My Sprinkler System Won't Turn On
HTML-код
- Опубликовано: 3 авг 2020
- Rodney shows you a simple solution to get your sprinkler system working if you get an "MV" or "P" error on your sprinkler control box.
haynessprinkleranddrainage.com/
972-838-4444
Irrigators License
TXLI0005972 - Хобби
So you just saved me a LOT of time and money - I have been researching for 6 months and I just happened upon your video (assuming you're in Texas too) and thanks to THIS video of the hundred I've watched, you fixed my issue. We bought the house 2nd hand and I'm pretty sure the first owners never used the system, as the master valve was completely covered with.. THANK YOU!
I am your typical clueless homeowner as far as sprinklers systems and after weeks of looking at vids yours is by far the best. THANK YOU
Thank you so much. My grass was about to die. This will probably save it until I find someone to replace the main valve.
Thank you so much for helping me with my sprinkler system. I know this is a temporary solution but it’s exactly what I needed. Great explanation too. I’m a clueless homeowner and it was extremely helpful. Thank you.
Your video was much appreciated for pointing me in the right direction! Everything at my Rainbird control box appeared normal (no errors), water was on, backlow preventer was disassembled & inspected but water still wouldn't flow. I used your tip to turn the zone valve bypass knob a quarter turn and water flowed so I figured "bad solenoid." However, none of the other zones worked either. Figuring there was a common cause, I opened up the control box to check wiring and - aside from a dead gecko and wasp nests - I found that the four-station module plugged into Bay 1 had somehow worked itself loose over 13 years. Replugging & flipping its bale to 'lock' fixed everything.
Everything you show me is fantastic, I have one question , what if you disconnect the white wire ? What it will happen, can to put it back together again without having any problem? I did disconnect the white wire . 😢😢😢😢😢😢😢😢😢
Please advice and what should I do . Thank you so much
What if you got no water flow at all to the valve. Even with the top pulled off and diaphragm out of it, I turned the water on, and there’s nothing coming out at all.
I love you. You just helped me on my way to save my grass
Thank you for this video. I fixed my sprinkler
Gump you’re a gd genius!
Thanks for the Video. Have a Hunter Sprinkler system with an Orbit B-Hyve controller. Everything was working fine till a few weeks. I was watering manually using the Orbit app and we had a week of sporadic rain in Toronto so didnt need to water. This weekend tried to water and there was no water in any zone using the app. Deleted and reinstalled the app. Checked the voltage and Ohm at the controller end. Also tested each solenoid and had a steady reading. Even replaced the controller. I can turn on the water for each zone by turning on the solenoid using quarter turn but other than that I cant get the controller to water. Not sure where the fault is. Appreciate help
So you have to undo the turn the little values AND disconnect the wire for the sprinkler system to work?
Turning just the little values on and NOT disconnecting the wire won't work, correct?
So informative!
What if the screw does not turn on the sprinklers?
Thank you, thank you! You are a lifesaver!
Hi
Thanks for the video. I appreciate it 😊
The master valve has two wires coming from the timer and one wire color going to each solenoid wire ...is that correct? That is going to be why the faucet near my master valve only works when valve is turned on manually? Isn't it? I just don't understand how the other sprinklers all seem to be working except one.
I'm facing the same issues I'm assuming you've other boxes underground
I dont have any wires in mine, just another hand valve and its already open
Will that cause it to make a humming noise for a few seconds then followed by a click sounds?
That means the sprinkler turned off
Thank you
Magical
Hope it does the trick!
Hi boss I need seen full video.
I being looking for my main valves for a month and still can’t find it…
Any possibility that my sistem don’t have one? I just move in to my house
I found mine by following the wires coming from the control box and followed them to the sprinkler manifold which was in a box right next to the main water valve from the city. I know it has been a while but I hope this helped.
Quick question? mine take about 20 minutes to come on after I turn them on all the heads bubbling and after 15 or 20 minutes the stop bubbling then they come on..any idea?
Is there still good pressure?
Losing water somewhere. Should only take few mins max to fully pressurize system
thank you for the info very helpful
I would call you but I'm in south Texas lol
There’s no lever on my valve
I need some help with it. I don't know how to fix it. If you provide the telephone number, will be helpful. Thanks
Sir job MIL skti hai irrigation technician me experience 3saal ka
What is your phone number sir?
In my control panel I have multiple color wires… orange, yellow, blue, green