Relatively new to wrenching on my motos, but installed 14” FBI bars on my ‘22 RKS last winter, and found it to be a pretty smooth process. Saved big money over the estimate from my local dealership. Have about one year and 10k miles on them, and continue to be a big fan.
This is really too much If that's the case you might as well just extend the clutch and the brake cable with new longer cables yourself because your doing the same process just shorter cable smh
Great video! I just got same bars for my 22 road glide st and I don’t have half clamp on my left side (cloche side) and now I have hole exposed. Surprise Fat Baggers don’t send you that, since they know that 22 Road Glide ST doesn’t have it.
Here are some extensions 👉🏽 fatbaggers.com/new-billet-aluminum-clutch-cable-housing-upgrade-18-22-softails-21-23-touring-roadking-models 👉🏽 fatbaggers.com/ez-clutch-adjustor-upgrade-kit
Thanks for this video.. I was nervous to do my own but I was able to pick up a few great tips in this video and now know exactly what to order.. I’ll also be upgrading to the Fatbaggers ez clutch adjuster while I’m working on the handlebar upgrade… Thanks
Thank You! I would upgrade your bushings every time to polyurethane bushings. I covered that in this video ruclips.net/video/8aGaY_08x7Y/видео.htmlsi=y8KfbOGolZmK2Vji
Where tf were these when I did my bars Got the chizzled Lo bars from Harley Running the wires for the controls and heated grips … fml Took 6 damn hrs to do
Thanks for an excellent video! This will definitely help when installing mine. I'm getting ready to order the same 14" bars for a 2020 Road Glide Limited and I contacted FBI about brake and clutch, hydraulic extensions. They said I wouldn't need the extensions, but I noticed you used them. Do you think it would've been possible to do the install without?
Thank You! I really appreciate the support. Congrats on the new bars. Now, it could be possible to reroute your brake and clutch lines, and you wouldn’t need them. I did a video on the 14” TAB Performance bars, where I rerouted them ruclips.net/video/Nkv_HS2q4jA/видео.htmlsi=0hhkbUyCfjQ8FFJb
Hello question do you know how good their warranty is I just finished installing mine like 30mins ago and realized it a short in the wire on the start side wiggle the wear it works it's like it was pinched
So i have a hydraulic clutch and I had to prime the line from the enclave but I had a cut wire on my switch so I had to take the bars apart and now my clutch handle will not adjust…. I used a whole bottle of DOT 4 an still nothing …
@@RAIDERWORLD my bad Devil, I was hoping you could help me troubleshoot the issue, do you think I have something obstructing the lines because it pressures up when I’m squeezing Dot 4 into the Enclave with a syringe?
@@ChanceChelios unfortunately, that’s something I swould have to get my hands on to know what’s going on. Sometimes you have to take the primary cover off and adjust the clutch on that side.
@@RAIDERWORLD I think im explaining it wrong, when I squeeze my clutch there is no much play, there is no tension at all, last time I did this I primed it up and it felt normal this time it seem to not want to prime up the line.
Relatively new to wrenching on my motos, but installed 14” FBI bars on my ‘22 RKS last winter, and found it to be a pretty smooth process. Saved big money over the estimate from my local dealership. Have about one year and 10k miles on them, and continue to be a big fan.
That’s awesome! Wrenching on your own bike is what it’s all about. Definitely saves you a lot of money 💰
This is really too much If that's the case you might as well just extend the clutch and the brake cable with new longer cables yourself because your doing the same process just shorter cable smh
@@RAIDERWORLDdo these bars go straight out at the handle or curve in
Best install video I have seen for bars. Thank you!
Thank You! I appreciate the support 🤘🏽
Wow.... affordable 1.5 inch bars. I like the specs and the tech.
Good find!!
Absolutely!
Great video! I just got same bars for my 22 road glide st and I don’t have half clamp on my left side (cloche side) and now I have hole exposed. Surprise Fat Baggers don’t send you that, since they know that 22 Road Glide ST doesn’t have it.
That is strange. Hopefully they fixed this issue.
I liked what I see on your video. When I checked their website, price is over my budget.
Thank You for watching! You definitely get what you pay for.
Dang I wish they made this extension for softail models.
Here are some extensions
👉🏽 fatbaggers.com/new-billet-aluminum-clutch-cable-housing-upgrade-18-22-softails-21-23-touring-roadking-models
👉🏽 fatbaggers.com/ez-clutch-adjustor-upgrade-kit
Impressive engineering on these bars. Excellent video.
Absolutely! Very well made and the design is top notch
Thanks for this video.. I was nervous to do my own but I was able to pick up a few great tips in this video and now know exactly what to order.. I’ll also be upgrading to the Fatbaggers ez clutch adjuster while I’m working on the handlebar upgrade… Thanks
That’s awesome! I’m glad this video was helpful. Thank You again for supporting the channel 🤘🏽
Great video, love it. Thanks for sharing! Will definitely get it for my Road Glide ST……👍🤟
Thank You! Glad you enjoyed the video. Definitely an awesome set of bars
Dam those bars are nice! Might have to get a set. Badass video. Great attention to detail brother!
Thank You! Glad you enjoyed it. Had a lot of fun with these
Great job, loved the step by step 👍🏼
Thank You! Very much appreciated 🤟🏽
Great vid!
Thank You!
Great video I'm ready to install, do I need to upgrade handle bar bushings
Thank You! I would upgrade your bushings every time to polyurethane bushings. I covered that in this video ruclips.net/video/8aGaY_08x7Y/видео.htmlsi=y8KfbOGolZmK2Vji
Looks good. ✌️👊👍
Thank You brotha!
Where tf were these when I did my bars
Got the chizzled Lo bars from Harley
Running the wires for the controls and heated grips … fml
Took 6 damn hrs to do
Haha! Yeah, some bars are not created equal. The smooth bore definitely helps out. I also had to do it twice, because I forgot the adapter
Great video as always 🔥🔥
The bars look great 🔥🔥
Thank You! I appreciate the support. These bars turned out great
Great job I don’t want to even know how long it took to edit this 😂
Thank You brother! It definitely took a bit haha 😆
Would it be advisable to pull the main fuse before starting to work on the bars?
I pull the main fuse every time, I just don’t show it on every video. I also disconnect the negative battery cable
Thanks for an excellent video! This will definitely help when installing mine. I'm getting ready to order the same 14" bars for a 2020 Road Glide Limited and I contacted FBI about brake and clutch, hydraulic extensions. They said I wouldn't need the extensions, but I noticed you used them. Do you think it would've been possible to do the install without?
Thank You! I really appreciate the support. Congrats on the new bars. Now, it could be possible to reroute your brake and clutch lines, and you wouldn’t need them. I did a video on the 14” TAB Performance bars, where I rerouted them ruclips.net/video/Nkv_HS2q4jA/видео.htmlsi=0hhkbUyCfjQ8FFJb
@RAIDERWORLD great, thanks! I'll check it out
Hello question do you know how good their warranty is I just finished installing mine like 30mins ago and realized it a short in the wire on the start side wiggle the wear it works it's like it was pinched
I would contact Fat Baggers. I’m not to sure about thier warranty
Antler bars.
👍🏽
So i have a hydraulic clutch and I had to prime the line from the enclave but I had a cut wire on my switch so I had to take the bars apart and now my clutch handle will not adjust…. I used a whole bottle of DOT 4 an still nothing …
That’s unfortunate! Sometimes these things happen. Hopefully you got it all taken care of
@@RAIDERWORLD my bad Devil, I was hoping you could help me troubleshoot the issue, do you think I have something obstructing the lines because it pressures up when I’m squeezing Dot 4 into the Enclave with a syringe?
@@ChanceChelios unfortunately, that’s something I swould have to get my hands on to know what’s going on. Sometimes you have to take the primary cover off and adjust the clutch on that side.
@@RAIDERWORLD I think im explaining it wrong, when I squeeze my clutch there is no much play, there is no tension at all, last time I did this I primed it up and it felt normal this time it seem to not want to prime up the line.
Hey are you still liking the wide front tire? Any cons?
I have 0 cons so far on the Fat front tire. Absolutely love it!