thats badass. makes no sense to shop anywhere other than ebay for stuff like this.its a lip, what more do people want? I doubt that carbon ones are even aerodynamically beneficial. People confuse expensive with quality/actually getting the job done
What good Boost in Motion like the video you made about front lip for Q50 i got a 2015 Q50 your video motavited me to get a front lip I like how you explain with detail and step 👍
Not bad. Love your blacked out grill BTW. As for the front lip, I am a 1-piece guy and I am a body-color guy (I have a 2017 Iridium). I just bought the Stillen 1-piece front lip for $160 and will have it painted body color. But this is not a bad option for those that like a black lip and don't mind 3 pieces.
I really wanted that iridium.. only reason I don’t mind the silver is because the carbon fiber will stick out more. but lord knows this was my first choice!!!!!
Sick!! Looks really well yes! Just ordered mine but for my Lexus rcf. Thank you!!! For telling me to get the PP kind cuz that's is quite an excellent advice! Honestly I ordered earlier just happen to come across your video but luckily I looked and was PP so thank you again!
Great video bro.. just found your channel and you’re helping me out a ton.. I’m considering purchasing the same lip for my 2018... just wanted to follow up and see if it’s still holding up strong even a year later?
This design is much better thqn the one i got for my 15S. It was abs and it did snap on the wrap around on each side of the bumper. Also the 3 piece conected via holes that did not overlay but just butted up together. I personally do not like the 3 piece look but no one looks that hard so it just looks like a one piece. I would love if you ordered one of the CF ones but they are over priced for sure. Especially for an item thats going to get banged up with debris.
@@BoostInMotion so i clicked the link for the 14-17 sport model link and it says in thei description it wont fit the sport? Also it says its made of high grade ABS? what gives man why link us to what you advocated against? PPT OR PU splitters?
some advice, I put a ton of 3m tape on the side pieces. The side pieces also screw in to a much more solid place on the car. The middle piece WILL pull down on you if you use the tiny screws they give you. I bought much bigger screws and don have any problems.
You're supposed to screw all three pieces together before installation (you can't if they're install individually, because they screws together from the back).
I put 3m also but you dont really need it because the side pieces screw into a pretty solid part of the car. The front piece has no place to put 3m. Just get much bigger screws.
@@BoostInMotion Thanks man! Sweet! Trying to figure out a Christmas present for wifey to buy me. haha. I'm in NYC too...SI. Love your channel, I'm new to the platform so still learning.
@@BoostInMotion I just tired to install it didn't work out the middle piece point up to the sky the sides are ok but when applying pressure drilling into the bumper it makes that middle piece point up idk what to do
Ey boost whaen you installing that ebay splitter on did you take out that screw by the end of each side under that holds that bumper and plastic piece together it seems to be on the way of the end piece of the splitter?
I have an Amazon jump off & it’s... MEH...The screws were horrible. Luckily I had self-tapping pan head screws & used double sided tape. The fitment of the lip doesn’t really line up under the fog light inserts, but that’s only if you put your nose right up on it. I even put an Amazon rear deck spoiler & that looked good.As for your ride, it looks good.
Boost In Motion I got this on my Q50... JDM EAU Style Painted Gloss Black Trunk LID Spoiler Wing, I’m thinking about getting the M4 style one though. Thinking about the rear diffuser too
WINNING.... oh I made sure I aligned it correctly. But fuck it, I spent under $90 for it & unless someone got their nose right in it you really don’t notice.
Correct me if I'm wrong, but shouldn't that double sided tape be used in combination with the screws? I had to remove a OEM wing on a 370Z and even though it was screwed tightly in place, there was still 3M double-sided tape all around...
thats badass. makes no sense to shop anywhere other than ebay for stuff like this.its a lip, what more do people want? I doubt that carbon ones are even aerodynamically beneficial. People confuse expensive with quality/actually getting the job done
Good shit but take it easy on the palm transitions lol
Sorry for making y'all delirious. I was trying something new
The lip complements and completes your choice of just installing the black grill surround with the OEM grey center😎
thank you
5:32 that guy almost pulled a neck muscle looking at your car
I didn't notice lol
What good Boost in Motion like the video you made about front lip for Q50 i got a 2015 Q50 your video motavited me to get a front lip I like how you explain with detail and step 👍
I had this it flew away during a race lol
same ...
use bigger screws. It will be fine.
good video... wished you showed a bit more of the drilling piece of the video. I'm guessing you just drill right into the bottom bumper.
Great color ! Great mod! Cheap - I like it! I want one in carbon fiber layout. Great wheel selection as well.
Not bad. Love your blacked out grill BTW. As for the front lip, I am a 1-piece guy and I am a body-color guy (I have a 2017 Iridium). I just bought the Stillen 1-piece front lip for $160 and will have it painted body color. But this is not a bad option for those that like a black lip and don't mind 3 pieces.
This will be a future mod for me, I have been buying ebay products for years.
Excellent install lip is perfect with that color combo
Worked out very well with the Grille
I subbed not even 20 seconds in, and I don’t regret it
Really sets the car off nicely.
Wow,came out super clean.
Thank you
For the middle section is there any gaps at all between the lip and bumper or does it sit flush against the bumper all the way across?
I would recommend strut rods to hold the lip up you don't have to worry about it flying off when you're driving 😉
for mocking up the placements I would recommend double sided tape.
I really wanted that iridium.. only reason I don’t mind the silver is because the carbon fiber will stick out more.
but lord knows this was my first choice!!!!!
Sick!! Looks really well yes! Just ordered mine but for my Lexus rcf. Thank you!!! For telling me to get the PP kind cuz that's is quite an excellent advice! Honestly I ordered earlier just happen to come across your video but luckily I looked and was PP so thank you again!
Going to purchase. Thanks my man...just bought a 2018 Q50 Luxe. Time to do some mods.
Did you screw the lip in the existing holes in the bumper ?? Or you just made new holes in the bottom of the bumper to screw in the lip ?
Great video bro.. just found your channel and you’re helping me out a ton.. I’m considering purchasing the same lip for my 2018... just wanted to follow up and see if it’s still holding up strong even a year later?
This design is much better thqn the one i got for my 15S. It was abs and it did snap on the wrap around on each side of the bumper. Also the 3 piece conected via holes that did not overlay but just butted up together. I personally do not like the 3 piece look but no one looks that hard so it just looks like a one piece. I would love if you ordered one of the CF ones but they are over priced for sure. Especially for an item thats going to get banged up with debris.
Yes most definitely it will get damaged or stolen.
@@BoostInMotion so i clicked the link for the 14-17 sport model link and it says in thei description it wont fit the sport? Also it says its made of high grade ABS? what gives man why link us to what you advocated against? PPT OR PU splitters?
That looks freaking good
This fit too perfect, probably not universal
Looking dope Homie. That Blue be popping tho.
Thanks
Polyurethane is the one to use?
Looks great, thanks fam
some advice, I put a ton of 3m tape on the side pieces. The side pieces also screw in to a much more solid place on the car. The middle piece WILL pull down on you if you use the tiny screws they give you. I bought much bigger screws and don have any problems.
WINNING what size screws did you buy? Do they hold well?
Cains_brother not sure but they were the thickest screws they had. Maybe #24 x 1.5”.
Looks killer man!!! 👍🏻👍🏻
You're supposed to screw all three pieces together before installation (you can't if they're install individually, because they screws together from the back).
Thank you
Looks really good ,good job gro
Congratulations, it was very good! I'm following. Hugs from Brazil!
Hey Bro!
On the edge/ends of the lip did you install screws too ?
There’s a screw there already for the bottom cover
Yes
How has it held up looks good
That’s really nice..!!!!
One more thing.. You been working out? Lol.. Getting some guns there. 😉
I've been picking up iron💪🏾💪🏾
Do u think adding some 3m double sided molding tape with the screws would be overkill?
Nope, safe than sorry
Do it drill extra holes
I put 3m also but you dont really need it because the side pieces screw into a pretty solid part of the car. The front piece has no place to put 3m. Just get much bigger screws.
Looks so aggressive! Awesome.
Looks meaner! What's your take on those rear bumper diffusers I've seen on eBay as well?
I just got one!!!!
Do you just make new holes to hold up the lip? Like drill new holes into the bottom?
I believe so
looks great
I recently bought a lip for my Q50 3.7 but it doesn’t seem to fit , I need help
That means you bought the wrong lip
Are these lips paint-able? I want mine to match the color of the car for sure
do you recommend the ones like this that are 3 piece or the ones that are one piece?
Look nice my dude..not bad at all
Thank you
Link for the '14-17 Sport gives me a non-sport lip.
At this current moment there's only the three piece ones on the market.
Are those the ones you want
Good stuff as always 🙏 I click on the link to order for the sport but it doesn’t said pp or pu material so how do I know 🤷🏿♂️.
Sang Chula In the Description tab there’s a section called ‘Item Specifics’. In that section, look for the row that shows ‘Material: PP’
So PP is essentially the same as PU? I'm familiar with urethane, but not the other material
Polypropylene is actually a little bit more durable.
@@BoostInMotion Thanks man! Sweet! Trying to figure out a Christmas present for wifey to buy me. haha. I'm in NYC too...SI. Love your channel, I'm new to the platform so still learning.
I like it my woe! Keep it up
Thanks
No doubt. I can’t wait till I get the. 2021 Infiniti I’m excited to see what’s to come.
Looks better, sportier.
So what’s the materials not to use
Nice bro
Great video,
Thank you
bro i have a 2013 m37 can you recommend witch splitter to purchase cause i can't find one on ebay spicifically made for my vehichle
It look good brother
Mine didn't come predrilled should I just drill right threw I can see where it should be holes?
yes also i drilled tiny holes into the bumper. I used bolts and nuts to secure and so they won't move
@@BoostInMotion I just tired to install it didn't work out the middle piece point up to the sky the sides are ok but when applying pressure drilling into the bumper it makes that middle piece point up idk what to do
Ey boost whaen you installing that ebay splitter on did you take out that screw by the end of each side under that holds that bumper and plastic piece together it seems to be on the way of the end piece of the splitter?
I don't remember taking off any bolts or screws
Boost In Motion i got the 3 piece that has only 2 triangles in the middle a little short on the sides... wrong fit, thanks anyway!
I have an Amazon jump off & it’s... MEH...The screws were horrible. Luckily I had self-tapping pan head screws & used double sided tape. The fitment of the lip doesn’t really line up under the fog light inserts, but that’s only if you put your nose right up on it. I even put an Amazon rear deck spoiler & that looked good.As for your ride, it looks good.
Thank you my fitment is 9/10. Maybe it was a bad mold
Boost In Motion I got this on my Q50... JDM EAU Style Painted Gloss Black Trunk LID Spoiler Wing, I’m thinking about getting the M4 style one though. Thinking about the rear diffuser too
@@0nesh0t0311 I put one on my 2018 and it fits perfect. You prob dont have it lined up correctly.
WINNING.... oh I made sure I aligned it correctly. But fuck it, I spent under $90 for it & unless someone got their nose right in it you really don’t notice.
0nesh0t0311 what size self-tapping screws did you use?
Can you put any body kits on an Infiniti q50 Hybrid sport??
Dam...Damm Dammm it look Amazing with that Blue Bro : )
Thank you
Do you screw holes in the car ? The bottom
Later I drilled out small holes and use nuts and bolts so that the lip doesn't pop off
Did yours not come with the double sided tape or did you choose not to use it?
i would never use tape it will peel off
Correct me if I'm wrong, but shouldn't that double sided tape be used in combination with the screws? I had to remove a OEM wing on a 370Z and even though it was screwed tightly in place, there was still 3M double-sided tape all around...
@@MrBenito1301 yes this is what I was implying. I used the double sided tape to hold the position and then screw it into the bumper. Easy peasy
Sweet I like that. But I really don't do EBAY....
Is this considered painted?
Yo dude I need that frount lip for my Infiniti q50 where can I find it?
How does it hold up in the carwash?
just fine i bolted it down
Good evening is to say hi. Goodnight is to say bye
Lol yes i know
Its nice
Will that lip fit my 2017 q50
No check my description below I have the link to 2014-2017
Bruh why would putting that on the car be an option. I rest nothing on paint
i fuck with it! good work bro!
Apreciate u
I’m getting one!!!
I had this it flew away (200+ kph)
I took it up too 130. But i also have alot of screws
@ WoWi 200+ kph? Go back to China with talk like that.
@@BoostInMotion I had 14 screws :-P
I like I like👍🏾👍🏾
Thanks
I thought it was one piece lips