Oh this brings back memories. I remember swapping the master cylinder on my 1990 CRX Si with a Civic EX cylinder and it made a nice difference. Later on I bought a 92 Civic CX hatchback and swapped over JDM Civic SiR brakes (discs on all 4 wheels) and had to swap over the rear trailing arms, the 40/40 prop valve, and the e-brake cables, too. I learned a ton on Honda's.
Very cool vid bud , yes you always put a lot of work into your video production and editing special effects like the oil draining but we all know where that soundtrack came from🤣 Cheers
Bro I can’t stop watching your videos..@ 20:25 I was completely blown away by what u did holy crap(can’t believe my 👀)(no spark plugs).u got mad skillz, mechanic, electrician & video editing..wish I’m as talented as u are..💯🔥 👍🏼
Your videos are very inspiring, just bought my first crx same model in these videos and now I know what to expect. Fearing mine has way more rust. Lol I don't have money to fully restore or replace parts right now, so I like how you cleaned up rust and you know all the small things. Very helpful videos, thank you.
LOL 9:03 can't tell if he's singing ooohhh or ewwwwww about the dirty part and then as you turn it around and see the cobwebs the guitar goes boing! Perfect timing man! NOTE: must've missed it but didn't see anything about the power door locks or bad smelling carpet.
That came out nice. You should notice an absence of body roll. I have one in my Buick (OEM) because of plastic fenders. It's meant to stiffen the body, not really affect the "suspension".
The digital audio cracked me up. That was nice of K tuned to help out. Oh man you got me again with the oil draining. Nice give away. See you on the next one!
Glad you enjoyed it ! Yes it's nice to get some sort of help on my build. Already have thousands invested😩. I cracked myself up editing this video😂 thanks for watching
I think it might have helped to lower both rear struts out of their holes to just before they fall out of their holes, sit the bar in, then bring the struts back up. Sometimes that's what you have to do with front strut braces. I had to do that on mine for my satty.
Yes I've had to do that before on some of my other cars. I was just trying to avoid that this time 😂. The strut tower bar came out looking good! Im happy with it .thanks for watching
Just recently discovered your channel looking for CRX restoration builds. So far it's excellent and can't wait to see how it turns out. Makes me miss my 1st Gen, and is encouraging me to be irresponsible and get a 2nd Gen.
Thanks, I appreciate it. Its really easy to spend 30 mins to record something that turns into only 10 seconds in the final product. Gotta be creative. You can do it! 👍💪
Really appreciate your support bro. Boosted rsx is so bad ass . it'll be a monster 💪💪 you can do it. I never thought id being doing a build like this and here I am. Even if it takes years of saving up like I did. Eventually you'll get to your goal .🙏👍
I found your channel while looking for brake caliper rebuilding instructions so I can have an idea of how to do it on my gf's B16 swapped EJ6, and I went down a rabbit hole watching a bunch of your videos. Fun to watch and clearly improving at video editing, you inspire me to hopefully go out and make a video of my own someday. These videos are pretty damn good, just fix the issue with low frame rate (it seems a lot of your footage is sub 24 fps, for whatever reason) and you're up there with chrisfix as far as video editing goes. Edit: Also, do you do this professionally? You've got a shit ton of nice toys for an average hobbyist.
Thank you , I appreciate you watching. Alot of my older videos was just recorded with a cell phone thats why it doesnt look to good. As you saw in this video I picked up a proper sony camera but the issue i was having here is the light bulbs inside my house dont agree with the camera. So I was getting the horizontal lines on the screen, to compensate for that I had to lower the shutter speed of the camera but then that causes the blury effect or "slow motion" . my new camera is now recording at 4K 30fps . im aware of the quality of my videos thats why just spent about $3,500 worth of equipment. Hopefully my video quality gets better👍I appreciate the compliment. I have so many tools because I fix cars for a living , so buying all these toys to fix cars translates into tools I can use on the crx and engine build 👍💪
@@duhjooner I just checked it, yes it a LED board . unfortunately it was just installed not long ago and its hardwired in . so its not a case of simply just changing a bulb. I have to get it changed anyway because its really effecting my videos since i plan on recording more in that room
@@themechanic6117 You could buy some photography lights and diffusers, if you're super serious about continuing to film. That way you can film essentially anywhere, and not worry about lighting.
@@duhjooner I didnt think about that... Thats a great idea. Its funny because after spending $3,500 i told my wife im not going crazy and buying lights for recording... And now here I am😩😂 ill look into some affordable diffusers . gotta ease myself into it lol
I installed the Fastbrakes Wilwood front 4 piston caliper kit and am wanting to do this upgrade to the rest of the brake system. What year make & model is the 40/40 prop valve off of? Cool video, subscribed.
Hey dude... your playlist is backwards chronologically. The newest video is the first thing that will play and the oldest will play last. For a playlist, this should be reversed. It's enough of a struggle to deal with your accent. 😆 CHEERS!
I'm late to the party but lovin to watch the build. I've got a 91 I'm doing now. Where did you source the emergency brake handle boot and the Passport JDM rear strut brace (they're out of business now as far as I know). Thanks!
Thanks for watching. The boot came off ebay, it was a new part that got shipped from Japan. Yes the password stuff is out of business. I bought the brace about a month before they're officially stopped selling their parts
DAMN. SERIOUS CAMERA. WAAAT? Amazon's got nice "packages" for that camera. All the frame, SMD, straps, bag, lenses, TFT monitor, etc. And here- I thought you be strugglin, helpn the strugglin po Folk, eatin welfare cheese- and you whip out *thousands* in video equipment, and *thousands* in K-Tuned toys. WTF- you runnin a spot on the side too?
Yeah my new camera costs me about $1200 -$1300 if i remember correctly. I figure if people enjoy the crx content its worth investing in nice equipment. Im sure you can tell my recent crx videos look way better quality than the stuff i use my cellphone for. The ktuned stuff is just stuff I've been buying little by little over the years .im just good at saving my money. I grew up poor and always will be.
A rear strut brace makes a world of difference on a golden era Honda!
Good to hear
Oh this brings back memories. I remember swapping the master cylinder on my 1990 CRX Si with a Civic EX cylinder and it made a nice difference.
Later on I bought a 92 Civic CX hatchback and swapped over JDM Civic SiR brakes (discs on all 4 wheels) and had to swap over the rear trailing arms, the 40/40 prop valve, and the e-brake cables, too.
I learned a ton on Honda's.
Great video! Looking forward to the next one.
Thanks for watching. Im looking forward to the fuel system refresh 👍
Very cool vid bud , yes you always put a lot of work into your video production and editing special effects like the oil draining but we all know where that soundtrack came from🤣 Cheers
Lets just say ive been watching the austin powers movies recently😂😂👍
Bro I can’t stop watching your videos..@ 20:25 I was completely blown away by what u did holy crap(can’t believe my 👀)(no spark plugs).u got mad skillz, mechanic, electrician & video editing..wish I’m as talented as u are..💯🔥 👍🏼
I like the direction the CRX is heading! Thumbs up!
Really enjoying the series on the crx.
Great! Thanks for watching!
Fantastic job Jonathan! The engine looks great and I loved the potato and the Pokemon! 👍😂😂😂
It's pikachu ! 😂
The CRX may not run like a race horse just yet, but it sure pisses like one! LOL! Great video!
It has one hell of a bladder😂👍
Your videos are very inspiring, just bought my first crx same model in these videos and now I know what to expect. Fearing mine has way more rust. Lol I don't have money to fully restore or replace parts right now, so I like how you cleaned up rust and you know all the small things. Very helpful videos, thank you.
You're welcome. Enjoy the car. It always puts a smile on me when I get to drive it around
Great job bro I love how the engine sounds . I'm waiting on the next video 👍👍👍👍👍
LOL 9:03 can't tell if he's singing ooohhh or ewwwwww about the dirty part and then as you turn it around and see the cobwebs the guitar goes boing! Perfect timing man!
NOTE: must've missed it but didn't see anything about the power door locks or bad smelling carpet.
Lol good eye, I didnt notice how well the music lined up. The carpet and door locks is in a previous video 👍
Very clean process keep it going
Thank you
Your video editing skills is to the same standard as your mechanical work. Enjoying watching this project. 👍
Good stuff here!
Great video... Nice to see you take the time to do your work...
Thank you. Thanks for leaving a comment
That came out nice. You should notice an absence of body roll.
I have one in my Buick (OEM) because of plastic fenders.
It's meant to stiffen the body, not really affect the "suspension".
The crx needs all the chassis stiffening it can get. It creaks and cracks going over bumps
Thumbs up, great video! I am starting my k24 build soon. Dreading the small stuff, including cleaning the block..
Looks good
I been binge watching your vids
Thank you 👍💪
It's awesome to see how far along you've come with your build and your videos! Looking forward to seeing more!
Thank you. 🙏plenty more videos to come
Enjoying the vids.
Thank you. I appreciate it
These videos are great. Thanks
Thanks for watching
Evacuation complete 😆
The digital audio cracked me up. That was nice of K tuned to help out. Oh man you got me again with the oil draining. Nice give away. See you on the next one!
Glad you enjoyed it ! Yes it's nice to get some sort of help on my build. Already have thousands invested😩. I cracked myself up editing this video😂 thanks for watching
Nooooo monicaaaa! This can't be the last video! I CAN'T WAIT to see the engine in the CRX. Much love bro 🚙
😂😂 thanks for the support. Plenty More videos to come 👍
Another video, yeh baby!
💪👍
Nice build man. When my eg is done we should cruise man. Very nice build! 👍🏽
Thank you 💪 k swap in your eg ?
@@themechanic6117 yes k24a, picked it up from chi-jdm. trying to find a k20 head.
I think it might have helped to lower both rear struts out of their holes to just before they fall out of their holes, sit the bar in, then bring the struts back up. Sometimes that's what you have to do with front strut braces. I had to do that on mine for my satty.
Yes I've had to do that before on some of my other cars. I was just trying to avoid that this time 😂. The strut tower bar came out looking good! Im happy with it .thanks for watching
Just recently discovered your channel looking for CRX restoration builds. So far it's excellent and can't wait to see how it turns out. Makes me miss my 1st Gen, and is encouraging me to be irresponsible and get a 2nd Gen.
Do it! Get a 2nd gen lol. You already know they're fun cars. Thanks for watching . plenty more to come 👍💪
@@themechanic6117 haha I wish. I'm just getting started on restoring my 87 Supra. Looking forward to seeing your work 🤘
Thumbs up!
Thank you
Amazing work man! I need to step my video editing up! Engine looks great
Thanks, I appreciate it. Its really easy to spend 30 mins to record something that turns into only 10 seconds in the final product. Gotta be creative. You can do it! 👍💪
I admire your work i really do! I have a 05 Rsx Type S that i will soon boost and do what you did. Rebuild the entire motor. You motivate me bro!
Really appreciate your support bro. Boosted rsx is so bad ass . it'll be a monster 💪💪 you can do it. I never thought id being doing a build like this and here I am. Even if it takes years of saving up like I did. Eventually you'll get to your goal .🙏👍
your vids are fire. nice build.
Thank you 👍
Lol nice left wheel studs.....
Great video! So much better image quality with the Sony camera! Waiting for your new updates!
I agree! New camera looks way better! More to come! Thanks for watching
Nor-Cal love the vid bro!
Thanks for watching
After seeing I who's that pokemon I had to laugh and go make sure I liked and subscribed already 😂
😂😂thank you. I appreciate it
My mom would b like "you don't need all them paper towels boy, one is plenty!" Lol
😂😂 it's funny cause it's true
Great video
The SMA utility knife move was awesome. Please make fun of the brake clean music thing next.
That wasnt intentional lol but it works. The brake clean sound effect is epic 😂👍
Just waiting on u to fix the rust on the crx when it get warm
I need to buy a good welder before I can start repairing things so im saving my pennies. 👍
*@**9:15*
That music is sad as fuck. It makes me remember cars I had to junk.
Sorry. I have limited music section lol
I found your channel while looking for brake caliper rebuilding instructions so I can have an idea of how to do it on my gf's B16 swapped EJ6, and I went down a rabbit hole watching a bunch of your videos. Fun to watch and clearly improving at video editing, you inspire me to hopefully go out and make a video of my own someday. These videos are pretty damn good, just fix the issue with low frame rate (it seems a lot of your footage is sub 24 fps, for whatever reason) and you're up there with chrisfix as far as video editing goes.
Edit: Also, do you do this professionally? You've got a shit ton of nice toys for an average hobbyist.
Thank you , I appreciate you watching. Alot of my older videos was just recorded with a cell phone thats why it doesnt look to good. As you saw in this video I picked up a proper sony camera but the issue i was having here is the light bulbs inside my house dont agree with the camera. So I was getting the horizontal lines on the screen, to compensate for that I had to lower the shutter speed of the camera but then that causes the blury effect or "slow motion" . my new camera is now recording at 4K 30fps . im aware of the quality of my videos thats why just spent about $3,500 worth of equipment. Hopefully my video quality gets better👍I appreciate the compliment.
I have so many tools because I fix cars for a living , so buying all these toys to fix cars translates into tools I can use on the crx and engine build 👍💪
@@themechanic6117 Are they LED lights? Switching to old fashioned incandescent bulbs should fix the problem.
@@duhjooner I just checked it, yes it a LED board . unfortunately it was just installed not long ago and its hardwired in . so its not a case of simply just changing a bulb. I have to get it changed anyway because its really effecting my videos since i plan on recording more in that room
@@themechanic6117 You could buy some photography lights and diffusers, if you're super serious about continuing to film. That way you can film essentially anywhere, and not worry about lighting.
@@duhjooner I didnt think about that... Thats a great idea. Its funny because after spending $3,500 i told my wife im not going crazy and buying lights for recording... And now here I am😩😂 ill look into some affordable diffusers . gotta ease myself into it lol
Great work bro, I really enjoy watching your videos. Where did you buy the booster and master cylinder from? I need them myself Lol
Thanks for watching. I got those parts from rockauto .com
@@themechanic6117 thanks! I got a DA brake conversion for the rex so I'll be needing this.
Fastest way to add 12whp
😂 thats generous. Maybe 7hp lol
No Loctite on the flywheel bolts? I highly recommend that you use Loctite.
Its only on so i cant occasionally crank the engine. Once its ready to go in the car ill install the rear main seal and loctite the bolts 👍
Hey can you do a vid on your sensors and cleaning your throttle body
On my k24 engine?
Damn, so much going on, can't wait for next updates... that gopro potato made me LOL, btw, have you thought about L15B7 swap instead of K?
No i have not thought about that swap lol . seems interesting! Definitely more to come for this crx
Now lets see you drive through some mud.
Id rather not...
I installed the Fastbrakes Wilwood front 4 piston caliper kit and am wanting to do this upgrade to the rest of the brake system. What year make & model is the 40/40 prop valve off of? Cool video, subscribed.
I barely remember but I want to say it came off a 91 crx si
@@themechanic6117 hmm I’ll check to see if mine is stamped 40/40 then, because mine is an Si. Thanks for the quick reply. 👍🏼
Hey dude... your playlist is backwards chronologically. The newest video is the first thing that will play and the oldest will play last. For a playlist, this should be reversed. It's enough of a struggle to deal with your accent. 😆
CHEERS!
Sorry i dont know how to fix that. Thats why I have the videos numbered. Start with number 1
I'm late to the party but lovin to watch the build. I've got a 91 I'm doing now. Where did you source the emergency brake handle boot and the Passport JDM rear strut brace (they're out of business now as far as I know). Thanks!
Thanks for watching. The boot came off ebay, it was a new part that got shipped from Japan. Yes the password stuff is out of business. I bought the brace about a month before they're officially stopped selling their parts
@@themechanic6117 Thanks! But ugh. Both not the answers I was hoping for :-)
i love you
😂😂😂😂😂😂😂😂👍👍
Thanks for watching👍
Where did you get those mudflap from they look super new
They are new, I found mine on ebay. New from honda
Nice work but your qp is rusting out
Thanks, that'll get fixed eventually
is your shutter speed double the frame per second(fps)? in your camera
Bro, Why did you have to remove the old proportioning valve?I’m doing the same conversion on my 88. Wasn’t they the same?
From what I read online , the rear drum brake and rear disk brake cars use a different proportion valve
How much that transmission cost you?
If I remember correctly it was $1300
How did you find out the skunk 2 rear camber arms were fake? I just bought the same ones and want to me sure I didn’t get screwed
The quality looked off. It didnt fit right and i dont believe the real skunk2 say EF/EG/EK on them
What brake booster did you buy to make this happen I got one for my crx si 89 but it wouldn’t fit and also master cylinder
It's a brake booster and master from a 91 integra
Where do you get the manual book for your honda crx?
Found it on ebay . It'll say civic/crx
Okay sir..do you mind give the link? So i might get the same book as yours
And i just check ebay..there are tonnes of manual book for crx..could u please send me the link..btw ur manual book do have wiring diagram?
www.ebay.com/itm/1984-1991-Chilton-Honda-Civic-CRX-Repair-Manual-/380643743413?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Yes it has wiring diagrams in it
DAMN. SERIOUS CAMERA. WAAAT? Amazon's got nice "packages"
for that camera. All the frame, SMD, straps, bag, lenses, TFT monitor, etc.
And here- I thought you be strugglin, helpn the strugglin po Folk, eatin welfare cheese-
and you whip out *thousands* in video equipment, and *thousands* in
K-Tuned toys. WTF- you runnin a spot on the side too?
Yeah my new camera costs me about $1200 -$1300 if i remember correctly. I figure if people enjoy the crx content its worth investing in nice equipment. Im sure you can tell my recent crx videos look way better quality than the stuff i use my cellphone for. The ktuned stuff is just stuff I've been buying little by little over the years .im just good at saving my money. I grew up poor and always will be.
For a hand brake cover hope that helps www.autopart3.com/collections/1988-1989-honda-crx/products/88-89-honda-crx-oem-parking-brake-handle
Thanks for looking. I still have the original one which looks to be in the sane condition. I was hoping to find a clean one which might be impossible