should i switch my i5 10500 for the ryzen?
Unless you're using integrated graphics don't think there is a need to upgrade from a 10th Gen Intel
Go for 5600x instead
@@topisalonen8813 bad value for money ryzen 5 5600g is 10% slower that the ryzen 5 5600x but the ryzen 5 5600g is $230 and the ryzen 5 5600x $320.
@@pippingym Both of those are bad value if you compare them to i5 12400
@@pippingym and btw, in here ryzen 5 5600g = 250€ ryzen 5600x = 285€ so i would pay 35€ for the 10 percentage
I recently got the 5600g but i an not able to get any good FPS, when i do Heaven beach test it gets abt 17fps. i have a B550 elite updated bios and chip drivers
found anything that solved your problem?
Sounds to me like you haven't installed the AMD IGPU drivers. Check on CPU-Z, if it doesn't say Radeon Graphics and says some variant of Microsoft or Windows display Adapter, it isn't set up right.
download the drivers and do what it says in this video for bios. it worked for me.
Same problem
So is this around the same settings for the built in Radeon graphics
I need tutorials for undervolting this cpu, can you make one? Thanks
Does resize bar raise motherboars or cpu temperature? I have 5600G and Asus prime b450m A ii
I have the same 💀
TO WHAT SHOULD I SET MY UMA FRAME BUFFER SIZE
when i turn on the ReSize Bar option my ssd stop working
help
Will This Work The Same For 5500U?
why when you turn it on Resize bar PC runs in the BIOS
hey man i did exactly as you showed but when i do this settings my pc cant find boot media but if i load default settings it can find it
Have u ever encountered after boot up. Minutes later, the pc starts to glitch or freeze displays weird artifacts on the screen. Only way to do is to restart the pc. Then after the restart the radeon driver is gone on the system and have to reinstall it again. Just wondering
when i disable csm mode my ssd samsung evo 870 wont show up as boot device
its not working have same apu processor have activated resize bar support but its not showing in device manager and amd software also vram adding 2 gb is not giving any performance
how do i even get to where he is at the beginning
When your pc is booting, press and hold F2, or del, or another Functin key, (it depends on your motherboard brand). Then, you will be able to access BIOS
Is there any point in downloading all the drivers? or just the most recent?
Most recent drivers bios and drivers are always recommended!
@@WePCBenchmarks any difference in radeon driver versions?
@@WePCBenchmarks please does asus tuf gaming b450 m pro s supports upgrading vram to 8 gb
why wouldn't you enable Precision Boost Overdrive? It's one of the most epic things you can enable and this will get you the best performance out of your CPU... sad that you didn't even say anything about it :/
CPU will never be the limiting factor on this APU.
❤❤❤
Hello! Does this work for a 4650G too or are there another steps that I should follow?
4650G is locked pretty sure you can't rlly do much
Bro please help😭me my screen gone tootaly black after I applied all the settings. How do I reset to normal please help me bro
isn't rebar only supported on gen.4 pcie?
just a curious question, what if I did something wrong, will it destroy my cpu?
Technically, yes. But as long as you find a resource that shows simple, reasonable, conservative overclock settings for your exact processor/RAM, you should be fine. Honestly, for RAM, simply enabling SMP will help a lot and for most people is probably enough. In my opinion, BIOS are not to be feared, but rather respected and appreciated for what they allow us to do. Use common sense and don't change a setting unless you understand what it will do.
My sometimes automatically restarts when i use emulator. Can someone help
guys u r 5600g ? has higher cpu usage ??
Hola bro una consulta, tengo el 5600g y estoy hace meses con el problema de ah surgido un error en el controlador de la grafica, alguna solución? Saludos desde argentina
Que problema tiene usted
Te funciona en un principio al instalarlo y luego te salta el cartel de amd con el problema? Cuanta más detalles...
¿Cuál es tu motherboard? ¿Qué memoria tiene instalada? ¿Què perfil de memoria elegiste? ¿Flasheaste el Bios para tener la última versión compatible?
Sir I am gonna buy msi Mpg gaming plus b550 motherboard will it be good or I should go with msi mag mortar b550
Is that overclocking
This can be useful in general or just for gaming?
Can be helpful in general!
Perde a garantia?
for some reason, my pc can't boot up when I disable the CSM, is there anyway to fix tha
I have x570 r5 5600g 3200mhz ram 600w and when i play fortnite its 144 fps but it shows like 30 60 fps and sometimes fps drop it’s unplayable can somebody help me
Hi!
I mounted a pc with the config: aorus b450m motherboard; ryzen 5 5600g; 16gb RAM (2x8) fury beast 3000mhz; SSD 512gb.
However, there are some "stucks" during games, even playing at more than 200fps, I updated the drivers, I did everything right, but I don't know why. If I play and open the browser, it gets kind of jagged too. Is this some configuration/optimization issue? The processor is cold and does not go beyond 55% usage.
update bios and disable fTPM. good luck.
you opted for a cheap motherboard that's what you'll get
@@armaantyagi6854 b450m not that bad wdym
@@armaantyagi6854 hey mr smart im playing on a520m apro and its smooth like silk and i have a freind of mine that runs it on a a320m and no problem u should update your brain budd
Well this made my game performing worse lol
Back to default and I gained back ca 15fps.
I have updated B450 Tomahawk Max 2
Sadly this can happen sometimes, Unfortunately our optimization guides aren't always be all and end all solutions, there are times where certain PC configurations just don't work as well with optimizations, but we do encourage you to go out and find you own optimizations and comment down below to help others like yourself!
@@WePCBenchmarks I appreciate the fact that you actually talk about the problems instead of going away and ignoring the issue explained by a viewer.
Does enabling XMP void my warranty?
nope, nor for the dimms nor for the mobo
How do you launch bios ??
boot youre system while spam pressing the del key on youre keyboard, if you want to get out of bios just restart youre pc.
why it shows in amd adrenalid 512 vram if i have 4gb on ryzen 5 5600g
gigabyte b550i auros pro ax ??? help i need more igpu memory
How much vram should I allocate to igpu if I've
2x 8gb 3200mhz ram?
same here, I put 3GB and it is working just fine for me
@@hagneroliveira2415 i am using it at auto (512mb) but don't know why in gta v graphic settings vram is available upto 8 gb.
@@hagneroliveira2415 even after changing it from auto to 2Gb it was still 8gb (7.8gb in actual). And then i restored it back to auto.
@@Saurav.K that's weird, but if it works well then there's no problem I guess
@@hagneroliveira2415 Yeah its working good.
As the convo is going on then I would like to ask that at what speed your memory/ram is working and what the actual frequency is? Mine are 2x 8gb 3200mhz but running at base speed of 2666
My pc crashed and doesn’t work anymore I turned on the 4gb option and the thing below it
Pls help
just try to flash bios with a button behind your pc.
I changed my UMA setting to 4gb but it is still showing 512 mb in task manager ........Please suggest a solution (AMD 5600G, B550m gigabyte and 16 Ram)...
I guess you didn't save the settings.
at me there is only preccesec no preccesors with graphics
What is the best GPU to pair with?
at least 1660 or at max 3090... going 4000 might not be enough on some settings of games at it might get CPU bottlenecked.
Suffice to say, anything higher or equal to 1660 would be decent.
Lower than that might cause you to play on all low res and 1080p only so you wont have any input lag
any difference in radeon driver versions?
Can someone explain this to me, does what's happening in the video count as overclocking or not, so can i try this on the MSI 450M-A
So, if I had 64gb of system ram, is there a performance advantage between maxing out the frame buffer to 16gb or leave it at say 8gb?
buffer only affects how much memory windows can't "use" as anything other than GPU memory. You can just leave it at 4gb and if the system needs more, it'll ask for more
can this optimazation can be done on GIGABYTE B550M DS3H rev. 1.1 ?
Can you like breathe?
ong 😭
I am new to building pcs and stuff, i am gonna build mine soon but with gigabyte motherboard is it gonna be the same thing ?
so... have u build ur pc yet?
Is it overclock?
If i have resize bar (on/off) i need to do the next steps?
What will happen if i leave csm tab because it wont boot up if its turned off
Im still on hdd
You can leave it on, it's compatibility support so provides support for older hardware. So if it doesn't work off, leave it on, it should only affect boot time