Joey and ABC did my dirty air ride....top notch vendor. I make it a point to stop by and see them at each event we go too. Great video....bars look great on your CVO
Great video. Great job. Great instructional vid for the Rushmores. Man the newer bikes are so easy to work on. I did the Fat Bagger bar change on my '08 Ultra, had to remove the ignition, and de-pin every wire from those big plugs. Took me 6 hrs.
Hey Bob and Tam , hope you enjoy the new bars i saw a video you did at daytona back in 2021 i think and you were showing him doing bars i really liked that style and had him put a set on my street glide at myrtle beach back in 2022 i really like them took all the pain from my neck and shoulder i would have never known about all about custom,s if it hadnt been for you thanks for all ya,ll do fot us that ride take care
Great video. Watching Joey install the bars so quickly was amazing. Most shops estimate five hours to install handlebars. It pays to be a true professional. Are you going to do a video on how your new bars have changed your riding experience?
My bars were prewired for the controls. I have to run the TBW and heated grips wires ... how would you go.about that with some wir9ng already ran. Is it a pain or should I pull them out and do them together... my bars are 14 inch meathooks
just curious how you like the fat bagger reduced reach handlebars ? i have a 2016 tri glide and have been looking at a lot of different handle bars. currently have harley's 10 in bars, and i feel like im having to stretch out a bit more and putting more stress on my wrists. thanks
Best install video I’ve seen. How tall are the stock bars? I thought the stock was 10”, but the 11” reduced reach looked taller than the difference of an inch.
@@bobandtams OK thanks for clearing that up. I have the same bike as you, and I was thinking about 12” bars. Now after watching your video I want to do the 11”. I’m 6’ tall, and the 11” bars look perfect.
Great video guys, I was think between 16" to 18" for my ultra limited cvo but watching this is making me think twice. I'm 5.8" how tall are you sir and how you finding the new bars now?
Hello and thanks for the video!! Do you have any pictures of the bike with the new bars mounted? Would like to see a bit more of how it looks :-) Best regards, Peder
hello to ya both, been while since commented on 1 of your vid's, but while looking at the fat baggers site and for reviews, how ya liking the bars and these are the reduce reach bars??
Hey mate, after having these bars for a few months are they much more comfortable than the standard bar. I’m looking for something similar 9:02 my 22 Ultra Limited . Looking for a bit higher but not above the fairing and a better wrist angle..That was a great install video👍🏻🇦🇺
Yes never had bars replaced before on any bike I owned, but It so great I can't say enough. I can now make U turns slower and tighter. I love them. Highly recommend checking out All Bout Customz. You can find on Facebook
you making this look was too easy Bro. I did mine and went to rode test bike started at full throttle when i twisted the throttle it would idle.was about to ride it like that to a shop but got on the phone to Fat Baggers and tech support said the 6 throttle wires were crossed. wish i would have watched this first.
Bob, you should have went with the 1.5" diam. 14 in bars with the meat hooks. I have these bars and they look great. Better than Factory 47 or any other brand. Bob went with 11 inch bars and Queen Sit has 16 inch bars on her RG. 😀😀😀😀
This guy is awesome. Love it when you find the right guy for the job.
He does great work
Nice job, that feller, knows his Business 👍😎
You got that right!
Joey and ABC did my dirty air ride....top notch vendor. I make it a point to stop by and see them at each event we go too. Great video....bars look great on your CVO
Thanks they do great work
This is the best handlebar install vid I have seen.
Thank you
Great video. Great job. Great instructional vid for the Rushmores.
Man the newer bikes are so easy to work on. I did the Fat Bagger bar change on my '08 Ultra, had to remove the ignition, and de-pin every wire from those big plugs. Took me 6 hrs.
Wow that was a job
Excellent instructions. He's done that once or twice before 😎
Yes he has
Excellent vid learning 😮
Glad you enjoyed it
Hey Bob and Tam , hope you enjoy the new bars i saw a video you did at daytona back in 2021 i think and you were showing him doing bars i really liked that style and had him put a set on my street glide at myrtle beach back in 2022 i really like them took all the pain from my neck and shoulder i would have never known about all about custom,s if it hadnt been for you thanks for all ya,ll do fot us that ride take care
I'm glad we could help you. When we find good products, we like to promote them
Thanks for watching
Congrats on the new bars👍👍
Thanks
Thanks alot for the video
My pleasure
Looking forward to this video. I need new bars for my 2014 ultra limited. At 5' 8" the stock bars just don't fit me comfortably.
Check out All Bout Kustoms
Nice Job watched it to end !!! Love them
Thanks
Great video. Watching Joey install the bars so quickly was amazing. Most shops estimate five hours to install handlebars. It pays to be a true professional. Are you going to do a video on how your new bars have changed your riding experience?
Thanks for that! will do
Like those Bars! Great video. Enjoyed it, from Southwest, Montana
Awesome! Thank you!
Super informative video! The new bars look great!!
They are!
My bars were prewired for the controls. I have to run the TBW and heated grips wires ... how would you go.about that with some wir9ng already ran. Is it a pain or should I pull them out and do them together... my bars are 14 inch meathooks
I would pull it all out and run it together. We Use air to blow the wires through
just curious how you like the fat bagger reduced reach handlebars ? i have a 2016 tri glide and have been looking at a lot of different handle bars. currently have harley's 10 in bars, and i feel like im having to stretch out a bit more and putting more stress on my wrists. thanks
I love them, the best thing I ever bought for my bike. Joey from All bout customz fits you properly
Looking good. Big time bagger!
Oh yeah!
Will you be at OC BikeFest in Ocean City MD in September?
yes
Amazing to watch a pro. Last time I did that to a chopper I spent weeks on and off over the winter.
Thanks 👍
Impressive, great vid
Thanks
This Dude is AWESOME VERY COOL 😎
does great work
Best install video I’ve seen. How tall are the stock bars? I thought the stock was 10”, but the 11” reduced reach looked taller than the difference of an inch.
8 inches is stock
@@bobandtams OK thanks for clearing that up. I have the same bike as you, and I was thinking about 12” bars. Now after watching your video I want to do the 11”. I’m 6’ tall, and the 11” bars look perfect.
@@mrnonpc9885 Ones I got are Fat Bagger
Great video guys, I was think between 16" to 18" for my ultra limited cvo but watching this is making me think twice.
I'm 5.8" how tall are you sir and how you finding the new bars now?
5' 11 I love the bars, I wish I would of got them.years ago
Hello and thanks for the video!! Do you have any pictures of the bike with the new bars mounted? Would like to see a bit more of how it looks :-) Best regards, Peder
I'll do one next week.
What other size reduce reach bars do you have for a streetglide special
only have 11 inch in reach
love the small on your face I had the same one
thanks
hello to ya both, been while since commented on 1 of your vid's, but while looking at the fat baggers site and for reviews, how ya liking the bars and these are the reduce reach bars??
Yes love them wished I would of bought them years ago.
Harley Davidson in Oxford Al quoted me 10 hours just for labor $1,400.00 (crazy)!!😂😂
yes it is
Outstanding 🙏👍👍👍🇺🇸🏖
Thank you kindly
If folks buy the bars from you, do you have deals of free installs? Sorry if this is a dumb question.
Yes, give them a call tell the we sent you
How are you liking these handlebars?
Love them wish I would of bought them sooner
@@bobandtams I'm going to contact them and maybe get some during the Sturgis Rally.
@@SFJ.Sparky Tell them we sent you
@@bobandtams ok !!!
Wonder how many he does in a day?
Not sure can do one in about a hour
@@bobandtams might have to make a trip to Sturgis next year. I hate the bars on my 04 ultra
@@murrayhelmer8941 you will not be sorry
Not my choice but look nice!
Thanks for watching
Hey mate, after having these bars for a few months are they much more comfortable than the standard bar. I’m looking for something similar 9:02 my 22 Ultra Limited . Looking for a bit higher but not above the fairing and a better wrist angle..That was a great install video👍🏻🇦🇺
Yes never had bars replaced before on any bike I owned, but It so great I can't say enough. I can now make U turns slower and tighter. I love them. Highly recommend checking out All Bout Customz. You can find on Facebook
Every shop I've went to says 6 to 8 hours to change bars.
Wait time? Ours only took an hour to install, and that was us filming and Joey explaining things
👍👍👍👍 great job 🙏🦠
Thanks for the visit
you making this look was too easy Bro. I did mine and went to rode test bike started at full throttle when i twisted the throttle it would idle.was about to ride it like that to a shop but got on the phone to Fat Baggers and tech support said the 6 throttle wires were crossed. wish i would have watched this first.
Sorry for your troubles.
Bob, you should have went with the 1.5" diam. 14 in bars with the meat hooks. I have these bars and they look great. Better than Factory 47 or any other brand.
Bob went with 11 inch bars and Queen Sit has 16 inch bars on her RG. 😀😀😀😀
That's why they make so many Bars to fit everyone's comforts