Man, this is EXACTLY what I was looking for! I have the exact same sprinkler setup that I installed by myself a few years ago. It’s been leaking for over a month so I had to shut it off. I was dreading having to dig another hole and replace everything. This will be my weekend project! Thanks!!!
Great video, Gary. I followed your procedure three times with a no luck. I decided to go one step further and replace the solenoid valve since I had purchased it with the new valve. Problem solved! I guessing the solenoid had sand inside which did not allow it to seal. Hope this helps another rookie!
This was so amazing.... You saved my day!!! I was dreading the valve replacement for weeks... finally one last one broke and I had to deal with it. If I knew this was so easy, I would have done it weeks ago. YOU ARE MY HERO!!!! THANK YOU THANK YOU THANK YOU!!!!
Mine, glad you overcame your fear and found that you’re fully capable of handling this project on your own. Don’t forget to Subscribe to our Channel it really helps us grow ✌️
Thank you for taking the time to do this. I am a GC but seldom work on sprinklers. Today I am going on a service call for a leaking sprinkler valve and this really helped.
Thank you for being a great person and showing people how to do this! Most people nowadays are so greedy. You saved me so much money and I’m grateful!! 🙏🏼💖
Glad you found the video useful. Feel feel to bookmark our Channel by Subscribing and tapping the bell to be notified when we answer any of your questions or post new content.✌️
Thank you very much for posting this video. I have the same system at home. Followed your steps to disassemble the valve, checked and cleaned gaskets and a filter and problem was solved! You saved me money by not calling gc. Thank you!
Ruben Haro you’re welcome, easy as 1,2,3 right? Glad it helped you out. If you get a chance be sure to Subscribe and tap notifications to help the channel grow. Also we do monthly Giveaways
Great video - I need to replace 4 Lawn Genie valves - am going to use this same method - not having to cut, glue and risk a leak is a huge PLUS ! Thanks so much for posting this.
Stunt Driver, glad I could help you out. If you get a chance feel free to Subscribe to my Channel as I have 40 other sprinkler videos. Also, let me know if you have any questions along the way.😎
Thanks, Gary. I used your tip a year ago and watched this again today because I have another fix to do now. This is oh so much easier than re-doing the manifold.
@@garyssprinklerrepair Had to replace another one today. Watched again to make sure I did it right. Hey, I'm an old guy with CRS (Can't Remember Sh_t).
Saving people helping people save money was the reason I started my Channel. Hope you took a minute to Subscribe to our channel so you don’t miss out when new contents added.✌️
This video was so insightful. I couldn't not find any resource information on the Rainbird site. Thank you for making this video! Based on the views and comments, it has helped a LOT of people.
Always awesome to hear a feel good story. Glad everything worked out for you. Hope you took a minute to Subscribe to our Channel for more help in the future.👍
Sean Giloni you’re more than welcome, check out our Channel too we have over 30 Sprinkler how to videos. Be sure to Subscribe and tap notifications so we can communicate if you have questions.
Man, what I would give to have my valves standing up in the air like this and not in an arm pit deep, black widow infested mud hole! That said, I really appreciate your videos! I forgot if the spring went up or down, and you answered that!
splibb you could always cut them and 90 the pipes up. Subscribe if you get a chance and tap notifications it really helps the Channel with placement. PS you’re comment was hella funny, same thing I think when someone wants me to work on one.
By the way, the warning about the shut off valve not working was like a psychic prediction.... The ball valve did not work at all and when I checked it like you said to the water was still on. I simply turned the water to the house off and I was good to go, and I did not take a shower and turn my work area into a mud pit. Great video man, pro tips from start to finish.
Great video! Thanks for sharing this tip. I made sure to replace all my valves with these rain bird brand valves so that it makes repairs nice and simple in the future.
BIGMIG glad to help out be sure to Subscribe and tap notifications as we will be having a Giveaway at the end of July and add new videos all the time. Plus you have access to me for Sprinkler questions notifications will let you know I’ve responded.
Martin Bobek hi , saw your comment today was wondering what you meant. (Garys’ Sprinkler Repair Itrigtrol) on BIGMIG comment? Were you saying you prefer Irritrol valves? They used to be my favorite until they started not holding up to the test of time.
joseph Norcal USA #1 glad I could help out my friend. We have lots of other sprinkler videos so make sure. to Subscribe and tap notifications bell to be notified when I upload as well as answer any questions you might have. ✌️
Glad I found this...I was thinking the same way - just replace the top parts of the valve rather than cutting pipe and having to glue things together again. I didn't even think about reusing the solenoid! Great tips...I know what I am doing this weekend.
Thanks Daniel, good luck on your repair. Don’t forget to turn the water off 1st. 😁 Hope you took a Minute to Subscribe to our Channel, it really helps the channel grow on YT
@@garyssprinklerrepair So here is one wrinkle...Rain Bird hasn't made the valves I have since 2008 (APAS 075). You can't find them very easily...found one on eBay for $45! I grabbed it quick!
I got a leaky breaker lid and this video just soothed my worst fears! I don't have to take the whole valve off!! I have also heard that what you term a "breaker lid" may also be called a "plunger cap" or just "valve cap", any-whooo...Thanks for the vid very helpful!!
Thank you so much! I have the exact valve which just won't stop hissing at us. The valve is leaking. So I was deciding whether to replace the parts here and there, but I decided to do the exact thing you've taught me. Thank you...
Great news , glad everything worked out. Just a heads up if the screws come loose again your water pressure might be too high. We have more info on our RUclips Channel. Subscribe for more content. Thank for the awesome comment btw.👍
Fair price, for a contractor if he's replacing the entire valve. He wouldn't be able to warranty just swapping the tops. Glad I was able to help you save some $$. Hope you get a chance to Subscribe for more help in the future.
Because I give 2 yr. warranty on my valves I choose to replace the entire valve. This is however a really inexpensive, quick fix with no glue and simple household tools. Glad you liked it.🤙
Debora R , glad I could help out. Be sure to Subscribe for free to our channel and tap notifications to be able to ask me questions, be entered into our monthly drawing and to see new videos. Gary
Too obvious...heheh. So obvious that I never would have thought of it, myself. Thanks, man. You saved me hours of frustration. It worked for an old Lawn Genie valve. Fortunately, they don't seem to have changed the design in a couple decades and replacement was straightforward.
@@garyssprinklerrepair @tppbila2155 0 seconds ago @garyssprinklerrepair Yup...liked and subscribed. I want back all the months of life I've wasted over the last twenty-four years keeping alive the kludged sprinkler system the previous owner put in this place. The stories I could tell...
Thank you so much for this video. We have rainbird valves too (I didn't even know the name of them prior to this) and this video just saved us a huge headache. My Wife's Uncle is a pro landscaper and has been helping us with fixing up our sprinkler system during the weekends. We recently split a couple of the zones which didn't have high enough pressure (too many sprinklers per zone). I guess that one of the very old valves we have is having trouble handling the increased pressure now and got stuck in an on state (couldn't get it to turn off from the control box). I shut off the water but I couldn't get access to the shut-off valve for just that set of sprinklers (I think it's pretty well buried) so I ended up shutting off the water to the house to get it to stop so we had no water at all. After watching this video I took it apart as you showed. I took a few small rocks out of it and made sure the part that moves on the inside of the screw-on cap was not getting stuck, then put it back together and then it finally shut itself off after it ran for a few seconds when I turned the water back on. I'm leaving the system shut off until the weekend when her Uncle will be back to continue working on this. We'll likely just end up replacing those parts on that one as I don't trust it at this point. Thanks again!
It’s normal for the valve to turn on again when the water is turned back on after a repair, once it reaches 15 psi it then shuts down. Glad to help, don’t forget to Subscribe to our Channel it really helps us too.✌️
Wonderful video! Very helpful, thorough, and useful. You helped two senior citizens (female at that) replace and troubleshoot a valve and save the hassle of explaining the symptoms to an English-speaking-challenged gardener and have to pay for a full valve replacement that wasn't necessary. Just out of curiosity, though, the bleed screw from the old valve blew out and we couldn't thread it back. (...which is why we replaced the top parts of the valve.) It did not appear to be stripped, nor did the threads of where it went. However, it already had teflon plumber's tape on it, which makes us think it had come out before and someone put it back. Two questions: 1. Would a new part from the factory have teflon tape on it already? 2. If a bleeder screw shoots out, can it be put back? It doesn't matter now since we replaced the top parts of the valve as explained in your brilliant video, but we are curious. The new valve's instructions make it a point to emphasize only to turn a bleeder screw one turn, suggesting it shouldn't be turned more or it might come out and not go back. Thanks so much for your video and help.
Hi there I hope I could answer your questions. 1. It does not come with Teflon tape from factory. The reason why they put Teflon tape is at one point the plastic threads were not holding it in place. 2. In my experience these are $25 plastic valves. Absolutely nothing wrong with plastic in fact I like them better than the metal one's.. especially for residential use. But that small knob in particular is very sensitive.... Hope that helps..
Sorry I never saw your comment, sometimes RUclips screens my comments. As Francisco mentioned the valves don’t come with Teflon tape, they’re easy to cross thread if unscrewed to far. Swapping the valves top definitely fixed the issue.✌️ thx Francisco
Joel Burrow be sure to Subscribe and tap notifications to be notified of the July Giveaway and to be able to ask me questions any time of day with responses same day.
I'm trying to figure out the best way to replace this valve...I have the two connections, one is a PVC pipe and the other is just the irrigation type hose that the sprinkler system uses (not PVC). I am having a hell of a time finding an adapter to fit this other line. What do you suggest ? Thanks
been doing the same thing for the large brass valves and they sell the replacement valve without the body...for $75 each...LOL I always change out the solenoid and or diaphram while I'm doing this. No sense in using old parts in your new valve. Also, on these sprinkler systems it doesn't make any difference which way you reattach the wires for the valve, they work either way. This is a great video as it shows the basics of simply replacing parts
Yes, some like the plastic valves too. We don’t see many brass valves anymore here in Cali. To each their own, either way sometimes swapping the tops saves the customer some money and the contractor time. ✌️
Хобби
Thank you Gary, this was a very nice video that made a complicated and expensive home repair job simple. Very useful.
Man, this is EXACTLY what I was looking for! I have the exact same sprinkler setup that I installed by myself a few years ago. It’s been leaking for over a month so I had to shut it off. I was dreading having to dig another hole and replace everything. This will be my weekend project! Thanks!!!
Glad to hear it, enjoy your weekend. Glad it helped you, don’t forget to Subscribe to our Channel it helps us grow.
Great video, Gary. I followed your procedure three times with a no luck. I decided to go one step further and replace the solenoid valve since I had purchased it with the new valve. Problem solved! I guessing the solenoid had sand inside which did not allow it to seal. Hope this helps another rookie!
OMG, this is so inspiring! I should definitely reconfigure my tenant's sprinkler valve system with this master switch too
Good luck to ya, make sure to Subscribe to my channel in case you have a question or 2.👍
This was so amazing.... You saved my day!!! I was dreading the valve replacement for weeks... finally one last one broke and I had to deal with it. If I knew this was so easy, I would have done it weeks ago. YOU ARE MY HERO!!!! THANK YOU THANK YOU THANK YOU!!!!
Mine, glad you overcame your fear and found that you’re fully capable of handling this project on your own. Don’t forget to Subscribe to our Channel it really helps us grow ✌️
Thank you for taking the time to do this. I am a GC but seldom work on sprinklers. Today I am going on a service call for a leaking sprinkler valve and this really helped.
Flying V thanks, hope this did actually help. If ya get a chance to subscribe it would help me out too. I have 23 other videos. Gary
This is golden! Thank you, Sir! Now I can easily fix my leaky valve without cutting the pipes!
MrNewgard you’re more than welcome. If you liked the video be sure to Subscribe to our Channel it’s free and we have many other helpful videos. ✌️
Thank you for being a great person and showing people how to do this! Most people nowadays are so greedy. You saved me so much money and I’m grateful!! 🙏🏼💖
Jenny, thank you glad to be able to help you out. Hope you got a chance to Subscribe to our Channel it helps us with standing on RUclips✌️
Fantastic video Gary, you just saved me a ton of extra work trying to replace the whole valve. Thank you!!
Glad you found the video useful. Feel feel to bookmark our Channel by Subscribing and tapping the bell to be notified when we answer any of your questions or post new content.✌️
Happy it was useful for ya, hope you didn’t forget to Subscribe to our Channel for more video tips.✌️
Thank you very much for posting this video. I have the same system at home. Followed your steps to disassemble the valve, checked and cleaned gaskets and a filter and problem was solved! You saved me money by not calling gc. Thank you!
Ruben Haro you’re welcome, easy as 1,2,3 right? Glad it helped you out. If you get a chance be sure to Subscribe and tap notifications to help the channel grow. Also we do monthly Giveaways
Great video - I need to replace 4 Lawn Genie valves - am going to use this same method - not having to cut, glue and risk a leak is a huge PLUS ! Thanks so much for posting this.
Stunt Driver, glad I could help you out. If you get a chance feel free to Subscribe to my Channel as I have 40 other sprinkler videos. Also, let me know if you have any questions along the way.😎
Thanks, all of your videos are extremely helpful, keep them coming.
Thank you. I was able to fix my sprinkler valve on my own thanks to your video.
Thanks, Gary. I used your tip a year ago and watched this again today because I have another fix to do now. This is oh so much easier than re-doing the manifold.
I agree, glad you’re still subscribed to our channel so you know where to get your info. 👍
@@garyssprinklerrepair Bought and installed the valve today from Ace. It was $30! Easy peasy!
@@garyssprinklerrepair Had to replace another one today. Watched again to make sure I did it right. Hey, I'm an old guy with CRS (Can't Remember Sh_t).
Thank you Gary! I thought I was going to have to replace the whole valve! This is so much easier
Hope it worked out for you my friend, glad to be of help. Don’t forget to Subscribe to our Channel if you get a chance.😉
Great video! You saved me hundreds. I never thought to just replace the top part and leave the plumbed parts intact. Thanks again!
Saving people helping people save money was the reason I started my Channel. Hope you took a minute to Subscribe to our channel so you don’t miss out when new contents added.✌️
This video was so insightful. I couldn't not find any resource information on the Rainbird site. Thank you for making this video! Based on the views and comments, it has helped a LOT of people.
Wow, thank you for the amazing comment. Really glad it helped you out. Hope you remembered to Subscribe to our Channel for future assistance. 👍
Basically ,replacing the guts of the valve and the solenoid. Smart and fast. Done it the same way every time.Great video!
Thx for the great comment Loan. Glad you are keeping it simple. Hope you had a chance to Subscribe to my Channel during your stay here✌️
Thank you! Very helpful. I was going to replace the entire valve. You just saved me alot of extra work.
You’re welcome, hope you took a minute to Subscribe to our Channel. It helps us on RUclips.✌️
I just bought some replacement parts at Lowe’s. Followed this video. Thank you for the tutorial!!
Great news for everyone, glad you found the video helpful my friend. ✌️
Awesome tip, Gary! This was a lifesaver. Thanks!
Glad you found it helpful
Thank you Gary! Your instructions was very helpful. Made my work and pocket easier!
Always happy to help out, don’t forget to Subscribe to our Channel we have a lot of other content you might like.✌️
Thanks, Gary. Your video inspired me and fixed my old head aching valve. Very helpful video. Cheers!
Always awesome to hear a feel good story. Glad everything worked out for you. Hope you took a minute to Subscribe to our Channel for more help in the future.👍
Very good video Gary. Thank you from Texas.
More than welcome, hope you took a minute to Subscribe to our Channel it really helps us too.✌️
Gary, thank you so much for the video. It made my job really easy. Appreciate it so much, buddy.
Sean Giloni you’re more than welcome, check out our Channel too we have over 30 Sprinkler how to videos. Be sure to Subscribe and tap notifications so we can communicate if you have questions.
Awesome information. Thanks so much. Saved me time and money. Much appreciated.
So glad to help you out. Be sure to Subscribe when you get a chance and tap that notifications bell to be notified when I upload new videos.✌️
Man, what I would give to have my valves standing up in the air like this and not in an arm pit deep, black widow infested mud hole!
That said, I really appreciate your videos! I forgot if the spring went up or down, and you answered that!
splibb you could always cut them and 90 the pipes up. Subscribe if you get a chance and tap notifications it really helps the Channel with placement. PS you’re comment was hella funny, same thing I think when someone wants me to work on one.
Gary's Sprinkler Repair
Done and done my friend!
Thank You. Best video ever. Spot on perfect information and after watching the video I fixed the leak in 5 minutes with only a screwdriver. THANK YOU!
By the way, the warning about the shut off valve not working was like a psychic prediction.... The ball valve did not work at all and when I checked it like you said to the water was still on. I simply turned the water to the house off and I was good to go, and I did not take a shower and turn my work area into a mud pit. Great video man, pro tips from start to finish.
Huge thank you, hope you took a minute to Subscribe to our Channel.👊
Worked like a charm. Thank you for this video!!!
Hey anytime my friend that’s what I’m here for. Hope you Subscribe to our Channel when you get a moment.😉
This was very helpful. Thank you!
Steve Moglia thanks Steve, I’ll be adding a new video tomorrow of the wireless app controlledRainbird timer so be sure to Subscribe my friend
You da man Gary! Wish I saw your video a month ago, would have saved me some time! Have a blessed one Amigo!
Thx for the great comment. Glad you finally found us though. So, don’t forget to Subscribe.😎
Great video. You saved me time and money. Thank you!
You’re certainly welcome, thank you. Glad to hear good news. Hope you’ll consider Subscribing to help our Channel 😁
Excellent video. Thanks for helping me.
Glad you were able to find it helpful, hope you remembered to take a minute to Subscribe to our Channel we have a lot more content there.✌️
Gary, thank you for this great video, it was very helpful and mad my life easy🙌🙏
Glad to help you out. We add more content all the time. So, don’t forget to Subscribe to our Channel it’s really helpful to us as well. ✌️
Great tips Gary thank you for sharing
Thank you Darrell, be sure to Subscribe to our Channel. We have quite a lot of content there you might find useful too.✌️
Great video! Thanks for sharing this tip. I made sure to replace all my valves with these rain bird brand valves so that it makes repairs nice and simple in the future.
BIGMIG glad to help out be sure to Subscribe and tap notifications as we will be having a Giveaway at the end of July and add new videos all the time. Plus you have access to me for Sprinkler questions notifications will let you know I’ve responded.
Gary's Sprinkler Repair itrigtrol
Martin Bobek hi , saw your comment today was wondering what you meant. (Garys’ Sprinkler Repair Itrigtrol) on BIGMIG comment?
Were you saying you prefer Irritrol valves? They used to be my favorite until they started not holding up to the test of time.
Awesome video and thanks for the clear instructions
Thank you for the supportive comment, it’s really appreciated. Hope you took a minute to Subscribe to my channel for more future videos. 👍
Helpful information, thank you so much for sharing 👍
joseph Norcal USA #1 glad I could help out my friend. We have lots of other sprinkler videos so make sure. to Subscribe and tap notifications bell to be notified when I upload as well as answer any questions you might have. ✌️
Glad I found this...I was thinking the same way - just replace the top parts of the valve rather than cutting pipe and having to glue things together again. I didn't even think about reusing the solenoid! Great tips...I know what I am doing this weekend.
Thanks Daniel, good luck on your repair. Don’t forget to turn the water off 1st. 😁
Hope you took a
Minute to Subscribe to our Channel, it really helps the channel grow on YT
@@garyssprinklerrepair So here is one wrinkle...Rain Bird hasn't made the valves I have since 2008 (APAS 075). You can't find them very easily...found one on eBay for $45! I grabbed it quick!
I got a leaky breaker lid and this video just soothed my worst fears! I don't have to take the whole valve off!! I have also heard that what you term a "breaker lid" may also be called a "plunger cap" or just "valve cap", any-whooo...Thanks for the vid very helpful!!
Well done Gary!
Thank you, glad you found it useful. Hope you remembered to Subscribe to our Channel for more videos.
You saved me a lot of headaches. Thank you ;)
Glad to be of assistance, hope you enjoyed it enough to Subscribe to our channel.✌️
Thanks so much for sharing your videos!
Thank you for the super nice comment. Hope you remembered to Subscribe to our Channel it sure does help us grow with YT
Amazing! Thank you so much. This is brilliant!
What a great video. Guys like this make RUclips legendary!
Really appreciated the awesome support.✌️
your so talented sir Gary enjoy what you do here to support sir
That was very helpful. Thank you..lots of good info there!!
Really appreciate your kind words, hope you get a chance to Subscribe to my channel for future videos.
Thank you, this video was very helpful.
Chris, I’m always glad to be of some help. Don’t forget to Subscribe to our Channel it really helps us on RUclips
Hi Gary. I'm going to do another valve replacement today. Yeah, I watched your vid again too. Many thanks!
Great to hear, you’ll be a pro in no time.👍
Excellent. Exactly what I was looking for! 👍
Jaime, always good to hear positive comments. Hope you’re able to help our Channel by Subscribing tonight🤙
Excellent video! Thank you!
You’re very welcome, If you get a minute be sure to Subscribe to our Channel. We have a lot of other DIY videos.
Love your videos
You're my hero! Thank you so much!
You’re very welcome, thanks for positivity. Hope you Subscribed to get more DIY help.👍
Great simple vid and helps a beginner to this easily.
Glad you found it helpful, hope you remembered to Subscribe to our Channel 👍
thank you sir gary this was a cool video very helpful information
Thanks!! Saved me a lot of time and headache!!
More than welcome Cliff, feel free to Subscribing to our Channel for more free tips.
Thank you so much! I have the exact valve which just won't stop hissing at us. The valve is leaking. So I was deciding whether to replace the parts here and there, but I decided to do the exact thing you've taught me. Thank you...
Glad to be of assistance, hope you took a minute to Subscribe to our Channel. It really helps our Channel grow.👏
Gary - great job - thank you sooooo much!
You’re very welcome Oscar, don’t forget to Subscribe to our Channel it keeps us going.
Thank you so much! Great video!
Always good to hear that the video has helped. Hope you took a minute to Subscribe to our Channel, there’s a lot more content there as well.
Great job neighbor....
Worked like a charm, thanks!
Thanks Roger, glad to be of some help. Feel free to Subscribe to our Channel, to bookmark it for later projects or questions ✌️
Thanks Gary!
Hi Sir Gary what an amazing video . Stay safe
Thanks, hope you decided to stay for awhile. Where’s your channel from?
Perfect! Just what I needed. The valve was loose when I replaced it.
Great news , glad everything worked out. Just a heads up if the screws come loose again your water pressure might be too high. We have more info on our RUclips Channel. Subscribe for more content. Thank for the awesome comment btw.👍
Cool!! Thanks buddy for sharing this job. Awesome
Awesome man! Thanks so much. Needed this today.
Never thought when I started this, others would actually use it.. thank you👊Don’t forget to Subscribe to our Channel it really helps us too.✌️
Thank you so much..learning a lot
That’s what I’m here for my friend, always glad to help out. Don’t forget to Subscribe if you get a minute.
Thanks for sharing this with us
You’re more than welcome glad you stopped by. Hope you get a chance to Subscribe to our channel.
Great video thanks for making this it was very useful!
You’re welcome, thanks for for the nice comment
Good info. Thank you.
Saved me a lot of time & money .. my stupid sprinklers always giving me problems , diaphragm is always bad & sprinkler won’t turn off ..
Glad you found it useful, ya when it gets hot they seem to go out just like house AC. 😁Hope you remembered to Subscribe to our Channel.
Pretty good. Nice option to have in a pinch. Thx 4 posting.
Thank you
Thanks for the video My man 🤝👍🏾because someone tried to tell me I need to cut them n glue he wanted 100$🤦♂️lol thanks again
Fair price, for a contractor if he's replacing the entire valve. He wouldn't be able to warranty just swapping the tops. Glad I was able to help you save some $$. Hope you get a chance to Subscribe for more help in the future.
Wish I would have thought of this years ago lol.. I’m DIYr and unfortunately never thought of that. Awesome
Because I give 2 yr. warranty on my valves I choose to replace the entire valve. This is however a really inexpensive, quick fix with no glue and simple household tools. Glad you liked it.🤙
Oh my gosh very inspiring content thank you for sharing this sir I really Appreciated new friend from #Commander vlogs
Thank you. This saved me some serious $$
Debora R , glad I could help out. Be sure to Subscribe for free to our channel and tap notifications to be able to ask me questions, be entered into our monthly drawing and to see new videos.
Gary
Worked great. Just unscrewed solenoid and replaced both tops.
Glad it helped you, hope you didn’t forget to Subscribe to our Channel it really helps us grow.👍
so helpful. with any luck this will fix our pressure after fixing the hole
Thanks for your nice comment, I too hope it helps you out. Hope you took a minute to Subscribe to our Channel to save us, for your next job.
Gary thanks for sharing
Love the name True American, glad you found our Channel useful. Hope you have a minute to Subscribe for free obviously, to help us out as well.✌️
Thank you for a simple step-by-step walkthrough. Saved me so much headache.
You’re welcome LocoHuero A.G., glad you found our video useful. Be sure to Subscribe to our Channel to save for future projects.✌️
Too obvious...heheh. So obvious that I never would have thought of it, myself. Thanks, man. You saved me hours of frustration. It worked for an old Lawn Genie valve. Fortunately, they don't seem to have changed the design in a couple decades and replacement was straightforward.
Always glad to help save the day. Hope you remembered to Subscribe to my channel it helps us in RUclips standings.👍
@@garyssprinklerrepair @tppbila2155
0 seconds ago
@garyssprinklerrepair Yup...liked and subscribed. I want back all the months of life I've wasted over the last twenty-four years keeping alive the kludged sprinkler system the previous owner put in this place. The stories I could tell...
Fantastic video.
Hi Debbi, thx for your kind words. Don’t forget to Subscribe to our Channel if you get a moment😉
this is what i need, very useful👍
Thank you Albert don’t forget to Subscribe to our Channel. We add new content from time to time.
This saved me $225 for a service call and a ton of time and frustration!! $31 for 2 valves from landscape supply and my system was back in business!!
Glad to be of assistance Diane, hope you didn’t forget to Subscribe to our Channel. It really helps us on RUclips ✌️
Thank you so much for this video. We have rainbird valves too (I didn't even know the name of them prior to this) and this video just saved us a huge headache. My Wife's Uncle is a pro landscaper and has been helping us with fixing up our sprinkler system during the weekends. We recently split a couple of the zones which didn't have high enough pressure (too many sprinklers per zone). I guess that one of the very old valves we have is having trouble handling the increased pressure now and got stuck in an on state (couldn't get it to turn off from the control box). I shut off the water but I couldn't get access to the shut-off valve for just that set of sprinklers (I think it's pretty well buried) so I ended up shutting off the water to the house to get it to stop so we had no water at all. After watching this video I took it apart as you showed. I took a few small rocks out of it and made sure the part that moves on the inside of the screw-on cap was not getting stuck, then put it back together and then it finally shut itself off after it ran for a few seconds when I turned the water back on. I'm leaving the system shut off until the weekend when her Uncle will be back to continue working on this. We'll likely just end up replacing those parts on that one as I don't trust it at this point. Thanks again!
It’s normal for the valve to turn on again when the water is turned back on after a repair, once it reaches 15 psi it then shuts down. Glad to help, don’t forget to Subscribe to our Channel it really helps us too.✌️
How do I know which one to check?
Thanks for sharing !
You’re more than welcome don’t forget to Subscribe for more new videos
I mean just directly do manually the valves? Thank you and God bless you.
Wonderful video! Very helpful, thorough, and useful. You helped two senior citizens (female at that) replace and troubleshoot a valve and save the hassle of explaining the symptoms to an English-speaking-challenged gardener and have to pay for a full valve replacement that wasn't necessary. Just out of curiosity, though, the bleed screw from the old valve blew out and we couldn't thread it back. (...which is why we replaced the top parts of the valve.) It did not appear to be stripped, nor did the threads of where it went. However, it already had teflon plumber's tape on it, which makes us think it had come out before and someone put it back. Two questions: 1. Would a new part from the factory have teflon tape on it already? 2. If a bleeder screw shoots out, can it be put back? It doesn't matter now since we replaced the top parts of the valve as explained in your brilliant video, but we are curious. The new valve's instructions make it a point to emphasize only to turn a bleeder screw one turn, suggesting it shouldn't be turned more or it might come out and not go back. Thanks so much for your video and help.
Hi there I hope I could answer your questions.
1. It does not come with Teflon tape from factory.
The reason why they put Teflon tape is at one point the plastic threads were not holding it in place.
2. In my experience these are $25 plastic valves. Absolutely nothing wrong with plastic in fact I like them better than the metal one's.. especially for residential use.
But that small knob in particular is very
sensitive....
Hope that helps..
@@eiknarfzepol Thank you for your reply. What you said is nice to know.
Sorry I never saw your comment, sometimes RUclips screens my comments. As Francisco mentioned the valves don’t come with Teflon tape, they’re easy to cross thread if unscrewed to far. Swapping the valves top definitely fixed the issue.✌️ thx Francisco
@@garyssprinklerrepair No worries. Your video was very helpful! Thanks again!
What's a bleeder screw? I too am a woman with no experience.
Solenoids go bad often, it's better to change it out with the new one, its only 2 wires to cut and reconnect! Great video, thx.
I agree, but you would be shocked how many people tell me they don’t mind doing plumbing but anything electrical…no way.
Nice and concise
Always appreciate the good press, glad I could help out. Hope you take a minute to Subscribe to our Channel.✌️
Thanks Gary
Joel Burrow be sure to Subscribe and tap notifications to be notified of the July Giveaway and to be able to ask me questions any time of day with responses same day.
Yup 👍 thank you
Great video!!
Thank you for the positive feedback my friend be sure to Subscribe to get all out new video notifications ✌️
Thank You
Great video thx
Great video
Appreciate the feedback, we have lots more content on our channel. Hope you remembered to Subscribe.✌️
Very good, thank you, I'll try this first and if doesn't work, I'll swap the whole thing out
Ya, it’s always worth a try worst case scenario full replacement. Hope you get lucky with it. 🍀
Excellent
Thanks John, glad you found it helpful. Hope you remembered to Subscribe to our Channel it really helps us grow.
Gary…. You tha man!!!
Thank you Barlos, glad you enjoyed the video. Hope you took a minute to Subscribe to our Channel it really helps us with YT.✌️
@@garyssprinklerrepair follower! 💪👊👊
I'm trying to figure out the best way to replace this valve...I have the two connections, one is a PVC pipe and the other is just the irrigation type hose that the sprinkler system uses (not PVC). I am having a hell of a time finding an adapter to fit this other line. What do you suggest ? Thanks
been doing the same thing for the large brass valves and they sell the replacement valve without the body...for $75 each...LOL I always change out the solenoid and or diaphram while I'm doing this. No sense in using old parts in your new valve. Also, on these sprinkler systems it doesn't make any difference which way you reattach the wires for the valve, they work either way. This is a great video as it shows the basics of simply replacing parts
I like plastic Hunter easy simple and cheap..
Not to mention they do the same job as the bronce..
Yes, some like the plastic valves too. We don’t see many brass valves anymore here in Cali. To each their own, either way sometimes swapping the tops saves the customer some money and the contractor time. ✌️