I'm glad you think so! As a heads up, this week we should be starting a new, shorter runtime series, called Spinning Room Floor where we take a quick look at some builds that didn't make it to final testing! Long testings are still here to say of course!
Thanks for the heads up! The more digestible videos should do great. I’m currently editing 5 Hasbro format testing videos and I used y’all as a template for filming/editing. So thanks!
nice, it feels to me like unite data is scarce for some reason. would love to see more unite testing. since it's basically a half mm lower taper, perhaps it would work better on upper attack specialists like shark edge? tyranno beat feels more like a destabilizer that works on higher heights.
Glad you guys are showing this build some love! You need to really change your launch based off what youre going against. In my tournament/testing, you have to have a very aggressive angle against WR but most defense types shut it down completely no matter how you launch. This is def going into my main line up in the future though
I just got that Knife Shinobi pack with the blue HN in the mail today! I can't wait to come back home to try out this Unicorn you guys have been liking. Been using your videos to get ideas for building "opponents" to test alone against. It's not as legit of a battle alone, however it's fun anyway. Understanding can still be gathered while I wait for the weekend. The remark about Unite and Taper being similar is about the same as saying 3-60 and 9-60 are similar to me. It valid don't get me wrong! Unite's main trait to me is giving heavyweights stamina without reducing their stopping power (unlike Rush). Unite eventually goes unorthodox but it also gives your attackers lots of chances to swing at high power. It does better free spinning that it does ride the x line, because it will attack after being hit freespinning unless the position rings it out! Taper/HT shines a lot on taller beys like Phoenix Wing with 3-70 or 3-80 ratchet because its specialty is maintaining launch patterns and angles until it flattens out for some last ditch swings. The self-ko issue with these high speed balance bits is because the bits quite literally taper off and create a ramp for itself while moving forward on the X line. I have high hopes for our upcoming left spinner, but I feel like the stock Bit is going to be criminally underwhelming worse than Gear Flat! Hoping for the best with good weight but this looks like a medium weight barrager... We'll make it work, this is only the first one 😎
My personal favourite combinations for U are: PW 9-60/5-60/1-60/3-70 U (1-60 does take away some of that control for that extra attack potential, so keep that in mind.) US 1-60/9-60/5-60 U (again, 1-60 takes away control for more attack so it can be a bit risky) TB 3-70/1-60 U (same goes for here) Edit: I don't have TB but I saw it could do some stuff by the testings I have seen in this video and others. My favourite out of all of these are the PW combo, it is good against AVA and does surprisingly REALLY well against WR, idk if I want to say that it is a complete counter to WR, but what I will say is that it is most certainly a good option if your going up against one. Overall very solid combos, although I will say the PW and US are a bit better then TB. I am going to do some more testings now to see the percentage against AVA stuff, defence stuff and WR so watch out for an edit below. Edit: PW 9-60 U: 60% against WR, R.I.P My stadium it took a big hunk out of (the part where the Xtreme pocket connects up to the KO pocket) I mean I have had this stadium since the start of X so it makes sense.
I definitely agree that Unite has a real self KO risk, but if you give it the right angle, and dont absolutely 150% max launch it, its a very powerful bit with some real potential
Wow. A. Disrespectful to just...ask like that. And B. Does it matter? No. If you're just curious, that's fine. But seriously, that is not the way to ask. Keep your comments to yourself next time.
Easily the best testing channel on RUclips. Keep up the great work guys!
I'm glad you think so! As a heads up, this week we should be starting a new, shorter runtime series, called Spinning Room Floor where we take a quick look at some builds that didn't make it to final testing! Long testings are still here to say of course!
Thanks for the heads up! The more digestible videos should do great. I’m currently editing 5 Hasbro format testing videos and I used y’all as a template for filming/editing. So thanks!
nice, it feels to me like unite data is scarce for some reason. would love to see more unite testing. since it's basically a half mm lower taper, perhaps it would work better on upper attack specialists like shark edge? tyranno beat feels more like a destabilizer that works on higher heights.
Glad you guys are showing this build some love! You need to really change your launch based off what youre going against. In my tournament/testing, you have to have a very aggressive angle against WR but most defense types shut it down completely no matter how you launch. This is def going into my main line up in the future though
I just got that Knife Shinobi pack with the blue HN in the mail today! I can't wait to come back home to try out this Unicorn you guys have been liking. Been using your videos to get ideas for building "opponents" to test alone against. It's not as legit of a battle alone, however it's fun anyway. Understanding can still be gathered while I wait for the weekend.
The remark about Unite and Taper being similar is about the same as saying 3-60 and 9-60 are similar to me. It valid don't get me wrong! Unite's main trait to me is giving heavyweights stamina without reducing their stopping power (unlike Rush). Unite eventually goes unorthodox but it also gives your attackers lots of chances to swing at high power. It does better free spinning that it does ride the x line, because it will attack after being hit freespinning unless the position rings it out!
Taper/HT shines a lot on taller beys like Phoenix Wing with 3-70 or 3-80 ratchet because its specialty is maintaining launch patterns and angles until it flattens out for some last ditch swings.
The self-ko issue with these high speed balance bits is because the bits quite literally taper off and create a ramp for itself while moving forward on the X line.
I have high hopes for our upcoming left spinner, but I feel like the stock Bit is going to be criminally underwhelming worse than Gear Flat! Hoping for the best with good weight but this looks like a medium weight barrager... We'll make it work, this is only the first one 😎
Glad to see you guys aiming like how I suggested! Nice level up!
My personal favourite combinations for U are:
PW 9-60/5-60/1-60/3-70 U (1-60 does take away some of that control for that extra attack potential, so keep that in mind.)
US 1-60/9-60/5-60 U (again, 1-60 takes away control for more attack so it can be a bit risky)
TB 3-70/1-60 U (same goes for here) Edit: I don't have TB but I saw it could do some stuff by the testings I have seen in this video and others.
My favourite out of all of these are the PW combo, it is good against AVA and does surprisingly REALLY well against WR, idk if I want to say that it is a complete counter to WR, but what I will say is that it is most certainly a good option if your going up against one. Overall very solid combos, although I will say the PW and US are a bit better then TB. I am going to do some more testings now to see the percentage against AVA stuff, defence stuff and WR so watch out for an edit below.
Edit:
PW 9-60 U: 60% against WR, R.I.P My stadium it took a big hunk out of (the part where the Xtreme pocket connects up to the KO pocket) I mean I have had this stadium since the start of X so it makes sense.
Thanks for your insight!
@@FabeldBeyblades np
YESSSS! U veryyyyy underrated!
Hey Fabel nice testing! Any plans on testing Tyranno on more offensive bit like rush?
Possibly! Though probably not until after CobaltDragoon/BlackShell testings
the thing with tyrano is that it get much better with tilt luch but it prone to over tilt and stop itself.
This might be TyrannoBeat's evo. TyrannoHit.
New profile picture? Like it!
Mmhm! It's a 3D printed Driger V2 I painted up with Gundam Markers
@@FabeldBeyblades Nice!
Love the video
I got a suggestion if you take those. I dont have a x stadium but in my burst stadium phoenix wing 3-60 or 9-60 disc ball is really great
Wdyt of running Rush or Cyclone instead of Unite in this combo?
Rush is very good on PW1-60, I haven't tested Cyclone on it enough, but it would most likely be pretty decent
My unite doesn't even have a point, it straight up just a taper. I was really disappointed lol 😞
Yea that's the common and intended mold. Even the one they have in the promotional video has no usable protrusion
Well, I stand corrected, it seems TT just started sending out replacement Unites that do indeed have a protrusion. Disappointing first run indeed.
@@FabeldBeyblades aaawwww man, that's what we get for pre ordering I guess haha
I don't like Unite, too risky
I definitely agree that Unite has a real self KO risk, but if you give it the right angle, and dont absolutely 150% max launch it, its a very powerful bit with some real potential
u is meh on TB 1-60 T or R is way better
How do you launch TB 1-60 T?
are you gays?
Wow. A. Disrespectful to just...ask like that. And B. Does it matter? No.
If you're just curious, that's fine. But seriously, that is not the way to ask. Keep your comments to yourself next time.