I've had it for a few years now and there is a small lost in bass that can be almost EQ'd out but no dropouts at all within a reasonable range. Run one speaker with a cable and use the pack on the other speaker and you'll hear the difference. I always go sub up so my alto pack is plugged into the sub. But all in all it's a good system and by far beats BT for dependability. I rarely use this system but I think I'm going start using them more again for a cleaner setup.
Hey MasterP... when talking over these alto's.. is there a noticeable latency?? I tried the WiDigital for about 3 weeks.. junk, had to send back.. but decided to look again... Thanks!
I got this in October this year. My main rig was setup in the backyard at the venue and I had two remote ZLX15p's upstairs and inside the venue for the dinner area. Worked really well.
Great job.....I happen to have the system....did two events and the results were EXACTLY as Rachel described........Very affordable time saving solution
Thanks for sharing. Had mine for a few years now. Everything from wedding to Airshows. Never a problem. 6 receivers and two transmitters. I do change the channels on the regular. I wish Alto could give us some news on the newer versions that were to could out years ago.
I've had them for years and use them all the time my longest range I've done is at a annual car show. Over the years I have figured out it I put my transmitter on my photobooth back drop stand it gets it up about 9ft and I have ran my speakers out about 300-400ft with no dropouts. There is a slight delay but you need some if your that far out so works perfectly. I just need to buy the new version since mine are the old frequency version.
Is that my fav compact controller the MC6000MK2 ? Well Im selling mine and upgrading to the Roland 707M!! Yes I bought the Alto Stealth Pro system after canceling my order of the Xvive U3s. The power cord name you failed to mention is, Hosa PWD-402 2FT Piggyback IEC C13 to NEMA 5-15P Power Cord. say, thank you doctor.
My product completely failed on me at a house party. Don't know if the receivers were too low to the ground or what, but it definitely put a damper in the party because the feed would go in and out. It was pretty close quarters and the system might have had a hard time with the amount of people's phones. I'm going to give it another try with the receivers at a higher position.
@@islandvibe3855 I did. I found out there's three settings on the side to help with the Radio Frequency interferences. When I switched them around it helped. But still get those cut-outs and I'm deathly afraid of that happening during a ceremony with no solution. So I've been running corded. And trying to not go too far past the limit.
DJ RACHEL you should do ALL reviews for IDJNOW, you are the best! I hope they pay you what you earn for 1 gig for each review. Whats the difference between this wireless system and the other one you reviewed where it was just a stick you plugged into the speaker? That one seems so much easier.
If that's the Alto Total, it's a bluetooth receiver, so the range is more limited, there's a slight delay, and you have to already have a bluetooth device/transmitter.
Thanks for sharing and demonstrating this wireless system. One test performed on agiprodj was using a wireless microphone, go out to your furthest speaker and talk into the microphone. From that, you can see your mouth moving and hearing the sound from your speaker to prove no delay. It's great that you say there's no delay, but to see it in video is ... well you know. Anyway, I am very thankful for your video as agiprodj's system does not support wireless system straight from amp to speaker. So, I was bummed about that and then found your video. I'm going to Guitar Center tonight to pick up my first wireless system! Man, I feel like my response is a huge ad for others...LOL
Thank you so much for your feedback!! Yeah these wireless systems are great! If you haven't gotten one yet and are still looking to get it, give me a call at 631-239-7750 and ill work out a great deal for you. Or call our 1800 number - 1.800.355.7746
Hello Dominic, if you are mainly doing outdoor ceremonies on the beach where power is an issue or none available at all the best and portable option is powered battery bluetooth speakers enough for cocktail hour or ceremonies. if you need or have any further questions feel free to contact me. Thx
Hey DJ Rachael, best 17 minutes I've spent on YT in, like.. FOREVER!! quick question if you don't mind, when talking over these alto's.. is there a noticeable latency?? I tried the WiDigital 3yrs ago and they were junk.. but decided to look again, just wondering how these are... Thanks!
So instead of running 400 feet of speaker cable you ran 350 feet of power cable? Any experience with Sennheiser or Xvive wireless receivers? Seems like an easier option.
Well you have to run power cables regardless to power the speakers. This allows you to not worry about needing the correct length XLR's. But I see where you are coming from.. Sennheiser makes great stuff, but its still going to need power if its not eating up batteries.
As far as we know, Sennheiser doesn't have a unit like the Alto Stealth to truly do a comparison. The Alto's are great though and the one thing we've noticed is the higher the transmitter is placed the better the signal is.
Thank you for the review, I found it very interesting! I'm considering this setup for a live band performance, should I be concerned about any latency? I'm thinking that as a DJ you might afford to sacrifice some latency for the convenience (please correct me if I'm wrong), but a in our playing situation that might not work, as we don't have a sophisticated monitoring system to isolate our selves from the main speakers. Your thoughts are much appreciated! Thank you
Thank You for the great and detailed review!!!! That said, I did have 1 question. When you had your setup and the car show. I noticed your two main speakers setup right in front of your DJ Booth, and then you had the other speaker with the Alto Wireless pack in the far distance. And so, my question is.... Did you have all speakers setup using the Alto Wireless packs, or did you have your speakers setup in a hybrid setup where your two (2) front mains were cabled, and only the far speakers were setup via the Alto Wireless packs? I'm curious as that would be nice to see that is can also work in a hybrid setup. i.e. the more options the better.
GREETINGS PLEASE I WANT TO ASK IS IT POSIBLE TO USE CABLE ON MY SUBWOFER BECAUSE IS PASSIV AND THIS ON MY 15 INCH SPEAKERS PLEASE WILL THE SPEAKER GO WELL MIXED WITH CABLE AND WIRELESS PLEASE ADVICE THANK YOU..
@@DJRachelLynch & IDJNOW.COM - Those IEC piggyback cables are great and they have their uses, however, I don't recommend them for use with speakers, as they can vibrate loose; this is why all QSC speakers have always included locking IEC power cables...
Very nicely demonstrated. I have a question if you can reply. My powered speakers (Samsung) can accept ONLY blue tooth signals. The speakers do not have any socket. What is the way out?
Hello Arun if they are not PRO P.A there may not be a way out however they do make some devices that you can plug wires into a bluetooth box and from that bluetooth the signal to your speakers. thx.
I have the extender pack but need the wireless box. Should I try to find this or get the pro system and will it work with this extender pack? How much will it cost. I have bought things from IDJ now in the past.
Hello Ed, it would have to be uniform. so if you get the pro you will have to stick with the pro versions as they are working with their assigned channels and bands vice versa for the stealth. Rich P.
Hello Showmak, If just want to playback tracks of bluetooth then this would be the cheapest option www.idjnow.com/2-alto-bluetooth-total-professional-xlr-equipped-rechargeable-bluetooth-audio-receivers-with-cable-case-package.html if not contact deals@idjnow.com So we can work out pricing if you need to go with a wireless transmission from your dj setup. thx
Great review Rachel. I'm looking at getting these. I see theres different models on sale. Would you recommend the pro version, I'm guessing you used the standard model?
You made a great video and it’s very insightful. Unfortunately for me this product was a total fail. I like the concept but alto just comes up short with this offering. I remember them announcing a pro version but that never made it to market. I ended up using the Sennhieser G3’s and they have worked perfectly.
Sorry if you answered this already. I have my 2 main speakers plugged into my controller via xlr. Where would I hook up the alto transmitter on my controller?
Rachel, have you had any problems with the Stealth wireless interfering with your wireless mics and say a sennheiser EW wireless speaker packs? Thank you.
What’s the name of the power splitter, I go to idjnow website, but it’s not showing up, if you can tell me the name or item number so I can order two, thanks
Hello AMamea, thx for your question. there's not issue if your blending 2 or 3 or even 4 sources. there's no delay as long as you're within 100 feet line of sight. the only delay you can have if the room has high ceilings or i should recommend a DSP to set the sound delays and align it with your front house mains.
Hello Dj easy, if your talking about this power splitter here is the link: www.idjnow.com/hosa-pwd-402-cord.html if you have any questions feel free to contact me thx.
Hello DJ King, the differences are that the wireless can be used within 100 feet line of sight whereas the pro version is up to 330 feet max line of sight. offers more channels as well. thx.
Hi thanks for the review, I've just bought one. I'm just getting into PA - Would you recommend a XLR "speaker cable" from the stealth receiver pack to the active speaker, or a "microphone cable" as it's seems to be a slightly different configuration as opposed to XLR coming straight from speaker to mixer?
Thanks for your question! XLR speaker cables and microphone cables are the same cable. You can use a cable as such - www.idjnow.com/clutch-20-foot-xlr-cable.html
can I use this device to connect my surround sound speakers in the back of my living room to avoid the cables? my home system has surround sound pre out RCA also speaker wire out, do I need adapters. thanks
DJ rachel, I have a gig coming up where I am using two EVs for my main setup and the JBL EON ONE compact for a different room. My question is, I'd like to have all three wireless, so how do I incorporate my QSC Subwoofer to this setup ? As of now I connect my controller into my external Yamaha mixer. My outs (XLR) from the mixer come down to my 18" QSC sub and then from my sub out to my two tops. Where do I incorporate the Alto wireless stealths in order to still route my sound out of my subwoofer into all three tops ? Do I plug my left and right out from my Subwoofer into the Alto receiver ?
You can connect the stealth to the mixer and go to the three tops with the receivers and then connect the sub to the two mains that are in the same room with wires. Or you can get five receivers and plug two of them into the sub since it has a left and right.
Trying to find the power splitter you used on the back of the speaker, cant seem to find that anywhere online. Can you send a link of some sort? I was also wondering if it would be safe to use the plug to plug in my 18inch subwoofer. I would be using the 15' high on a pole mount with my 18' subwoofer. Currently I'm running 2 long extension cords to power both speakers. Any help would be appreciated, thanks.
Hey DJ Rachel, is there any particular way that I have to pair the expander pack with my Alto Stealth Wireless professional system or is it plug n play? Thank you =)
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Just purchased and used it on Sunday .Fairly large room.The system worked great.Three speakers plugged in .Very much impressed.
Thanks for the feedback!!
This wireless system is all that you said it was. I have had it for about two weeks and it is AWESOME!!!
Glad you love it!!
I've had it for a few years now and there is a small lost in bass that can be almost EQ'd out but no dropouts at all within a reasonable range. Run one speaker with a cable and use the pack on the other speaker and you'll hear the difference. I always go sub up so my alto pack is plugged into the sub. But all in all it's a good system and by far beats BT for dependability. I rarely use this system but I think I'm going start using them more again for a cleaner setup.
Hey MasterP... when talking over these alto's.. is there a noticeable latency?? I tried the WiDigital for about 3 weeks.. junk, had to send back.. but decided to look again... Thanks!
I got this in October this year. My main rig was setup in the backyard at the venue and I had two remote ZLX15p's upstairs and inside the venue for the dinner area. Worked really well.
Thank you DJ Rachel.. .. That's all I needed to know lol... Def my next purchase!!!!
Received mine yesterday and bought 2 extenders off ebay to make it 4 receivers total. Gonna have some fun using it. 😎👍
I bought one thanks to this review! Thanks Rachel!
awesome! SrVnDaNK Thx for the support and thank you Rachel!
Have to say you do a great job “walking” us through.
We appreciate the feedback.
@idjnow-gear-up what's the range on it?
The best walkthrough on RUclips!!
Thanks for the feedback!
Already have them are great and convenient ... especially great for Weddings !!!
Thank you DJ Rachel! Very informative.
I'm Sold, Fantastic review Dj Thanks for sharing.
I bought this just now from iDJNow just because of this video! Well done and thank you for the demo!
Thanks Buzz!
Buzz Allen I have it works great
@@DjBriteEyes - it does not work well at all.
Buzz Allen works for me but I use it with line of site I don’t use it that often though
Just ordered a Stealth system and the Expander Pack. Can't wait to use it!!
We most definitively appreciate the business!
Great job.....I happen to have the system....did two events and the results were EXACTLY as Rachel described........Very affordable time saving solution
Super helpful review. Home demo and then the Car show demo made this product come to life. Thanks for making this video.
Mine is coming next Tuesday. 😎👍
Thx for the support Optimus Prime.
Thanks for sharing. Had mine for a few years now. Everything from wedding to Airshows. Never a problem. 6 receivers and two transmitters. I do change the channels on the regular. I wish Alto could give us some news on the newer versions that were to could out years ago.
The new Pro series is out!!, Long overdue..
Great review! Impressed the signal is so clean, and receiver on the speaker other-side of the house - thanks!
Thank you for your feedback!
I've had them for years and use them all the time my longest range I've done is at a annual car show. Over the years I have figured out it I put my transmitter on my photobooth back drop stand it gets it up about 9ft and I have ran my speakers out about 300-400ft with no dropouts. There is a slight delay but you need some if your that far out so works perfectly. I just need to buy the new version since mine are the old frequency version.
Glad you're happy with the units!
How do you know which is the new version?
thanks for taking the time to show us step by step.
Great video. Simple and easy to understand. Besides the best example. My jaw dropped to the floor I'm gonna buy it. Thanks
Right on!! :)
Best review on RUclips. Thank you so much
Appreciate the feedback!
this system is incredible and you explain it very well, I think I need this system, thanks girl
Love this video! Great job Dj Rachel 🔥🔥🔥
Great video. Beautiful property you live on.
🙏 🙏 🙏
Awesome awesome awesome!!! Thanks Rachel!!!!
:) Thanks for the feedback!!
Excellent job on the presentation DJ Rachel!
Just discovered this.Great review. Thanks
Thank you !! Let us know what you think of them if you get them!
Excellent review DJ Rachel. The Altos are good but the Sennheiser wireless system is great too.
I would like see review of sennheiser xsw d
THANKS
No problem!
Rachel, another GREAT video. Thank you.
Glad you enjoyed! Thanks for watching!
Looks like something I could use 😎🎧👍🏻
Amazing tutorial
thanks for the support !
Is that my fav compact controller the MC6000MK2 ? Well Im selling mine and upgrading to the Roland 707M!!
Yes I bought the Alto Stealth Pro system after canceling my order of the Xvive U3s.
The power cord name you failed to mention is, Hosa PWD-402 2FT Piggyback IEC C13 to NEMA 5-15P Power Cord.
say, thank you doctor.
Thank you doctor lol
Excelente Review👌
Damn I'm Sold I will be calling Juan in the West Babylon store to get these ASAP Thanks always wanted to know about these...
My product completely failed on me at a house party. Don't know if the receivers were too low to the ground or what, but it definitely put a damper in the party because the feed would go in and out. It was pretty close quarters and the system might have had a hard time with the amount of people's phones. I'm going to give it another try with the receivers at a higher position.
Did you get the chance to run it again. I had the same issue
@@islandvibe3855 I did. I found out there's three settings on the side to help with the Radio Frequency interferences. When I switched them around it helped. But still get those cut-outs and I'm deathly afraid of that happening during a ceremony with no solution. So I've been running corded. And trying to not go too far past the limit.
DJ RACHEL you should do ALL reviews for IDJNOW, you are the best! I hope they pay you what you earn for 1 gig for each review. Whats the difference between this wireless system and the other one you reviewed where it was just a stick you plugged into the speaker? That one seems so much easier.
If that's the Alto Total, it's a bluetooth receiver, so the range is more limited, there's a slight delay, and you have to already have a bluetooth device/transmitter.
@@PURESOUND4 THANK YOU
Excellent review 👍
Thank you for your feedback!!
Thanks for sharing and demonstrating this wireless system. One test performed on agiprodj was using a wireless microphone, go out to your furthest speaker and talk into the microphone. From that, you can see your mouth moving and hearing the sound from your speaker to prove no delay. It's great that you say there's no delay, but to see it in video is ... well you know. Anyway, I am very thankful for your video as agiprodj's system does not support wireless system straight from amp to speaker. So, I was bummed about that and then found your video. I'm going to Guitar Center tonight to pick up my first wireless system! Man, I feel like my response is a huge ad for others...LOL
Thank you so much for your feedback!! Yeah these wireless systems are great! If you haven't gotten one yet and are still looking to get it, give me a call at 631-239-7750 and ill work out a great deal for you. Or call our 1800 number - 1.800.355.7746
I just bought an Alto TS310 from you Idj.
🙌 Awesome! Thanks for your business! 🙏 If we can ever help again please let us know 800-355-7746 or deals@idjnow.com
I have them works great..
This is amazing!!!! Thank you!!!!
That is really cool. i can use something like that
Sounds good I think am going to try it
Great!
What is the item number for the “pigtail” adapter you show in the video?
wow thank you 👍👍💖
GREAT video. Thanks
Thank you for your GREAT feedback :)
Thank you for this video!!
Hi Tina,
you're welcome.
Any ideas for a mobile power supply for the speakers & receiver?? Love the vids btw 🙌🏽👌🎵🎶
Hello Dominic,
if you are mainly doing outdoor ceremonies on the beach where power is an issue or none available at all the best and portable option is powered battery bluetooth speakers enough for cocktail hour or ceremonies. if you need or have any further questions feel free to contact me.
Thx
What is the name of the splitter
I love this item
Thank you for your feedback!
Hey DJ Rachael, best 17 minutes I've spent on YT in, like.. FOREVER!! quick question if you don't mind, when talking over these alto's.. is there a noticeable latency?? I tried the WiDigital 3yrs ago and they were junk.. but decided to look again, just wondering how these are... Thanks!
Hello Hawkskyflier,
good question. this are used at a max distance of 100 ft line of sight in the same room. there is next to no latency.
thx
Outstanding. thanks.
Hey James,
thx for the support.
Hey !! Great review !! Which one would you recommend this one or the pro
both are good but the pro is always the better choice and has a bit more options as well.
Thx
So instead of running 400 feet of speaker cable you ran 350 feet of power cable? Any experience with Sennheiser or Xvive wireless receivers? Seems like an easier option.
Well you have to run power cables regardless to power the speakers. This allows you to not worry about needing the correct length XLR's. But I see where you are coming from.. Sennheiser makes great stuff, but its still going to need power if its not eating up batteries.
Sennheiser vs Alto stealth ... pros / cons please
Give us a call so we can explain specs. Much easier to do so over the phone. 1800-355-7746
@@idjnow-gear-up Yeah but if you do it here, thousands can benefit from your knowledge and expertise.
As far as we know, Sennheiser doesn't have a unit like the Alto Stealth to truly do a comparison. The Alto's are great though and the one thing we've noticed is the higher the transmitter is placed the better the signal is.
Oh yes🤗
Instead of connecting from my mixer to the transmitter, is it possible to connect it to Main out on my sound board?
Thank you for the review, I found it very interesting!
I'm considering this setup for a live band performance, should I be concerned about any latency?
I'm thinking that as a DJ you might afford to sacrifice some latency for the convenience (please correct me if I'm wrong), but a in our playing situation that might not work, as we don't have a sophisticated monitoring system to isolate our selves from the main speakers.
Your thoughts are much appreciated!
Thank you
Thank you for your reply,
We have not heard of any latency issues as long as you are within the recommended range the unit asks for. Hope this helps!
Thank You for the great and detailed review!!!! That said, I did have 1 question. When you had your setup and the car show. I noticed your two main speakers setup right in front of your DJ Booth, and then you had the other speaker with the Alto Wireless pack in the far distance. And so, my question is.... Did you have all speakers setup using the Alto Wireless packs, or did you have your speakers setup in a hybrid setup where your two (2) front mains were cabled, and only the far speakers were setup via the Alto Wireless packs?
I'm curious as that would be nice to see that is can also work in a hybrid setup. i.e. the more options the better.
JusFnAround I had the QSC 153s (large speakers) connected master out via XLR and the Alto was booth out to k12s.
GREETINGS PLEASE I WANT TO ASK IS IT POSIBLE TO USE CABLE ON MY SUBWOFER BECAUSE IS PASSIV AND THIS ON MY 15 INCH SPEAKERS PLEASE WILL THE SPEAKER GO WELL MIXED WITH CABLE AND WIRELESS PLEASE ADVICE THANK YOU..
Fruit basket? Beer, send them beer!
haha!
Did you notice and negatives with the system?
Flawless DJs needed two slight adjustments during the event when a large lifted truck parked between my booth and the remote speaker.
@@DJRachelLynch & IDJNOW.COM - Those IEC piggyback cables are great and they have their uses, however, I don't recommend them for use with speakers, as they can vibrate loose; this is why all QSC speakers have always included locking IEC power cables...
Hi thats compatible any speaker or bose s1 pro?
Can you still use these if your speakers need a power amplifier
Very nicely demonstrated. I have a question if you can reply. My powered speakers (Samsung) can accept ONLY blue tooth signals. The speakers do not have any socket. What is the way out?
Hello Arun
if they are not PRO P.A there may not be a way out however they do make some devices that you can plug wires into a bluetooth box and from that bluetooth the signal to your speakers.
thx.
@@idjnow-gear-up thanks
I have the extender pack but need the wireless box. Should I try to find this or get the pro system and will it work with this extender pack?
How much will it cost. I have bought things from IDJ now in the past.
Hello Ed,
it would have to be uniform. so if you get the pro you will have to stick with the pro versions as they are working with their assigned channels and bands vice versa for the stealth.
Rich P.
Thank you for the video. Is there a cheaper option for home and small party use?
Hello Showmak,
If just want to playback tracks of bluetooth then this would be the cheapest option
www.idjnow.com/2-alto-bluetooth-total-professional-xlr-equipped-rechargeable-bluetooth-audio-receivers-with-cable-case-package.html
if not contact deals@idjnow.com So we can work out pricing if you need to go with a wireless transmission from your dj setup.
thx
Great review Rachel. I'm looking at getting these. I see theres different models on sale. Would you recommend the pro version, I'm guessing you used the standard model?
Hello Neil,
Unfortunately the Pro version of this unit is discontinued.
Thank you for your message!
You made a great video and it’s very insightful. Unfortunately for me this product was a total fail. I like the concept but alto just comes up short with this offering. I remember them announcing a pro version but that never made it to market. I ended up using the Sennhieser G3’s and they have worked perfectly.
Hey Carlos , sorry to hear you had a bad experience with them. But thank you for your feedback, Much appreciated.
Sorry if you answered this already. I have my 2 main speakers plugged into my controller via xlr. Where would I hook up the alto transmitter on my controller?
you can either use your booth outs or your secondary master outs as well thats if your controller has those extra outputs.
Thx
Cuantos metros alcazan del trasmisor al receptor aproximadamente ?
Great review...
Question: can I use these on a sub and then run the wires from the sub to the speakers?
Never mind I got my answer on the comments 👍👍👍
😄 ❤ 🙏 Thanks for the comment. If we can help further do not hesitate to contact us!
Rachel, have you had any problems with the Stealth wireless interfering with your wireless mics and say a sennheiser EW wireless speaker packs? Thank you.
Could a person hook this into a sub and then run cords off the sub into the speakers?
yes, you would use the outs on the sub to daisy chain your other speakers :)
Hello..... How do you know what channel to use is there a scan?
Hello Harry,
The unit has 16 selectable channels but no automatic pair.
I bout the speaker because of you lol
🙏
🙏
🙏
🙏
🙏
What is that splitter called ,how do I order that
its this:
www.idjnow.com/hosa-pwd-402-cord.html
What’s the name of the power splitter, I go to idjnow website, but it’s not showing up, if you can tell me the name or item number so I can order two, thanks
Still cant find them myself. Wish she added that info.
do they have battery powered options?
Not at this time.. Solid idea!
I'm from Brazil, how do I buy?
Hello @charles Valente,
please reach out to support@idjnow.com
Thx
How accurate is that signal when try to mix and blend? No delay?
Hello AMamea,
thx for your question. there's not issue if your blending 2 or 3 or even 4 sources. there's no delay as long as you're within 100 feet line of sight. the only delay you can have if the room has high ceilings or i should recommend a DSP to set the sound delays and align it with your front house mains.
@@idjnow-gear-up thank you
anytime @AMamea happy holidays
The XLR connector output in the receiver is a Line Bal or a Mic Bal signal ¿?
It is a Mic Bal signal! If you have any other questions you can call us at 1800-355-7746
do you still use it?
So you can have 4 receivers from one transmitter?
That is correct! :)
I can’t find the splitter, where can I order it from?
Hello Dj Easy,
which splitter are you talking about? i can help locate it depending on what you are looking for.
Thx
Hello Dj easy,
if your talking about this power splitter here is the link:
www.idjnow.com/hosa-pwd-402-cord.html
if you have any questions feel free to contact me thx.
I have the same system and work great but I have the expander pack but is not working can you help me with that issue
Sorry to hear that it's not working. Give us a call so we can try to trouble shoot it with you. 1800-355-7746
How do these compare to the pro?
Hello DJ King,
the differences are that the wireless can be used within 100 feet line of sight whereas the pro version is up to 330 feet max line of sight. offers more channels as well.
thx.
Hi thanks for the review, I've just bought one. I'm just getting into PA - Would you recommend a XLR "speaker cable" from the stealth receiver pack to the active speaker, or a "microphone cable" as it's seems to be a slightly different configuration as opposed to XLR coming straight from speaker to mixer?
Thanks for your question! XLR speaker cables and microphone cables are the same cable. You can use a cable as such - www.idjnow.com/clutch-20-foot-xlr-cable.html
whats is the name of the power cable
Hello ProBeats,
this is the power supply info:
Power External Adaptor, 12 VDC/300 mA
Thanks for your support.
can I use this device to connect my surround sound speakers in the back of my living room to avoid the cables? my home system has surround sound pre out RCA also speaker wire out, do I need adapters. thanks
These units are designed to work with an XLR connection.
DJ rachel, I have a gig coming up where I am using two EVs for my main setup and the JBL EON ONE compact for a different room. My question is, I'd like to have all three wireless, so how do I incorporate my QSC Subwoofer to this setup ? As of now I connect my controller into my external Yamaha mixer. My outs (XLR) from the mixer come down to my 18" QSC sub and then from my sub out to my two tops. Where do I incorporate the Alto wireless stealths in order to still route my sound out of my subwoofer into all three tops ? Do I plug my left and right out from my Subwoofer into the Alto receiver ?
You can connect the stealth to the mixer and go to the three tops with the receivers and then connect the sub to the two mains that are in the same room with wires. Or you can get five receivers and plug two of them into the sub since it has a left and right.
Have a 7 piece band w Horn section. How would this work in a tri-amp situation. Any phase issues? Using Ashley Crossovers
Joe,
This unit is not meant for that application. With live instrument events you'll always want to go wired.
Trying to find the power splitter you used on the back of the speaker, cant seem to find that anywhere online. Can you send a link of some sort? I was also wondering if it would be safe to use the plug to plug in my 18inch subwoofer. I would be using the 15' high on a pole mount with my 18' subwoofer. Currently I'm running 2 long extension cords to power both speakers. Any help would be appreciated, thanks.
hey david, here is the link: www.idjnow.com/hosa-pwd-402-cord.html
Hey DJ Rachel, is there any particular way that I have to pair the expander pack with my Alto Stealth Wireless professional system or is it plug n play? Thank you =)
You pair em just like the originals. Nothing changes.
Does the trim left and right control volume level?
Trim control is typically used to adjust the level of the incoming signal as it enters the outsource, recording interface, PAs, mixer, etc. :)
CAN YOU USE THIS SYSTEM FOR LIVE BAND
Surely, it just transmits a wireless signal.
How much?
$399
Buy a open box one setup for $250 on ebay, It'll work just fine.
can you give me a link to that power splitter ?
Here you go! www.idjnow.com/hosa-pwd-402-cord.html