Troubleshooting an Irrigation Valve That Won't Turn On

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 14

  • @mikecandler4350
    @mikecandler4350 10 дней назад

    Saved me a ton of money not having to call a service pro. I was just about to give up and this video saved the day. Thank You! Turned out to be a smooshed solenoid washer that caused my issue which was found during the solenoid port check.

    • @Hunter_Landscape_Irrigation
      @Hunter_Landscape_Irrigation  3 дня назад

      We're here to help! If you run into trouble again, reach out to us here: www.hunterindustries.com/hunter-technical-support-email-request

  • @maryloulou370
    @maryloulou370 9 месяцев назад +3

    Outstanding video! Thank you for taking the time, much appreciated!

  • @2dogstwodogs458
    @2dogstwodogs458 4 месяца назад

    Wow! very good advice it cover pretty much everything. Thank you for taking the time to explaining it ....plus the images are great!.

  • @sandia4775
    @sandia4775 7 месяцев назад

    Love the video and problem solving! Now if there was a video for leaking/seeping valves basically valves that won’t turn off that would be ideal

  • @Jerrboyy
    @Jerrboyy 6 месяцев назад +1

    I can hear our valve has water flowing through it but does not leak water when solenoid is loosened nearly 5 turns, and the manual bleed screw does not turn on heads or leak water. Flow control is fully loosened too, solenoid was tested and works. I think there might be a clog in the valve but i took it apart and the whole thing was clean as a whistle. Im thoroughly confused now

    • @Hunter_Landscape_Irrigation
      @Hunter_Landscape_Irrigation  6 месяцев назад

      There may be a restriction after the irrigation valve. It may be time to meet with your local irrigation professional for field help.

    • @Jerrboyy
      @Jerrboyy 6 месяцев назад

      @@Hunter_Landscape_Irrigation thank you, we replaced the valve and it works fine now.

  • @casims2000
    @casims2000 3 месяца назад

    My system stopped turning on at its scheduled time. I changed out the entire top of the valve, but it still won’t turn on at the scheduled time. I can hear the click at the valve at its scheduled time of 7AM for it to turn on, but it doesn’t come on. I can manually turn it on at the controller box which doesn’t make sense to me. I can’t figure it out. Any suggestions?

    • @Hunter_Landscape_Irrigation
      @Hunter_Landscape_Irrigation  3 месяца назад

      This sounds like a good reason to contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request

  • @darkvoiceinthedesert
    @darkvoiceinthedesert Год назад

    Fixed my issue, thank you