FRANKE ASCONA - How to replace the tap cartridges / valves repair leaking PARTS FROM
HTML-код
- Опубликовано: 7 июн 2017
- @tapmagician Buy Parts here: tapmagician.co.uk/NSManufactu...
**We now also have a special removal tool available to make it even easier for you to remove.
Tap Magician Short video demonstrating how to remove the tap handle/lever, and replace the internal tap valve, when the cartridge only has two flats instead of a hex nut. No special tool is needed all you need is an adjustable spanner and some grips (or two spanners).
Original Franke spare part codes SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053 133.0150.220, 133.0150.219, Cartridge has 28 teeth on the spline.
We also supply the spout o'ring repair kit if your tap is leaking at the base of the spout. Please contact us at sales@tapmagician.co.uk for any help or advice needed.
If your Franke Ascona kitchen mixer tap is dripping or leaking out of the spout then its time to replace the ceramic disc cartridges. The cartridges are quarter turn and are available as hot and cold. Tap Doctor. Tap Fix. Tap Repair. Monobloc Kitchen tap.
How do I remove the tap handle on my Franke Mixer tap? Tap Barrels. Tap inserts. Tap Glands. Tap Washers.
Ascona U Spout Mono Mixer Chrome and Silk Steel 
Хобби
![Megan Thee Stallion - BOA [Official Video]](http://i.ytimg.com/vi/TKQY2ZlIEjY/mqdefault.jpg)
Found this video helpful? Please hit Like and subscribe for us! Buy Parts here:
tapmagician.co.uk/NSManufacturersShoppingSelect.aspx?ENC8FC274C2&Franke&Ascona
This is why RUclips is great. P.S. 14mm deep socket was fine for me (original valves) as the spanner on spanner or grips on spanner can be tricky to keep the spanner jaws on the flats.
Done the exact same with a 14mm deep socket. Shifter was going to turn hex into a circle as valve was very tight. Video was very handy through thanks
A socket won't remove the cartridge shown in this video.
Right this moment...best video on You Tube. Very helpful! Thank you!!
Great video! Thanks!
Great video. I can't understand why all the other videos for this are about 15 minutes long! Do they stop for tea in the middle? I don't know, because there's no way I'm going to watch them!
Really important to note he says use a 2mm Allen key, if you use a larger one then it feels like you are doing something but it will jusr turn and turn
One of the grub screw heads had been stripped. New tap handle £20 and a junior hack saw, good as new.
Amazing. So easy I done it myself and I am no plumber.
Is the thread also anticlockwise to undo on the hot tap?
Is there nothing you can't find on RUclips, cheers TM.
way easier if you remove the tap cover as well!
How do I find out which cartridge is causing the leak, sorry if a dumb question 👍
Turn the supply off to one of the inputs, if the leak stops it’s that tap if it doesn’t it’s the other one, simples !
Any other tips given that the original valve is still stuck.
Hi, Please send us an email directly with a photo of your cartridge. Is the nut rounded off?
My tap handle is now not symmetrical with the other...how do I fix?
Please have a look at the video on the link here ruclips.net/video/zTX6dWEZnjg/видео.html
Great video - tried to do mine but the cartridge just wont budge! Any more clues for getting the cartridge out?
Same the Cartridge just wont budge
@@williamjrentonrose took me ages to figure this out. remove the tap cover first!
14mm deep socket
We now have a removal tool for this tap (especially helpful if you have the old cartridge with no hex nut) tapmagician.co.uk/NSManufacturersShoppingSelect.aspx?MV02=Franke+Ascona
This method didn’t work for, spanner just kept slipping off. This is a replacement for a previous one of the same model. The valves are rubbish, always end up leaking. The new taps now have hex nuts, so use a socket wrench. My language would have been a lot fruitier if the guidelines allowed.
what a stupid idea from franke